• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.577-589
• /
• 2002

There are several variations in normal mastication. In them, unilateral mastication is chewing, predominantly on a preferred side of the dentition and hardly on e non-preferred side. Continual unilateral mastication may alter the coordination of masticatory muscles. Although they studied about these EMG of masticatory muscles, there were no information about characteristics of masticatory muscle activity in unilateral mastication. Therefore, In this study, we investigated the activity of the masseter and anterior temporal muscles during rest, clenching in maximum intercuspation and gum chewing in habitually unilateral mastication group compared with normal group and tried to know effects of continual unilateral mastication on activity of masticatory muscles. The results of this study were as follows 1. In electromyographic activity during rest, in bilateral mastication group pattern of muscle activity of right and left side was symmetrical. But, in unilateral mastication group, records of anterior part of temporal muscle was higher than that of bilateral mastication group (p<.01) and patterns of muscle activity of right and left side in both muscle were asymmetrical.(p<.05) 2. In electromyographic activity during clenching in maximum intercuspation, records of superficial part of masseter muscle were higher than anterior part of temporal muscle in both group. Muscle activity of temporal muscle in unilateral mastication group was a little higher han bilateral mastication group and asymmetry of activity pattern in temporal and masseter muscle was shown but these differences were not statistically significant. (p<.05) 3. In electromyographic activity during gum chewing, temporal muscle was activated earlier than masseter muscle and maximum bite force is derived from masseter muscle in both group. In unilateral mastication group, electromyographic activity of masseter and temporal muscle of preferred chewing side, regardless of right or left side chewing, was higher than that of bilateral mastication group and especially, difference in masseter muscle was statistically significant. (p<.01) Based on the above results, our study suggested that recording of masticatory muscle activity will be helpful in the effective diagnosis and treatment of some types of the parafunctional habits.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.371-381
• /
• 2005

The masticatory function of tooth is maintained by the periodontal health, and periodontal health is also maintained by the masticatory function. Bite forces are withstanded by the PDL, and this thought to be through the viscoelastic theory. Mobility test and Bite force test are used to evaluate the viscoelastic theory of the PDL. In this study, the bite force test was used. In the same conditions of quantity of the supporting tissue, the maximum bite force according to the quality of the supporting tissue was evaluated. The study was conducted on 40 patients with moderate adult periodontitis, who were indications to the modified widman flap treatment. The maximum bite force in the premolar and molar regions were tested before treatment, 3weeks and 4 weeks after treatment. and the results were as follows. 1. In the premolar region, 3 weeks and 4 weeks after treatment showed higher maximum bite force than before treatment. And in the molar region the maximum bite force decreased 3 weeks after treatment, but increased after 4 weeks, compared to before treatment. 2. In the 1st premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 3. In the 2nd premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 4. In the 1st molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. 5. In the 2nd molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. From the results above, it shows that there were improvements in the maximum bite force through specific periodontal treatments, and thus it can be considered in clinical situations, that selection of the prosthodontic material, decisions of extraction, evaluation of the prognosis after periodontal treatment is a helpful method.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.265-274
• /
• 2006

Temporomandibular joint (TMJ) internal derangement, especially disc displacement with reduction (DDwR) is the most common TMJ arthropathy and has been thought to do some effects on masticatory performance. Measuring of maximal bite force has been widely used as objective and quantitative method of evaluating masticatory performance, but previous studies showed various results due to various characteristics of subjects and different measuring devices and techniques. In a few studies about the correlation of bite force and temporomandibular disorders (TMD), some authors reported that bite force and masticatory performance would be reduced in patients with TMD because of pain. But the correlation of changes in structure of articular disc and masticatory performance has not been well investigated yet. In this study, to investigate the influences of non-painful disc change on the masticatory performance, we measured the value of maximal bite force, occlusal contact area and occlusal pressure of 39 patients with non-painful DDwR of the TMJ using pressure sensitive film, and compared it with that of 59 controls. The results are summarized as follows: 1. The maximal bite force (P<0.01) and the occlusal contact area (P < 0.05) of the DDwR patients were greater than the controls. 2. There was no significant difference in occlusal pressure between the DDwR patients and the controls (P > 0.05). 3. The maximal bite force of the male group was greater than that of the female group (P < 0.05). However, the occlusal contact area and the occlusal pressure between the male and the female group didn't show significant difference (P > 0.05). From the results above, we can suggest that DDwR could be a factor of changing bite force, but more controlled, large scaled and EMG related further study is needed.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.97-101
• /
• 2009

