• Title/Summary/Keyword: Mass utilization

Search Result 428, Processing Time 0.032 seconds

A Study on the Decisive Factors in Personal Health Maintenance Practice of Housewives Living in Younhi Area Apartments (연희지역 아파트주부의 건강관리실천의 결정요인분석에 관한 조사연구)

  • 김인숙
    • Journal of Korean Academy of Nursing
    • /
    • v.8 no.2
    • /
    • pp.89-102
    • /
    • 1978
  • Owing to the development of modern science, prolonging man's life, the sudden increase of population and betterment of the standard of living has increased health needs. In order to fulfill these health needs, more active plans for developing health should be made. Health education is one of the methods at hand that can improve the health behavior of the community and the individual through the contact of individuals with their groups. Proper understanding of the characteristics of the sampled group and participation of individuals within the community for the development of their health plan are needed for efficient health education. This study was attempted for the purpose of presenting some data helpful for pre-paring the fundamentals of a health education plan that can improve personal health maintenance practice of a community through efficient health education by investigating the relationship between the response of subjects to personal health maintenance practice and selected decisive factors in personal health maintenance practice. The subjects for this study were a systematic sample of 120 housewives selected from 600 housewives from B Zone Apt. Younhi-3-Dong in Seoul. Data was collected for 4 days from May 16th to May 19th, 1578 through personal interviews with questionnaires by well trained interviewers. Percentage, t-test and stepwise multiple regression analysis by use of EDPS were employed for statistical analysis. Results of this study can be summarized : 1. General characteristics of subjects Subjects over 20 and below 40 years of age formed 62.5% of the toed and the rest were subjects of 40 years and upward. 76.7% of the subjects have less than 4 children. 51.3% of the subjects had completed at least the senior high school course. 2. The response of subjects to personal health maintenance practice. Ratios of personal health maintenance practice to the maximum score for each category are as follows; 84.1% in the category of population and family planning, which was the highest ratio; 82.4% in the prevention of accidents; 68.0% in control of communicable disease; 67.8% in personal health care and habits of daily life, 64.3% in mental health and 52.5% in control of parasites, which was the lowest. 3. The response of subjects to selected decisive factors. in personal health maintenance practice. The arithmetic mean of the score for each decisive factor was as follows: the mutual relation between family members marked 18.33, which is under 73,3% of the maximum score; the degree of interest in health marked 34.48, 70.0% of the maximum score: the degree of utilization and demand for health care facilities marked 25.79 or 64.5% of the maximum score and health maintenance of the family marked 11.58, 43.6% of the maximum score. 4. The relationship between personal health maintenance practice and general characteristics of subjects. 1) There was a significant difference in the numbers of children. (t = 1.83, d.f. =117, p< 0.1) 2) There was a significant difference in the contact rates with mass-media, (t = 5.02, d.f. = 118, p< 0,05) 5. The multiple correlation between personal health maintenance practice and their selected decisive factors. 1) The factor“the degree of interest in health”could account for personal health maintenance practice in 43.6% of the sample. (R = 0.6602, R²= 0,4359, F = 91.1678, p< 0.001) 2) When the factor,“health maintenance of family”is added to this, it accounts for 51.2% of personal health maintenance practice. (R = 0.7158, R²= 0.5124, F = 61.4653, p< 0.001) 3) When the factor,“mutual relations between family members”is also included, it accounts for 53.7% of personal health maintenance practice. (R = 0.7324, R²= 0.5365, F = 44.7509, p< 0.001) 4) When the factor, “the degree of utilization and demand for health care facilities”is included, it accounts for 55.1% of personal health maintenance practice. (R = 0.7421, R²= 0.5507, F = 35.2430, p< 0.001).

