• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1616-1622
• /
• 2022

Selenium has been identified as an element of interest for the safety assessment of a deep geological repository (DGR) for used nuclear fuel. In Canada, groundwaters at DGR depths in sedimentary rocks have been observed to have a high ionic strength. This paper examines the sorption behavior of Se(-II) onto illite, MX-80 bentonite, Queenston shale, and argillaceous limestone in Na-Ca-Cl solutions of varying ionic strength (0.1-6 mol/kgw (m)) and across a pH range of 4-9. Little ionic strength dependence for Se(-II) sorption onto all solids was observed except that sorption at high ionic strength (6 m) was generally slightly lower than sorption at low ionic strength (0.1 m). Illite and MX-80 exhibited the expected results for anion sorption, while shale and limestone exhibited more constant sorption across the pH range tested. A non-electrostatic surface complexation model successfully predicted sorption of Se(-II) onto illite and MX-80 using the formation of an inner-sphere surface complex and an outer-sphere surface complex. Optimized values for the formation reactions of these surface species were proposed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.9-14
• /
• 2004

이 논문에서는 다중 프로브 교정 시 발생하는 오차를 측정하여 보정함으로써 측정 정밀도를 향상시킬 수 있는 프로그램을 개발에 대하여 연구하였다. 교정 시와 동일한 조건으로 기준구를 측정하여 오차를 산출한 다음 프로브 파라미터가 기록된 시스템 파일을 수정함으로써 교정 오차를 보정하는 프로그램을 개발하였다. 실험 결과 이론값과 실제값의 차가 CMM 분해능의 2배 이내임을 확인하였으며 프로그램은 CMM 사용자가 직접 작성 및 편집 가능하도록 DMIS 언어를 사용하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.311-311
• /
• 2003

본 연구의 목적은 대학생이 계절별로 선호하는 셔츠와 블라우스용 소재의 색상을 분석하고 이의 계절에 따른 차이를 비교하며, 셔츠와 블라우스용 선호소재의 색상을 비교하기 위한 것이다. 조사대상은 남녀학생의 109명으로, 1차 연구에서 조사된 각 계절별 선호직물 10종을 시료로 선정하고 색차계(Color Quest Sphere II)를 이용하여 Spectral Data와 Color Plot, Master Color Data, Trend Plot등의 색상자료를 측정하였다. (중략)

• 한국주거학회논문집
• /
• 제25권3호
• /
• pp.1-12
• /
• 2014

Korean traditional house has inherented construction characteristics that contain human requirements with the adaptation to nature's order. As for traditional buildings, there are a lot of facilities like palaces, Buddhist temples, Confucianism architectures, government facilities, etc. Among them, housing construction is not only closely connected to our lives, but also plays an important role to connect our lives from the past to present. The master room in a traditional korean house is responsible for playing a center role of the residential life which implies the traditional values responsible for multi-functions and it is also the sphere of the living space. Therefore, this thesis considers the residential environmental adjustment method and the behaviors centered around the main buildings of Jeonnam Province. And also investigates the main reason for windows and doors formation. From this, we would like to further evaluate the master room life, and the inner space constructions following the spacial and organizational analysis of windows and doors. We would like to analyze the space organization methods, environmental adjustment methods and the usages of traditional buildings. Using the modern interpretation as basis, we would like to use the foundation materials to reflect single family housing plans.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.156-161
• /
• 2000

Least Squares and Minimum Zone method are known for obtaining a datum or a continuous approximate function of measured data. This study is for a Minimum Zone algorithm for a circle, which is useful to obtain the exact roundness from the reference circle of measured data. The proposed method is compared with the Least Squares Limacon method and Chrystal-Peirce algorithm. A computational algorithm for the Minimum Zone circle is suggested and results in less roundness than the other two methods. This Minimum Zone circle method will be used for other geometrical measured data, such as plane or sphere for obtaining the exact flatness or sphericity.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.845-852
• /
• 2012

The diaphragm-type stylus probe was developed for ultra-precision on-machine measurement (OMM) application. This probe is equipped with two diaphragms which are parallel and one capacitive sensor is used for detecting the vertical motion of end tip in the stylus when it is contacted to the optical freeform surface. For better performance of proposed probes, several design parameters such as axial stiffness and the lateral deformations were investigated with finite element analysis techniques. To verify the feasibility, the profiles of the master sphere ball were measured on the ultra-precision milling machine. The measurement results show that the proposed probe can calculate the radius of the circle within the accuracy of 0.1 ${\mu}m$ for the ultraprecision optical surface.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.147-159
• /
• 2000

