• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.59-71
• /
• 2021

Hybrid hydrothermal carbonization (Hybrid HTC) technology is a proprietary thermochemical process for two or more organic wastes.The reaction time is less than two hours with temperature range 180~250℃ and pressure range 20~40bar. Thanks to accumulation of the carbon of the waste during Hybrid HTC process, the energy value of the solid fuel increases significantly with comparatively low energy consumption. It has also a great volume reduction with odor removal effect so that it is evaluated as the best solid fuel conversion technology for various organic wastes. In this study of the hybrid hydrothermal carbonization, the effect on the calorific value and yield of Cambodian mango waste were evaluated according to changes in temperature and reaction time. Through the study, parameter optimization has been sought with improving energy efficiency of the whole plant. It is decomposed in the Hydro-Carbonation Technology to Generate Gas. At this time, it is possible to develop manufacturing and production technologies such as hydrogen (H₂) and methane (CH₄). Based on the results of the study, a pilot plant (2t/day) has been proposed for future commercialization purpose along cost analysis, mass balance and energy balance calculations.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.2
• /
• pp.81-90
• /
• 2021

PURPOSE: Aging causes a decrease in muscle mass and a change in posture, which reduces motor function and makes it difficult to perform daily activities independently. As these factors are closely related to the deterioration of the quality of life, it is very important to prevent and manage negative changes in the musculoskeletal system. Forest healing is a nature therapy course that maintains and promotes health using various environmental factors in a forest. The purpose of this study was to identify the effects of the forest healing anti-aging programs on the physical health of the elderly. METHODS: Ten elderly people participated in this study, as part of a forest healing anti-aging program for two days. Functional fitness, muscle strength, gait function, and balance were evaluated before and after the program. RESULTS: The number of arm curls, chair stands, and steps in a 2-min walk significantly increased (p < .05). 8-feet up & go time was significantly decreased (p < .05). Biceps brachii, quadriceps femoris, and calf muscle strength were significantly increased (p < .05). Gait velocity and cadence were significantly increased (p < .05). Step length, stride length, step time, swing time, stance time, and cycle time were significantly decreased (p < .05). Reaching distance in the lateral directions was significantly increased (p < .05). CONCLUSION: The forest healing anti-aging program improves the physical health of the elderly.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.671-676
• /
• 2021

A cDNA encoding the protein lethal (2) essential for life [l(2)efl] was cloned from Gryllus bimaculatus and named GBl(2)efl. This protein is composed of 189 amino acids, including an N-glycosylation site and 15 phosphorylation sites. Its predicted molecular mass is 21.19 kDa, with a theoretical isoelectric point of 6.2. The secondary structure of GBl(2)efl was predicted from the identification of random coils (56.08%), alpha helices (22.22%), extended strands (17.99%), and beta turns (3.7%) through sequence analyses. A homology analysis revealed that GBl(2)efl exhibited a high similarity with other species at the amino acid level, ranging from 52% to 69%. While GBl(2)efl mRNA expression was higher in the dorsal longitudinal flight muscle following a three-day starvation and in the Malpighian tubules following a one-day starvation, no changes in expression were detected in other tissues. Furthermore, tunicamycin-induced endoplasmic reticulum (ER) stress resulted in an approximately 1.8-fold higher expression in the fat body compared with the wild type.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.223-231
• /
• 2022

Covid-19, which has made a huge difference in our daily lives, has also brought major changes to our college education. As the class was changed from the traditional face-to-face class to a non face-to-face class, both teachers and students had difficulties in adapting, and problems such as the occurrence of academic achievement gaps due to non face-to-face classes were also raised. Therefore, this study aims to find out what attitudes students have toward non-face-to-face classes at universities caused by Covid-19. Accordingly, this study tried to identify the types of subjective perceptions college students have toward non-face-to-face classes by applying the Q methodology, and to suggest points for reference in the development and improvement of non-face-to-face classes in the future. Five types were found as a result of analysis using 30 P samples and 34 Q samples. First, learning efficiency-oriented type, second, class participation and communication-oriented type, third, non-face-to-face class active acceptance and utilization type, fourth, dissatisfaction type due to remote system and equipment operation errors, fifth, passive response type according to the situation to be. From the results of this study, it seems that it is necessary to develop an educational method for effective non-face-to-face class considering the characteristics of each type, and the merits of non-face-to-face classes, especially recorded lectures, in terms of learning efficiency, are evident. Therefore, even if face-to-face classes are conducted entirely at universities, it is believed that providing video-recorded lectures in class will be of great help to students' learning.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.435-444
• /
• 2023