  • PDF

Nutrient Utilization, Body Composition and Lactation Performance of First Lactation Bali Cows (Bos sondaicus) on Grass-Legume Based Diets

  • Sukarini, I.A.M.;Sastradipradja, D.;Sutardi, T.;Mahardika, IG.;Budiarta, IG.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.13 no.12
    • /
    • pp.1681-1690
    • /
    • 2000
  • A study on energy and protein utilization, and milk production of Bali cows on grass-legume diets was carried out using 12 first lactation cows (initial BW $263.79{\pm}21.66kg$) during a period of 16 weeks starting immediately post calving. The animals were randomly allotted into 4 dietary treatment groups R1, R2, R3 and R4, receiving from the last 2 months of pregnancy onwards, graded improved rations based on a mixture of locally available grass and legume feed ad libitum. R1 contained on a DM basis 70% elephant grass (PP, Penisetum purpureum) plus 30% Gliricidia sepia leaves (GS), R2 was 30% PP plus 55% GS supplemented with 15% Hibiscus tilliactus leaves (HT, defaunating effect), R3 and R4 were 22.5% PP+41.25% GS+11.25% HT+25% concentrate, where R3 was not and R4 supplemented with zinc di-acetate. TDN, CP and zinc contents of the diets were 58.2%, 12.05% and 18.3 mg/kg respectively for R1, 65.05%, 16.9% and 25.6 mg/kg respectively for R2, 66.03%, 16.71% and 29.02 mg/kg respectively for R3 and 66.03%, 16.71% and 60.47 mg/kg respectively for R4. Milk production and body weight were monitored throughout the experimental period. In vivo body composition by the urea space technique validated by the body density method and supported by carcass data was estimated at the start and termination of the experiment. Nutrient balance and rumen performance characteristics were measured during a balance trial of 7 days during the 3rd and 4th week of the lactation period. Results indicated that quality of ration caused improvement of ruminal total VFA concentration, increments being 52 to 65% for R2, R3 and R4 above R1, with increments of acetate being less (31 to 48%) and propionate being proportionally more in comparison to total VFA increments. Similarly, ammonia concentrations increased to 5.24 to 7.07 mM, equivalent to 7.34 to 9.90 mg $NH_3-N/100ml$ rumen fluid. Results also indicated that feed quality did not affect DE and ME intakes, and heat production (HP), but increased GE, UE, energy in milk and total retained energy (RE total) in body tissues and milk. Intake-, digestible- and catabolized-protein, and retained-protein in body tissues and milk (Rprot) were all elevated increasing the quality of ration. Similar results were obtained for milk yield and components with mean values reaching 2.085 kg/d (R4) versus 0.92 kg/d (R1) for milk yield, and 170.22 g/d (R4) vs 71.69 g/d (R1), 105.74 g/d (R4) vs 45.35 g/d (R1), 101.34 g/d (R4) vs 46.36 g/d (R1) for milk-fat, -protein, and -lactose, respectively. Relatively high yields of milk production was maintained longer for R4 as compared to the other treatment groups. There were no significant effects on body mass and components due to lactation. From the relationship $RE_{total}$ (MJ/d)=12.79-0.373 ME (MJ/d); (r=0.73), it was found that $ME_{m}=0.53MJ/kgW^{0.75}.d$. Requirement of energy to support the production of milk, ranging from 0.5 to 3.0 kg/d, follows the equation: Milk Prod. ($Q_{mp}$, kg/d)=[-2.48+4.31 ME($MJ/kg^{0.75}.d$)]; (r=0.6) or $Q_{mp}$=-3.4+[0.08($ME-RE_{body\;tissue}$)]MJ/d]; (r=0.94). The requirement for protein intake for maintenance ($IP_m$) equals $6.19 g/kg^{0.75}.d$ derived from the relationship RP=-47.4+0.12 IP; (r=0.74, n=9). Equation for protein requirement for lactation is $Q_{nl}$=[($Q_{mp}$)(% protein in milk)($I_{mp}$)]/100, where $Q_{nl}$ is g protein required for lactation, $Q_{mp}$ is daily milk yield, Bali cow's milk-protein content av. 5.04%, and $I_{mp}$ is metabolic increment for milk production ($ME_{lakt}/ME_{m}=1.46$).