STATEMENT OF PROBLEM. Unlike screw-retention type, fixture-abutment retention in Locking taper connection depends on frictional force so it has possibility of abutment to sink. PURPOSE. In this study, Bicon$^{(R)}$ Implant System, one of the conical internal connection implant system, was used with applying loading force to the abutments connected to the fixture. Then the amount of sinking was measured. MATERIAL AND METHODS. 10 Bicon$^{(R)}$ implant fixtures were used. First, the abutment was connected to the fixture with finger force. Then it was tapped with a mallet for 3 times and loads of 20 kg corresponding to masticatory force using loading application instrument were applied successively. The abutment state, slightly connected to the fixture without pressure was considered as a reference length, and every new abutment length was measured after each load's step was added. The amount of abutment sinking (mm) was gained by subtracting the length of abutment-fixture under each loading condition from reference length. RESULTS. It was evident, that the amount of abutment sinking in Bicon$^{(R)}$ Implant System increased as loads were added. When loads of 20 kg were applied more than 5 - 7 times, sinking stopped at $0.45{\pm}0.09\;mm$. CONCLUSION. Even though locking taper connection type implant shows good adaption to occlusal force, it has potential for abutment sinking as loads are given. When locking taper connection type implant is used, satisfactory loads are recommended for precise abutment location.

• Journal of Oral Medicine and Pain
• /
• v.45 no.3
• /
• pp.49-55
• /
• 2020

Purpose: This study investigated the association between the objective indicator of masticatory function assessment and the masseter muscle thickness (MMT) using ultrasound imaging. Methods: A total of 99 subjects (males: 24, females: 75, mean age: 76) were analyzed. The maximum bite force (MBF) was measured with a pressure-sensitive sheet and an image scanner. The mixing ability index (MAI) was calculated by image analysis after asking the subjects to chew a wax specimen. The MMT during rest and clenching were obtained with a diagnostic ultrasound system, and the difference in MMT during rest and MMT during clenching was defined as the difference in masseter muscle thickness (DMMT). Multiple regression analysis was performed to determine the independent variables affecting MBF and MAI. Results: The MBF showed correlation with the number of remaining teeth (β=0.346, p=0.002) and DMMT (β=0.251, p=0.011). The MAI correlated with only the number of remaining teeth (β=0.476, p<0.001). Conclusions: The DMMT reflects the state of masseter muscle contraction, and can be used as a predictor as well as the number of teeth when assessing masticatory function.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.247-254
• /
• 2001

Silent period(SP) is transient stops of muscle activity that are induced by mechanical or electrical stimulus and the duration of silent period is a important parameter that have been associated with symptoms of masticatory dysfunction. Muscle fatigue is induced by sustained muscular contractions. It is associated with the external manifestations as the inability to maintain a desired force output, muscular tremor, and localized pain. Muscle fatigue is a parameter that have been measured or monitored the deterioration of a performance of muscles. On the study of relationship between SP and masticatory muscle fatigue, Nagasawa suggested that SP increases up to 3 min. from the beginning of clenching when the subjects performed sustained contractions at 50% maximum clenching level. In this paper, in order to evaluate a relationship between SP and muscle fatigue, 10 SPs per 1 minute are measured at 10%, 20%, 50% maximum clenching level. We used the median frequency in order to quantify the degree of muscle fatigue. However, the results shows that the duration of silent period was not significantly affected by differing levels of muscle fatigue. Therefore, we suggest that the SP is not increased or decreased as the results of muscle fatigue, also the origin of the SP generation mechanism is discussed.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.623-635
• /
• 2011

