• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4068-4076
• /
• 2024

In the event of severe accidents in pressurized water reactor (PWR) nuclear power plants, the potential leakage of radioactive aerosols through containment cracks poses a considerable radioactive hazard to the public. Understanding aerosol transport and retention in cracks helps reduce the conservatism and uncertainty of radioactive hazard assessment. Concrete cracks are recognized as a pivotal pathway for the leakage of radioactive aerosols, and several researchers have undertaken experimental investigations concerning the aerosol transport and retention in concrete cracks. However, the majority of these studies have rather low gas flow Reynolds numbers. In this work, an experimental setup is built to study aerosol transport and retention in concrete cracks under high Reynolds number flow. The TiO₂ aerosol with a mass median diameter of 1 ㎛ and two concrete crack specimens are used in experiments. The results of gas flow experiments indicate that the Reynolds number is capable of reaching 10547. Combining the flow experimental data and Suzuki's formula, the equivalent heights of these two crack specimens are approximated as 303.67 ㎛ and 231.48 ㎛. The experimental results indicate a notably high retention rate of aerosols, exceeding 0.8. Furthermore, under high Reynolds number flow, the retention rate varies over a relatively narrow range, with the larger the equivalent height of the crack resulting in a lower retention rate. The experimental results match well with the mechanistic analysis based on inertial deposition theory, demonstrating the rationality of the inertial deposition theory.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.93-102
• /
• 2006

Control input's saturation of active control devices for large structures under large external disturbances are often occurred. It is more difficult to obtain the exact values of mass and stiffness as structures are higher. The modelling errors between mathematical models and real structures must be also included as parameter uncertainties. Therefore, in active vibration control of civil engineering structures like buildings and bridges, the robust saturation controller design method considering both control input's saturation and parameter uncertainties of system is needed. In this paper, stabilities of linear optimal controller LQR, modified bang-bang controller, saturated sliding mode controller, and robust saturation controller among various controllers which have been studied and applied to active vibration control of buildings are investigated. Especially, unstable phenomena of the LQR, the modified bang-bang controller and the saturated sliding mode controller when the control input is saturated or parameter uncertainties exist are presented to show the necessity of the robust saturation controller. The robust stability of the robust saturation controller are shown through a numerical example of a 2DOF linear vibrating system and an experimental test of the two-story structure with an active mass damper (AMD).

• Journal of the Korean Society of Food Culture
• /
• v.13 no.4
• /
• pp.275-291
• /
• 1998

Food irradiation is an emerging technology which offers many advantages such as reduction of microorganisms, extension of shelf-life of foods, reduction in the use of post-harvest chemicals, and destruction of insects and parasites. The commercial utilization of food irradiation, however, has been restricted because of the uncertainty of consumers' responses to it. Because success of food irradiation in the marketplace will depend upon their acceptability by consumers, this study focused on the consumers' perception and acceptance toward food irradiation in order to get basic data for commercial utilization of food irradiation and give information to consumers to help rational consumption behavior. The survey with 411 respondents living in Youngnam area was conducted during the spring of 1997 by the questionnaires. The results and implications from this study are as follows. First, consumers' knowledge about food irradiation is scanty. Two-thirds of respondents in the survey had not heard of irradiated foods and many people confused irradiation with radioactivity. In the willingness to accept food irradiation, one-third of respondents showed a wait-and-see attitude. This result indicated consumers had insufficient information about the irradiation process and nationwide education of food irradiation technology should be undertaken. Second, although the purchase and use of food are very important consumption behaviors, consumer education by mass communication has been rarely done. For the successful commercialization of food irradiation, the information provision by mass communication for the consumers should be made. Third, consumers generally worried about residual pesticide and intended to purchase irradiated foods if radioactivity was not retained in the foods. Therefore, food irradiation could be an alternative method to the use of pesticide Fourth, consumers pointed out that they wanted to extend shelf-life of milk and dairy foods, fish and seafood and to irradiate these foods. Therefore, research for the safety of irradiated foods should be continually conducted. finally, labeling for irradiated foods is needed to provide the information and to further increase public understanding. Especially, the labeling should show the definite reason why irradiation is being used. In conclusion, recently, under the circumstances that the commercial utilization of food irradiation and irradiation for the import and export products have been increased in many countries, many efforts are needed to improve the quality of irradiated foods, and prove the safety of them in Korea. In addition, consumer education for food irradiation should be given to help consumers to make decision for food purchase and use.

• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.264-274
• /
• 2005

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost which is generally estimated according to rock fragmentation. Therefore it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground levels is provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.271-277
• /
• 2005

Urea in blood has been measured as an effective marker for diagnosis of renal function. Urea which is e end-product of nitrogen containing metabolites such as proteins is filtered through glomeruli of kidneys and then excreted as urine. If the renal function is deteriorated, the urea concentration in blood will be increased, from which the healthiness of renal function is judged. In order to improve the confidence of diagnosis results, the results must keep traceability chain to certified reference materials, which was certified by primary reference method. In this study, we proposed isotope dilution-liquid chromatography/mass spectrometry (ID-LC/MS) as a candidate primary method, in which $15^N_2$-urea is used as an internal reference material. The developed method is highly accurate in principle and is convenient as it does not require cumbersome derivatization. 0.1 mmol/L ammonium chloride was selected as a mobile phase for HPLC because it provided low interference in MS analysis of relatively low molecular weighted urea. HPLC and MS were connected with an electrospray ionization (ESI) interface of positive mode, which provided high sensitivity and reproducibility. The developed method was validated with internationally recognized reference materials, and we have obtained satisfactory results in an international ring trial. The expanded uncertainty calculated according to ISO guide was 1.8% at 95% confidence interval. The developed method is being used as a primary reference measurement method such as for certification of serum certified reference materials (CRMs).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.107-112
• /
• 2018

The purpose of this study was to investigate the migration levels of lead (Pb), cadmium (Cd) and arsenic (As) from polycarbonate food contact materials into food simulant at different temperatures ($70^{\circ}C$ and $100^{\circ}C$). The method was validated by linearity of calibration curves, limit of detection (LOD), limit of quantification (LOQ), recovery, precision and uncertainty. All of 200 samples, including bottles, cups, containers, ladles, spoons and tongs were purchased from domestic markets and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Mean concentrations of positive samples were higher at $100^{\circ}C$ than $70^{\circ}C$ as showing a dependency of migration temperature. The migration concentrations ranged from not-detected (ND) to $4.67{\mu}g/L$, ND to $0.49{\mu}g/L$L and ND to $2.91{\mu}g/L$ for Pb, Cd and As, respectively, which were far below the migration limits of Korea standards and specifications for food utensils, containers and packages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.76-84
• /
• 2021

The quality assurance activities can detect the factors that affect the quality based on risk identification in the course of mass production. Risk identification is conducted with risk analysis, and the risk analysis method for the rotorcraft landing system is selected by failure mode effects analysis (FMEA). FMEA is a method that detects the factors that can affect the product quality by combining severity, occurrence, and detectability. The results of FMEA were prioritized using the risk priority number. On the other hand, these methods have certain shortcomings because the severity, occurrence, detectability are weighted equally. Dempster-Shafer evidence theory can conduct uncertainty analysis for the opinions with personal reflections and subjectivity. Based on the theory, the belief function and the plausibility function can be formed. Moreover, the functions can be utilized to evaluate the belief rate and credibility. The system is exposed to impact during take-off and landing. Therefore, experts should manage failure modes in the course of mass production. In this paper, FMEA based on the Dempster-Shafer evidence theory is discussed to perform risk analysis regarding the failure mode of the rotorcraft landing system. The failure priority was evaluated depending on the factor values. The results were derived using belief and plausibility function graphs.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.316-325
• /
• 2008

An inductively coupled plasma mass spectrometry (ICP-MS) instrument equipped with flow injection-hydride generation system was used for the determination of trace arsenic in seawater sample. The accuracy in this method was verified by the analysis of certified reference materials (CRM) of seawater (CASS-4, NASS-5). The analytical results agreed with certified value within the range of uncertainty. The expanded uncertainties for CASS-4 and NASS-5 in this experiment were ranged from 6.2% to 6.8% obtained from repeated analyses of the CRMs (n=5). The detection limit of $As^+$ (m/z=74.9216) in this method was confirmed about 0.01 ug/kg. Linearity obtained from calibration curve of arsenic was excellent ($R^2=1$). The detection at $As^+$ (m/z=74.9216) and $AsO^+$ (m/z=90.9165) by using oxygen reaction gas in DRC mode was compared. Sensitivity at $AsO^+$ (m/z=90.9165) was decreased about 25-fold, but the analytical results are the same that at $As^+$ (m/z=74.9216).