Development of "Miscanthus" the Promising Bioenergy Crop (유망 바이오에너지작물 "억새" 개발)

  • Moon, Youn-Ho;Koo, Bon-Cheol;Choi, Yoyng-Hwan;Ahn, Seung-Hyun;Bark, Surn-Teh;Cha, Young-Lok;An, Gi-Hong;Kim, Jung-Kon;Suh, Sae-Jung
    • Korean Journal of Weed Science
    • /
    • v.30 no.4
    • /
    • pp.330-339
    • /
    • 2010
  • In order to suggest correct direction of researches on Miscanthus spp. which are promising bioenergy crop, authors had reviewed and summarized various literature about botanical taxonomy, morphology and present condition of breeding, cultivation and utilization of miscanthus. Among the genus of Miscanthus which are known 17 species, the most important species are M. sinensis and M. sacchariflorus which origin are East Asia including Korea, and M. x giganteus which is inter-specific hybrid of tetraploid M. sacchariflorus and diploid M. sinensis. Miscanthus is superior to other energy crops in resistance to poor environments including cold, saline and damp soil, nitrogen utilization efficiency, budget of input energy and carbon which are required for producing biomass and output which are stored in biomass. The major species for production of energy and industrial products including construction material in Europe, USA and Canada is M. x giganteus which was introduced from Japan in 1930s. In present, many breeding programs are conducted to supplement demerits of present varieties and to develop "Miscanes" which is hybrid of miscanthus and sugar cane. In Korea, the researches on breeding and cultivation of miscanthus were initiated in 2007 by collecting germplasms, and developed "Goedae-Uksae 1" which is high biomass yield and "mass propagation method of miscanthus" which can improve propagation efficiency in 2009. In order to develop "Korean miscanthus industry" in future, the superior varieties available not only domestic but also foreign market should be developed by new breeding method including molecular markers. Researches on production process of cellulosic bio-ethanol including pre-treatment and saccharification of miscanthus biomass also should be strengthen.

Influence of Mixtures and Curing Conditions on Strength and Microstructure of Reactive Powder Concrete Using Ternary Pozzolanic Materials (배합 및 양생조건이 3성분계 포졸란재를 이용한 RPC의 강도발현 특성에 미치는 영향)

  • Janchivdorj, Khulgadai;Choi, Seung-Hoon;So, Hyoung-Seok;Seo, Ki-Seog;So, Seung-Young
    • Journal of the Korea Concrete Institute
    • /
    • v.25 no.4
    • /
    • pp.457-465
    • /
    • 2013
  • This study discussed the influence of mixtures and curing conditions on the development of strength and microstructure of RPC using ternary pozzolanic materials. Through pilot experiment, various RPC was manufactured by adding single or mixed ternary pozzolanic materials such as silica fume, blast furnace slag and fly ash by mass of cement, up to 0~65%, and cured by using 4 types of method which are water and air-dried curing at $20^{\circ}C$, steam and hot-water curing at $90^{\circ}C$. The results show that the use of ternary pozzolanic materials and a suitable curing method are an effective method for improving development of strength and microstructure of RPC. The unit volume of cement was greatly reduced in RPC with ternary pozzolanic materials and unlike hydration reaction in cement, the pozzolanic reaction noticeably contributes to a reduction in hydration heat and dry shrinkage. A considerable improvement was found in the flexural strength of RPC using ternary pozzolanic materials, and then the utilization of a structural member subjected to bending was expected. The X-ray diffractometer (XRD) analysis and Scanning Electronic Microscope (SEM) revealed that the microstructure of RPC was denser by using the ternary pozzolanic materials than the original RPC containing silica fume only.