The purpose of this study was the evaluation of spectral transmission of the commercial three shade guides and the relationship of hue, value, and chroma according to the transmission rate. The spectral transmittance of three shade guides - Vita Lumin Shade Guide, Vintage and Unibond Shade Guide, and Vitapan 3D-Master Shade Guide - were measured. For direct transmission measurements, each shade tabs were placed at the entrance port of the 1mm diameter intergrating sphere. The intensity of the light source passing through the shade tabs to the right angle was continuously recorded for wavelength from 400 to 700 nm. A transmission spectrum and digital data were obtained for each measurement and they were evaluated using Microcal Origin program. The obtained results of this study were as follows : 1. In Vita Lumin Shade Guide, sum of the transmission rate of the shade tabs at the wavelength 400-700nm was decreased in agreement with the arrangement order at each A, B, C, D group, except D4 shade tab. However, there were no relationships between the transmission rate of the shade tabs and the value-oriented. 2. In Vintage and Unibond Shade Guide, sum of the total transmission rate of the shade tabs was decreased in agreement with the arrangement order at each A, B, C, B group. When all shade tabs arranged in value-oriented, transmission rate was accord with the order, except D4 shade tab. 3. When shade tabs of the Vitapan 3D-Master Shade Guide have the same value and hue, sum of their total transmission rate decreased in accordance with the chroma-oriented. When the shade tabs have the same value and chroma, there were no differences from the order of the transmission rate to the various hue type. However, in the 'R' tabs of reddish hue type, the transmission rate increased at the long wavelength range area. In conclusion, we need the quantitative analyzing instruments in transmission determination. Vitapan 3D-Master Shade Guide covers the tooth color space taking into account the parameters of the systematic value, chroma, hue oriented, and the transmission rate relatively accorded with that sequence.

• 한국실내디자인학회논문집
• /
• 제13호
• /
• pp.150-160
• /
• 1997

The tendency of the Minimalism in the contemporary a architecture is based on Mies van der Rohe s saying ‘나SS IS m more" as the principle of the Minimal art and its formative c composition. It can be divided into technical Minimalism p prevailed in Northern Europe and the zone of German l language, and the regional one in Southern Europe and S Southern America. The former is interested in the experiences of the techniques and materials, and the latter in that of the s space and the place through the simple forms. The minialistic approach to the architecture is nat only m methodological one. It accepts the concept and the construction of architecture as 2 axes for making it keeps the tradition and c communication with the master builder, the materials, and i염 m means to compound. The expressive characteristics of works in M Minimalism are 1) as the formal issue, it is simple, self-referring. without any symbol or any allusion, and compounds the r repetitive forms as the comceptual aspec않 of architecture, 2) it h has the characteristies such as the approach directly to the m means by which architecture made, the critical interests to the m material attributes, and the capacity to the contemporary t technology as the issue of technique and materials, 3) regarding t the space and the place, it shows the good sense to the site in t the sphere intervention of architecture 1e Maininlalism architecture has i않 impotance in the point t that it seeks to the qualities immanent in architecture by s showing the marvelous status through discovering the i immanent properties of the site, program materials, and the s structure, and also it begins new way of interpreting a architecture with new viewpoint to the its essence as well as a architecture itself.self.

• International Journal of Computer Science & Network Security
• /
• 제22권12호
• /
• pp.116-124
• /
• 2022

Information and communication technologies used in the social sphere are born due to the development of computer technologies. The main task of the distance learning process in higher education institutions is not to provide information, but to teach how to obtain and use it. The purpose of the article: to identify innovative approaches in the training of specialists in higher education institutions in the context of distance learning. Various innovative approaches to organizing the work of students of higher educational institutions in the context of distance learning are considered. Based on the conducted research, it is concluded that each of the approaches described by us outlines the study of the phenomenon of professional training of a specialist in the condition of distance learning. All the described approaches significantly contribute to the improvement of professional training of specialists, encourage students to self-improvement, professional development and enrich their professional competence in modern conditions. The emergence and spread of innovative technologies means not only a change in the activity itself and its inherent means and mechanisms of its implementation, but also a significant restructuring of goals, value orientations, specific knowledge, skills and abilities. Therefore, the current stage of the development of civilization, scientific and technological progress requires the emergence of such specialists who would have broad humanitarian thinking, would have good psychological training, would be able to build professional activities according to laws that take into account the relationship between economic productivity and creativity, as well as the desire of the individual for constant renewal, self-realization. Only such qualities will help you master the specifics of innovative technologies well. We see the prospects in the study of innovative approaches to training specialists in higher education institutions in the condition of distance learning in foreign countries.