• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권2호
• /
• pp.74-78
• /
• 2006

This paper presents a high-speed pulse-based flip-flop with pseudo MUX-type scan compatible with the conventional master-slave flip-flop with MUX-type scan. The proposed flip-flop was implemented as the standard cell library using Samsung 130nm HS technology. The data-to-output delay and power-delay-product of the proposed flip-flop are reduced by up to 59% and 49%, respectively. By using this flop-flop, ARM11 softcore has achieved the maximum 1GHz operating speed.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.365-376
• /
• 2005

A prototype of the Bridge Transported Servo Manipulator (BTSM) system has been developed to do operation and maintenance jobs remotely in a hot cell. The system consists of a telescopic transporter, a slave arm, a master arm, and a control system. In this paper, the system is introduced and several performance test results are presented. The results have been used to design an upgraded system that will be used during demonstrations of the advanced spent fuel conditioning process.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1182-1192
• /
• 2019

In order to improve the conversion efficiency and mitigate the EMI problem of conventional hard-switching inverters, a new soft-switching DC-AC inverter with a compact structure and a low modulation complexity is proposed in this paper. In the proposed structure, resonant inductors are connected in series for the arm branches, and resonant capacitors are connected in parallel for the neutral point branches. With the help of resonant components, the proposed structure achieves zero-current switching on the arm branches and zero-voltage switching on the neutral point branches. When compared with state-of-art soft-switching topologies, the proposed topology does not need auxiliary switches. Moreover, the commutation algorithm to realize soft-switching can be easily implemented. In this paper, the principle of the resonant operation of the proposed soft-switching converter is presented and its performance is verified through simulation studies. The feasibility of the proposed inverter is evaluated experimentally with a 2.4-kW prototype.

• 복식문화연구
• /
• 제5권3호
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.189-199
• /
• 2004

기계식 마스터-슬레이브 매니퓰레이터의 결점인 접근 지역의 제한을 극복하기 위해 차세대관리 공정장치 원격 유지보수용 천정이동 서보 매니퓰레이터(Bridge Transported Servo Manipulator, BTSM) 시스템을 개발하고 있다. 서보 매니퓰레이터는 핫셀 내 천정이동 브릿지(bridge)에 부착되는 슬레이브 매니퓰레이터와 핫셀 밖 운전지 역에 설치되는 마스터 매니퓰레이터로 구성된다. 각각의 매니퓰레이터는 몸체 회전, 상부 팔 틸트(tilt), 하부 팔 틸트, 하부 팔 회전, 손목 팬/틸트(pan & tilt) 및 잡는 운동(grasp motion)의 7 자유도를 갖는다. 하부 팔 회전, 손목 팬/틸트 및 잡는 운동은 매니퓰레이터의 무게에 비해 취급 용량을 크게 하고, 마찰을 작게 하기 위하여 와이어 구동 메카니즘을 채택하였다. 그러나, 와이어 구동 메카니즘은 한 축이 움직일 때 다른 축도 영향을 받을 수 있는 단점이 있다. 본 논문에서는 이와 같은 단점을 극복하기 위해 와이어 구동 링크(link) 사이의 전달 특성을 수식화 하였다. 와이어구동 링크들간의 전달특성 분석 및 실험을 통해서 이들의 기대하지 않은 동작 특성을 확인하였다. 또한, 제안한 보상식을 통해서 기대하지 않은 동작을 크게 줄일 수 있음을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.68-73
• /
• 2006

본 논문에서는 SoC(System On a Chip)의 효율적인 설계와 빠른 검증을 위해서 Active-HDL과 Matlab의 Simulink를 연동하여 HDL, SystemC 및 알고리즘 레벨의 추상화를 동시에 통합하여 시뮬레이션 할 수 있는 방법론을 제시하고, 이를 이용한 다채널 스피커의 직렬연결 기법을 설계 및 구현하였다. 구현은 ARM 프로세서와 Xilinx Virtex4 FPGA를 기반으로 하고 AMBA 버스를 사용하여 연동하는 SoC Master 보드 상에서 이루어졌다. 이러한 방법은 하드웨어 부분의 RTL 코드를 IP화하여 소프트웨어 부분과 동시에 검증 할 수 있는 장점을 가지고 있으며 직렬 연결 스피커 시스템과 같이 많은 신호처리를 하는 부분에서 쉽고 빠르게 설계를 진행할 수 있음을 보였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.626-637
• /
• 2014

On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Navigation System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a $H_{\infty}$ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of $H_{\infty}$ filter. Based on the classical "attitude plus velocity" matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with $H_{\infty}$ filter, respectively. Simulation results indicate that $H_{\infty}$ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1520-1524
• /
• 2004

This paper describes the development of a robotic maintenance system for use in a maintenance operation of the nozzle dam in a water chamber of a steam generator at the Kori nuclear power plant in Korea. The robotic maintenance system was designed to minimize the personnel exposure to a hazardous radioactive environment. This robotic maintenance system is operated by a teleoperated control which was designed to perform the nozzle dam maintenance tasks in a remote manner without endangering the human workers. Specific maintenance tasks involve the transportation, insertion, and removal of nozzle dams in a water chamber inside a steam generator via a narrow man-way entrance port. The developed robotic maintenance system has two major subsystems: a two degrees of freedom guiding device acting as the main guiding arm and a master-slave manipulator with a kinematic dissimilarity. The mechanical design considerations, control system, and capabilities of the robotic maintenance system are presented. Finally, a graphical representation of the nozzle dam maintenance processes in a simulated work environment are also demonstrated.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.27-32
• /
• 2022

RISC-V is an open instruction set architecture (ISA) developed in 2010 at UC Berkeley, and active research is being conducted as a processor to compete with ARM. In this paper, we propose an SoC system including an RV32I ISA-based 32-bit 5-stage pipeline processor and AHB bus master. The proposed RISC-V processor supports 37 instructions, excluding FENCE, ECALL, and EBREAK instructions, out of a total of 40 instructions based on RV32I ISA. In addition, the RISC-V processor can be connected to peripheral devices such as BRAM, UART, and TIMER using the AHB-lite bus protocol through the proposed AHB bus master. The proposed SoC system was implemented in Arty A7-35T FPGA with 1,959 LUTs and 1,982 flip-flops. Furthermore, the proposed hardware has a maximum operating frequency of 50 MHz. In the Dhrystone benchmark, the proposed processor performance was confirmed to be 0.48 DMIPS.

• 방사성폐기물학회지
• /
• 제3권3호
• /
• pp.257-268
• /
• 2005

본 논문에서는 핫셀에서의 원격 운전 및 유지보수 작업을 위해 개발한 천정이동 서보 조작기시스템에 대해 소개한다. 조작기 시스템은 텔레스코픽형 이송장치, 슬레이브, 마스터, 그리고 제어시스템으로 구성되어 있다. 개발한 시스템에 대해 위치 추종, 하중 취급, 신뢰성, 및 조작성에 대한 테스트를 수행하였으며 이에 대한 테스트 결과를 제시한다. 이러한 테스트 결과를 바탕으로 개선된 시스템 이 설계되었으며 이 개선된 시스템 이 차세대 공정의 실증에 적용될 예정이다.