A Review on Major Factors for Microalgae Biofuel Commercialization (미세조류 바이오연료 상용화를 위한 주요 인자 연구)

  • Kang, Do-Hyung;Heo, Soo-Jin;Oh, Chulhong;Ju, Se-Jong;Jeon, Seon-Mi;Choi, Hyun-Woo;Noh, Jae Hoon;Park, Se Hun;Kim, Tae-Young
    • Ocean and Polar Research
    • /
    • v.34 no.4
    • /
    • pp.365-384
    • /
    • 2012
  • Microalgae are photosynthetic microorganisms that are highly productive in the presence of basic renewable natural sources (light, $CO_2$, water and nutrients). They can synthesize lipids, carbohydrates and proteins in a small number of days. Subsequently, these carbon-captured products can be processed into both biofuels and valuable co-products. Additionally, microalgae would be an ideal feedstock for replacing land-based food crops with cellular products as high energy density transportation fuels. These microscopic organisms could contribute a significant amount of renewable energy on a global scale. In Korea, microalgae biofuel research was common in the early 1990s. The research activities were unfortunately stopped due to limited governmental funds and low petroleum prices. Interest in algal biofuels in Korea has been growing recently due to an increased concern over oil prices, energy security, greenhouse gas emissions, and the potential for other biofuel feedstock to compete for limited agricultural resources. The high productivity of microalgae suggests that much of the Korean transportation fuel requirements can be met by biofuels at a production cost competitive with the increasing cost of petroleum seen in early 2008. At this time, the development of microlalgal biomass production technology remains in its infancy. This study reviewed microalgae culture systems and biomass production, harvesting, oil extraction, conversion, and technoeconomical bottlenecks. Many technical and economic barriers to using microalgal biofuels need to be overcome before mass production of microalgal-derived fuel substitutes is possible. However, serious efforts to overcome these barriers could become a large-scale commercial reality. Overall, this study provides a brief overview of the past few decades of global microalgal research.

Development of Geopolymer Mortar Based on Fly Ash (플라이애시 기반 지오폴리머 모르타르 개발)

  • Koh, Kyung-Taek;Ryu, Gum-Sung;Lee, Jang-Hwa
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.6 no.4
    • /
    • pp.119-126
    • /
    • 2012
  • Portland cement production-1.5billion tonnes yearly worldwide-contributes substantially to global atmospheric pollution(7% of total of $CO_2$ emissions). Attempts to increase the utilization of fly ash, by-products from thermal power plant to partially replace the cement in concrete are gathering momentum. But most of fly ash is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. Instead, the sources of material such as fly ash, that are rich in Silicon(Si) and Aluminium(Al), are activated by alkaline liquids to produce the binder. Hence concrete with no cement is effect reduction of $CO_2$ gas. In this study, we investigated the influence of the compressive strength of mortar on alkaline activator and curing condition in oder to develop cementless fly ash based alkali-activated concrete. In view of the results, we found out that it was possible for us to make alkali-activated mortar with 70MPa at the age of 28days by using alkaline activator manufactured as 1:1 the mass ratio of 9M NaOH and sodium silicate and applying the atmospheric curing after high temperature at $60^{\circ}C$ for 48hours.

  • PDF

Isolation and Identification of Adenosine and Phlomuroside from the Aerial Parts of Oryza sativa L. (벼(Oryza sativa L.)의 지상부로부터 adenosine과 phlomuroside의 분리 및 동정)

  • Jeong, Rak-Hun;Lee, Dae-Young;Cho, Jin-Gyeong;Baek, Yoon-Su;Seo, Kyeong-Hwa;Lee, Dong-Geol;Kang, Hee-Cheol;Kim, Ji-Young;Baek, Nam-In
    • Journal of Applied Biological Chemistry
    • /
    • v.57 no.4
    • /
    • pp.321-324
    • /
    • 2014
  • Fresh and chopped aerial parts of Oryza sativa were extracted in 80% aqueous mehthanol, and the concentrated extract was successively partitioned in n-hexane, ethyl acetate (EtOAc), n-butanol (n-BuOH), and $H_2O$ fractions. From the n-BuOH fraction, two compounds were isolated through repeated silica gel and ODS column chromatography (c.c.). Based on nuclear magnetic resonance (NMR), mass spectrometry and infrared spectroscopy spectroscopic data, the compounds were identified to be adenosine (1) and phlomuroside (2). Especially, the configuration of both the anomer hydroxyl groups was determined as ${\beta}$ from the coupling constants of the anomer protons (J =6.0 and 7.6 Hz) in the $^1H-NMR$ spectra. This is the first report for the isolation of these compounds from Oryza sativa L.