Suitable environmental conditions in Saemangeum frequently favor phytoplankton growth. There have been occurrences of sudden phytoplankton blooms, surpassing the algae management standards. A model was designed to prevent such blooms using scientific predictive techniques to forecast and regulate the possibility of phytoplankton blooms. We propose effective and efficient algae control measures concerning every phytoplankton species optimized through the policy control of nutrients (DIN, PO4-P) from rivers and controlling lake salinity using gate operations. The probability of phytoplankton blooms was initially forecast using an artificial neural network algorithm based on observations. The model's Kappa number fluctuated from 0.7889 to 1.0000, indicating good to excellent predictive power. The Garson algorithm was then utilized to assess the significance of explanatory variables for every species. Meanwhile, the probability of phytoplankton blooms was anticipated depending on the DIN and salinity value changes. Therefore, the model predicted the precise DIN and salinity concentrations to inhibit phytoplankton blooms for each species. Hence, the green algae model can create effective proactive measures to avoid future phytoplankton blooms in enormous artificial lakes.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.241-256
• /
• 2023

BACKGROUND/OBJECTIVES: Diabetes-specific oral nutritional supplements (ONS) have anti-hyperglycemic effects, while D-allulose exerts anti-diabetic and anti-obesity effects. In this study, we investigated the efficacy and safety of diabetes-specific ONS, including allulose, on glycemic and weight changes in overweight or obese patients with type 2 diabetes mellitus (T2DM). SUBJECTS/METHODS: A single-arm, historical-control pilot clinical trial was conducted on 26 overweight or obese patients with T2DM (age range: 30-70 yrs). The participants were administered 2 packs of diabetes-specific ONS, including allulose (200 kcal/200 mL), every morning for 8 weeks. The glycemic profiles, obesity-related parameters, and lipid profiles were assessed to evaluate the efficacy of ONS. RESULTS: After 8 weeks, fasting blood glucose (FBG) level significantly decreased from 139.00 ± 29.66 mg/dL to 126.08 ± 32.00 mg/dL (P = 0.007) and glycosylated hemoglobin (HbA1c) improved (7.23 ± 0.82% vs. 7.03 ± 0.69%, P = 0.041). Moreover, the fasting insulin (δ: -1.81 ± 3.61 μU/mL, P = 0.017) and homeostasis model assessment for insulin resistance (HOMA-IR) (δ: -0.87 ± 1.57, P = 0.009) levels decreased at 8 weeks, and body weight significantly decreased from 67.20 ± 8.29 kg to 66.43 ± 8.12 kg (P = 0.008). Body mass index (BMI) also decreased in accordance with this (from 25.59 ± 1.82 kg/m² to 25.30 ± 1.86 kg/m², P = 0.009), as did waist circumference (δ: -1.31 ± 2.04 cm, P = 0.003). CONCLUSIONS: The consumption of diabetes-specific ONS with allulose in overweight or obese patients with T2DM improved glycemic profiles, such as FBG, HbA1c, and HOMA-IR, and reduced body weight and BMI.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.72-81
• /
• 2022

As new disasters such as COVID-19, MERS, and earthquakes appear in modern society, the nation's ability to manage uncertain risks is becoming more important. The government is promoting a disaster safety management policy closely related to daily life by reinforcing on-site response capabilities. Therefore, in order to respond more effectively to disasters that have recently been enlarged, complicated, and delocalized, there is a limit to only disaster-related organizations in the public sector. It is necessary to check it and find ways to develop it. In the event of an unpredictable national disaster or infection, the government needs disaster safety management measures closely related to daily life. Accordingly, as an efficient response and strategy such as procedures and methods for funeral support at the scene of a national disaster were needed, a designated funeral home was introduced. In the event of a major disaster, a large number of casualties that exceed the daily work level of the relevant department occur and rapid changes in relief, medical care, funeral and administrative procedures occur accordingly. The purpose of this study is to derive basic operating directions and prompt funeral support plans for funeral homes designated for national disaster preparedness.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.158-175
• /
• 2022

This study discusses mass unemployment and job insecurity due to the 4th industrial revolution and technological progress. In particular, the construction automation service method can contribute to increasing work productivity, preventing on-site safety accidents, and enhancing the competitiveness of the construction industry according to rapid development and convergence between technologies. However, there is great concern that the position of workers will decrease and the income distribution will deteriorate. Therefore, this study is necessary to alleviate the anxiety of the labor market and to find a direction for the government and all walks of life to ponder. To carry out this study, in-depth interviews were conducted with two experts currently engaged in the construction field, and through analysis, we intend to derive meaning and identify current trends, identify necessary improvement measures and institutional areas and suggest research directions. As a result of the analysis, it is possible to suggest a response strategy in a total of three themes: purpose, implication, and strategy. Based on this, there are response strategies in four areas: (1) industrial site response, (2) worker response, (3) education, and (4) training response, and government and corporate response. Through this study, it is necessary to revitalize economic and sociological discussions in the future so that the improvement in productivity and efficiency of society as a whole due to technological innovation of construction automation services does not lead to social problems such as an increase in the unemployment rate and a decrease in jobs in the labor market.