• Journal of Consumption Culture
• /
• v.15 no.2
• /
• pp.143-169
• /
• 2012

Consumption is the most important cultural keyword in the modern society. This study tried an exploratory comparison of consumer culture of Korea, USA and Sweden in response to the needs on cultural comparison research perspective. Triandis's cultural dimensions were adopted to explore each country's cultural characteristics. A qualitative in-depth interviews were conducted to consumers who lived both in Korea and USA, or in Korea and Sweden, which enabled them to get familiar with each country's consumer culture. The research found that the culture is projected to the consumer culture in a micro domain. The individualism allowed consumers in USA and Sweden to be unconscious of other's eyes. But collectivism in Korea made Korean consumers locked in other's judgement. In contrast, in a macro domain of consumer culture such as donation and pro-environmental consumption, consumption practices were in a dissonance with their cultural orientation, where includes interaction with society and environment. In addition, in a post-materialistic society, symbolism of consumption goods gets weakened and experiential consumption evolves with a transition from mass consumption society to plural culture society. Lastly, consumer culture functions as a creative mechanism of new culture by consumer's reflexive planning, which is one of the clues of an autonomous consumer culture. This study tried to explore the consumer culture of Korea, USA and Sweden as an exploratory trial for the comparison of consumer cultures. To increase empirical consumer culture study, refined questionnaire item pool is to be extracted through various exploratory researches, which can be utilized commonly in various cultures. Moreover, an additional research is in need about a consumer culture in a macro domain and experiential consumer culture in a post-materialism society.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.47-58
• /
• 2015

Purpose - This study aims to seek determinants of department store sales commission rates under consignment contracts based on transaction cost theory, the power-dependence view, and the resource-based view. A consignment contract is a unique contract where the retailer, over a given period, takes possession of goods owned by a supplier, promotes the sales of these goods, and receives a profit share from their sales. Under this contract, the supplier owns the goods until they are sold. In department stores in South Korea, over 70% of overall sales comes through consignment contracts. In other words, this is the most popular contract agreement between large retailers and vendors in South Korea. Consignment contracts yield high profits to department stores with minimal sales uncertainty, stock cost, and marketing investment. Many suppliers believe the consignment contract commission rates are too high. However, department stores disagree. They state that the commissions are not high as they generate new value for the suppliers by accumulating up-to-date merchandise and supporting various marketing programs on their behalf. Recently, consignment contracts have been critically examined and scrutinized by politicians, mass media, and the public of Korea. This study further intends to derive implications reflecting both buyer and seller perspectives as well as offer insights to policy makers in making appropriate decisions. Research design, data, and methodology - To verify the proposed research model and test hypotheses, the authors selected 164 suppliers, which currently have relationships with department stores. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. The data were analyzed using SPSS 18.0 and AMOS structural equation modeling program Results - For the transaction cost theory and the power-dependence view, the results indicated that product diversity and demand volatility had a positive impact on the sales dependence on a department store. Dependence in turn had a positive effect on the sales commission under the consignment contract. Based on the resource-based view, the department store's marketing capability, the supplier's perception toward merchandising, and supporting activities could enhance the department store's channel leadership in the buyer-seller relationship. Subsequently, the channel leadership had a positive effect on the sales commission. However, product complexity had no relationship with department store dependence. Conclusions - This is the first empirical research that investigates the determinants of sales commissions under consignment contracts in the domestic retail industry. This study reveals several theoretical and practical implications for both marketing scholars and marketers. In terms of theoretical implication, this study integrated and enlarged certain theoretical background, such as transaction cost theory, the power-dependence view, and the resource-based view, to explain the determinants of sales commissions under consignment contracts that include sales revenue. From a business management viewpoint, this research offers useful insights for policy makers by applying two different perspectives, both the manufacturer and the retailer, in terms of the sales commission issue under a consignment contract.