A Preliminary Study on the Feasibility of Copper Mesh as an Off-Gas Iodine Capturing Medium for Pyroprocessing (파이로프로세싱 배기체 요오드 포집을 위한 구리메쉬 적용 가능성에 대한 기초연구)

  • Jeon, Min Ku;Lee, Tae Kyo;Choi, Yong Taek;Eun, Hee-Chul;Choi, Jung Hoon;Park, Hwan-Seo;Hur, Jin-Mok;Ahn, Do-Hee
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.13 no.3
    • /
    • pp.235-242
    • /
    • 2015
  • A commercially available copper mesh was investigated as an iodine off-gas capturing medium for pyroprocessing, with an aim to replace costly silver based adsorbents. Theoretical calculation results suggested that the reaction between metallic copper and gaseous iodine will occur spontaneously to produce copper iodide in the temperature range of 100 ~ 500℃. The effect of the reaction temperature on iodine capturing efficiency was investigated by experimentation, and it was found that 5 and 6 wt% of iodine (initial mass 2.0 g) was captured by a single copper mesh (0.26 g) at 300 and 400℃, respectively. The repeated experimental results also suggested that copper utilization can be increased with the help of the spontaneous detachment of the reaction product (CuI) from a copper mesh. The formation of the CuI phase was confirmed using the X-ray diffraction technique, and the surface morphology of the reaction product was observed using scanning electron microscopy.

Properties of the Flowability and Strength of Cementless Alkali-Activated Mortar Using the Mixed Fly Ash and Ground Granulated Blast-Furnace Slag (플라이애쉬와 고로슬래그 미분말의 혼합 사용한 무시멘트 알칼리 활성 모르터의 유동성 및 강도 특성)

  • Koh, Kyung-Taek;Ryu, Gum-Sung;Lee, Jang-Hwa
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.4
    • /
    • pp.114-121
    • /
    • 2010
  • Portland cement production is under critical review due to high amount of CO2 gas released to the atmosphere. Attempts to increase the utilization of a by-products such as fly ash and ground granulated blast-furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. However, most study deal only with alkali-activated ground granulated blast furnace slag or fly ash, as for the combined use of the both, little information is reported. In this study, we investigated the influence of mixture ratio of fly ash/ blast furnace slag tand curing condition on the flowability and compressive strength of mortar in oder to develop cementless alkali-activated concrete. In view of the results, we found out that the mixture ratio of fly ash/blast furnace slag always results to be significant factors. But the influence of curing temperature in the strength development of mortar is lower than the contribution due to other factors. At the age of 28days, the mixture 50% fly ash and 50% ground granulated blast furnace slag activated with 1:1 the mass ratio of 9M NaOH and sodium silicate, develop compressive strength of about 65 MPa under $20^{\circ}C$ curing.

  • PDF

A Study on Improvement of Presidential Job Approval in the Poll Survey (대통령 국정수행 지지도 조사의 개선에 대한 연구)

  • Bae, Jong-Chan
    • Survey Research
    • /
    • v.13 no.1
    • /
    • pp.113-134
    • /
    • 2012
  • It is very vital for the presidential preference not only to be a political achievement of the president himself, but also to be an influential base of people-related policy and its implementation. The purpose of this study is to provide the newly developing ideas to compose an appropriate question and to point out the present problems in the utilization of survey results. At first, it turned out to be inappropriate to make a question for evaluation of presidential job approval in the perspective of questionnaire planning. As the respondents were not informed of what the president did, so they were more likely not to know whether the president did well or not. Secondly, the correlation analysis has been made between the evaluation question of the presidential job approval and policy-related questions including the direct one for the presidential preference in the aspect of statistical analysis. Through this process, evaluation of the presidential job approval is not accountable and the direct question for the presidential preference is at best explainable. In conclusion, it seems more persuasive to compare the statistical outcome of the presidential preference which has been derived of to the high rating what the respondents think comprehensively not depending on a subjective decision by mass media.

  • PDF