• The Journal of Sustainable Design and Educational Environment Research
• /
• v.13 no.1
• /
• pp.50-57
• /
• 2014

The educational facilities is the facility wining the specific gravity which is the most abundant by 269s (25.5%) among the godfather lease application facilities (1056)s of the abolition of school. In case of reusing the closing down a school as the educational facilities there is no legal matter which is under the separate punishment in comparison with the other facility according to the materials of the Ministry of Environment in 2013, and I am analyze that minimum cost is spent on a remodeling and it is most much used. The pattern study thinks about a purpose with the master plan through the plan characteristic derivation according to the analysis of current situation of the domestic closing down a school application educational facilities in which the related study is nonexistent and type in the educational facilities plan of the closing down a school still afterward in being utilized for reference data and guide book.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.76-79
• /
• 2000

Polymeric composites exhibit highly nonlinear and rate dependent behavior during loading and unloading in off-axis directions. The equilibrium state of stress during loading is lower than the state of stress produced at finite strain rates. The amount of stress relaxation during loading decreases. Interestingly, however, the stress goes up to reach to the equilibrium state of stress for a fixed displacement during unloading. The unloading behavior is quite similar to the loading behavior. The stress relaxation patterns during loading and unloading is also similar, and those depend on the fiber orientation angles and the loading and unloading rates. The AS4/PEEK thermoplastic composite is used to characterize the relaxation behavior for different off-axis angles and loading rates. There exists a transient loading region at the beginning of unloading. The effective stress and effective plastic strain concept is used to establish a master curve of stress recovery pattern for different off-axis angles and unloading rates.

• Journal of the Korean housing association
• /
• v.10 no.2
• /
• pp.185-193
• /
• 1999

This study aims to identify the usage behavior of An-bang space in apartment dwellers through the perception, the residential life style and the use of furniture. The data is collected from interviewing housewives through questionnaire designed for this study. The 210 date were analyzed by using Frequencies, Mean, Factor analysis, ${\chi}^2-test$, t-test, one-way ANOVA and scheffe-test. The main results of the study are as follows: (1) It is called An-bang' or 'large room' rather than 'master's bedroom' although it is recognized as exclusively couple-oriented space. And are founded to be different designation and perception on An-bang space. (2) The residential life style in An-bang is classified as family-centered gathered, rest entertainment, make-up fitting and hobby. And it has significant differences among dwellers according to their personal characteristics. (3) The furniture style and arrangement pattern are mostly modern ones and 'ㄷ' type.

• Journal of Energy Engineering
• /
• v.9 no.4
• /
• pp.358-365
• /
• 2000

본 연구에서는 수직 단일관에서의 재관수(reflux) 응축 현상에서 증기유량이 역류제한치보다 큰 경우에 발생하는 다양한 유동 패턴을 예측하고, 그 동적 특성을 해석하기 위한 모델을 개발하였다. 특히 L/D가 큰 재관수 응축기에서 발생하는 충전 방출 모드에서의 동적 특성을 예측하는 것이 목표이다. 응축기의 내부를 액체와 증기의 두 영역으로 나누어 질량, 에너지, 운동량 보존에 입각한 본 모델은, 형성된 물기둥의 진동시 갈래질 경계(bifurcation boundary)와 진동주기를 예측할 수 있다. 이 모델은 McMaster 대학에서 수행한 실험결과와 비교한 결과 양호한 예측을 했고, 튜브 직경변화 효과를 잘 묘사하였다. 이러한 단순 모델은 재관수 응축기의 설계시에 설계변수를 도출하는데 사용될 수 있고, 인위적으로 부여한 압력펄스를 이용하여 재관수 응축기의 운전영역을 개선하는데 기초로 활용될 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.29-36
• /
• 2004

In this paper, a new replication technique for a real 3D microstructure was introduced, in which a master Pattern WES made of photo-curable epoxy using a microstereolithography technology, and then it was transferred onto an epoxy-copper particle composite. A helical gear was selected as one of the real 3D microstructure for this study, and it was replicated from a pure epoxy to an epoxy composite. In addition, the transferability of the microreplication process was evaluated, and the properties of :he epoxy composite were compared to that of the pure epoxy, including hardness, wear-resistance and thermal conductivity.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.311-322
• /
• 1998

Modular BOMs are typically used in TWO-Level Master Production Schedule. To solve the problems of Modular BOM generation and efficient DB construction, we proposed Value Clustering Method. Based upon Where-Used matrix of products and components, VCM is the method to find out module by generating product family group value, product value, and component value. We also proposed method to find out information about Modules, algorithms to find out Modules that show Alternative Usage Pattern, and method to find out Modules used in a given product. We also compared the DB creation method by Value Clustering Method and by conventional method. We compared the size of DB in both methods. We mathematically proved that the proposed method is doing better as the size and complexity of product family gets larger and more complicated.

• Journal of Korean Library and Information Science Society
• /
• v.36 no.1
• /
• pp.117-130
• /
• 2005

This study is to examine the research trends of bibliotherapy in Korea through an analysis of databases(monograph, master's and doctor's dissertations, and journal articles) in National Assembly Library and to analyze the citations and documents in various aspects(year, field, object, pattern) . The study is to present basic data for bibliotherapist and researcher and to indicate the direction of their study in the future.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.624-627
• /
• 2005

In this paper, we investigated the possibility of replicating patterned media by nano-injection molding process with a metallic nano-stamper. The original nano-master was fabricated by I-beam lithography and ICP etching process. The metallic nano-stamper was fabricated using a nanoimprint lithography and nano-electroforming process. Finally, the nano-patterned substrate was replicated using a nano-injection molding process without additional etching process. The replicated patterns using nano-injection molding process were as small as 50nm in diameter, 150nm in pitch, and 50nm in depth.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.8-14
• /
• 2007

Recently, the variation of industry has been changed faster and faster than before. It is using Rapid Prototyping Method to cope with fast change. This technology used to make a prototype, master pattern of manufactured product by vacuum casting, and so on. But this method has errors by contraction as a necessity. this error has been caused because the shape of prototype is smaller than CAD data. So we must solve the problem about precision of product. Therefore in this study, we will reduce the errors like contraction of material by manufacturing of rapid prototype product. Through these courses, we will enhance a precision of product.

• BMB Reports
• /
• v.45 no.10
• /
• pp.577-582
• /
• 2012

single-minded (sim) is a master regulatory gene that directs differentiation in the central nervous system during Drosophila embryogenesis. Recent identification of the mesectoderm enhancer (MSE) of sim has led to the hypothesis that two Snail (Sna)-binding sites in the MSE may repress sim expression in the presumptive mesoderm. We provide evidence here that three Sna-binding sites proximal to the sim promoter, but not those of the MSE, are responsible for the mesodermal repression of sim in vivo. Using transgenic embryos injected with lacZ transgenes, we showed that sim repression in the mesoderm requires the three promoter-proximal Sna-binding sites. These results suggest that Sna represses the mesectodermal expression of sim by directly repressing the nearby promoter, and not by quenching adjacent transcriptional activators in the MSE. These data also showed how the MSE, lacking the three proximal Sna-binding sites, reproduced the endogenous pattern of sim expression in transgenic embryos.