Over the past few decades, the proportion of elderly people with depression in Korea has been rapidly increasing. The purpose of this study is to explore relative effects of health and family factors on geriatric depression. The data sources are from Korean Longitudinal Study of Aging(2008). The Analysis sample consists of 4,040 cases. Analysis results show that there is a significant variability in geriatric depression according to sociodemographic characteristics, health characteristics, and family characteristics. Hierarchical logistic regression analyses are employed to assess the causal relationship between health characteristics and geriatric depression. Model II showed that ADL(exp(B)=1.732), having difficulties due to sight deterioration(exp(B)=1.398), having difficulties due to masticatory force deterioration(exp(B)=1.414), having difficulties due to pain(exp(B)=2.435), and subjective health status(exp(B)=2.010) are reported as predictors of geriatric depression. Namely, the probability of having geriatric depression of the above predictors has been 1.7 times, 1.4 times, 1.4 times, 2.4 times. 2.0 times higher than normal figures. Among health characteristics, pain is the most prevalent factor. Model III showed that as for family characteristics, coresiding with children(exp(B)=1.312) and frequency of contacting with children by phones, letters, or emails(exp(B)=1.477) are reported as predictors of geriatric depression. Key findings are that health factors have larger effects than family factors on geriatric depression.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.159-166
• /
• 2018

Objectives: The aim of this study was to investigate the association between masticatory ability, oral health-related quality of life, and cognitive function in an elderly population using structural equation modeling. Methods: A total of 308 subjects, aged 65 years and over, were recruited from the senior citizen center in Daegu, South Korea and provided consent for inclusion in the study. The Korean version of the Mini-Mental State Examination (K-MMSE) was used to assess the level of cognitive function. Masticatory ability was evaluated through chewing tests, patient-perceived masticatory function and, measurement of relative occlusal forces on molar teeth using the T-Scan $III^{(R)}$ system. All data were analyzed using ${\chi}^2$ tests, t-tests, and one-way ANOVA in SPSS version 23.0 for windows. Structural equation modeling was performed using SPSS AMOS version 22.0. Results: There was a significant association between cognitive function and molar teeth occlusal force. Ability of food chewing score and patient-perceived masticatory function could affect oral health-related quality of life (P>0.05). Higher occlusal forces on molar teeth, compared to anterior teeth, positively correlated with higher cognitive function. Conclusions: These results suggest that an individual's oral health condition could affect molar teeth occlusal forces and may be related to a risk of developing dementia. Therefore, there is a need for implementing nation-wide policies to improve oral health, such as masticatory function, in the elderly population.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.187-197
• /
• 2013

PURPOSE. The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS. Three-dimensional finite element models, representing mandibular molars, comprising a prepared tooth, cement layer, zirconia core, and veneer porcelain were designed by computer software. The shoulder (1 mm in width) variations in core were incremental increases of 1 mm, 2 mm and 3 mm in proximal and lingual height, and buccal height respectively. To simulate masticatory force, loads of 280 N were applied from three directions (vertical, at a $45^{\circ}$ angle, and horizontal). To simulate maximum bite force, a load of 700 N was applied vertically to the crowns. Maximum principal stress (MPS) was determined for each model, loading condition, and position. RESULTS. In the maximum bite force simulation test, the MPSs on all crowns observed around the shoulder region and loading points. The compressive stresses were located in the shoulder region of the veneer-zirconia interface and at the occlusal region. In the test simulating masticatory force, the MPS was concentrated around the loading points, and the compressive stresses were located at the 3 mm height lingual shoulder region, when the load was applied horizontally. MPS increased in the shoulder region as the shoulder height increased. CONCLUSION. This study suggested that reinforced shoulder play an essential role in the success of the zirconia restoration, and veneer fracture due to occlusal loading can be prevented by proper core design, such as shoulder.

• Journal of Oral Medicine and Pain
• /
• v.12 no.1
• /
• pp.47-52
• /
• 1987

In order to evaluate the effect of signs and symptoms of temporomandibular disorders on the bite force of anterior teeth, the author estimated a feature of maintaining the maximum bite force on central incisors in Korean 34 adult females with signs and symptoms of temporomandibular disorders (TMD group) and in Korean 31 adult females within normal masticatory function far from any sign or symptom of TMD (control group), and analyzed the data statistically. The obtained results were as follows: 1. There was not a significant difference of the maximum bite force on central incisors between TMD group and control group (P>0.05). 2. The duration of maintaining the maximum bite force on central incisors in TMD group was shorter than it in control group (P<0.01).