• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1117-1128
• /
• 2021

The purpose of the current study was to investigate the effects of 4-week health promotion intervention program consisting of high-intensity aerobic exercise to improve energy consumption and cardiorespiratory capacity, circuit training to strengthen muscular strength and endurance and education for lifestyle changes on the obesity level, physical fitness, insulin resistance and metabolic syndrome among overweight or obese elementary school students. Twenty three overweight or obese children as obese group and 15 normal body weight children as normal group were recruited. The health promotion program consisted of two exercise sessions and one education session, 3days/week in 4-week. Obesity level(body mass index, waist circumference, %body fat), physical fitness(muscular strength, muscular endurance, flexibility, cardiopulmonary fitness), insulin resistance(homeostasis model assessment of insulin resistance) and metabolic syndrome risk factors(blood pressure, fasting glucose, triglycerides, high density lipoprotein cholesterol) were measured. There was not significant decrease in obesity level; however, there were significant improvement in physical fitness, insulin resistance and metabolic syndrome risk factors after program participation among obese children. As a result, through participation in the summer camp consisting mainly of exercise, the improvement of the physical fitness level and the decrease of insulin resistance had an effect on the reduction of the metabolic syndrome frequency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.293-300
• /
• 2021

In this study, the microstructure and thermal conductivity correlation was investigated for concrete materials used in concrete thermal energy storage (CTES) among real-time energy storage devices. Graphite was used as admixture to increase the thermal conductivity performance of the CTES. Concrete specimens of 10% and 15% substitution of cement by mass with graphite, as well as ordinary portland cement (OPC) specimens were prepared, and the microstructural changes and effects on thermal conductivity were analyzed. Porosities of OPC and concrete with graphite were compared using micro-CT, and the microstructural characteristics were quantified using probability functions. Three-dimensional virtual specimens were constructed for thermal analysis, to confirm the effect of microstructural characteristics on thermal conductivity, and the results were compared with the measured conductivity obtained using the hot-disc method. To identify thermal conductivity of graphite for thermal analysis, solid phase conductivity was inversely determined based on simulation and experimental results, and the effect of graphite on thermal conductivity was analyzed.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.35 no.2
• /
• pp.71-80
• /
• 2021

Parkinson's disease is one of the typical neurodegenerative disease and it is caused by the destruction of substantia nigra in brain leading to lack of dopamine secretion, and it presents 4 major motor symptoms such as tremor, bradykinesia, stiffness, postural instability. Furthermore, it causes many non-motor symptoms such as anosmia, REM sleep conduct disorder, orthostatic hypotension, dementia and autonomic ataxia such as lack of adjusting blood pressure, hyperhydrosis, constipation. Dopaminergic therapy is the most commonly used strategy, but long term treatment of levodopa induce various adverse effects. Thus, many people are focusing on new therapies other than established therapies, and there are many tries and approaches with paradigm shift. Our medical team was able to get 4 cases of PD patients who are hospitalized in our hospital, treated by Whole Body Gi-Hyeol Therapy consisting of acupuncture therapy, herbal therapy, and mental therapy, and their conditions improved in perspective of Unified Parkinson's Disease Rating Scale(UPDRS), Heart Rate Variability(HRV), and Quality of life. Among all 4 cases, UPDRS score and quality of life score is gotton better, and among 2 cases SDNN, RMS-SD, TP, LF, HF scores are finely increased. And PDQ-39 score which shows quality of life is also improved. However, in spite of these improvements and positive results, there were no meaningful improvement in a hurt from a fall which is important to the aged, muscular atrophy which causes bone fracture and SMI(Skeletal Muscle Mass Index) which is indicator of osteoporosis. Thus, supplementary treatment about Whole Body Gi-Hyeol Therapy such as more active nutrition intervention, safe and effective kinesitherapy is needed, and from now on continuous case reports and systematic clinical research which has control group must be carried out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.319-325
• /
• 2018

The use of 3D printing (Additive Manufacturing) technology has expanded from initial model production to the mass production of parts in the industrial field based on the continuous research and development of materials and process technology. As a representative polymer material for 3D printing, the polyamide-based material, which is one of the high-strength engineering plastics, is used mainly for manufacturing parts for automobiles because of its light weight and durability. In this study, the specimens were fabricated using Selective Laser Sintering, which has excellent mechanical properties, and the flexural characteristics were analyzed according to the temperature of the two types of polyamide 12 and glass bead reinforced PA12 materials. The test specimens were prepared in the directions of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ based on the work platform, and then subjected to a flexural test in three test temperature environments of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, PA12 had the maximum flexural strength in the direction of $90^{\circ}$ at $-25^{\circ}C$ and $0^{\circ}$ at $25^{\circ}C$ and $60^{\circ}C$. The glass bead-reinforced PA12 exhibited maximum flexural strength values at all test temperatures in the $0^{\circ}$ fabrication direction. The tendency of the flexural strength changes of the two materials was different due to the influence of the plane direction of the lamination layer depending on the type of stress generated in the bending test.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.22 no.4
• /
• pp.303-329
• /
• 2019

Intestinal failure (IF) is the critical reduction of the gut mass or its function below the minimum needed to absorb nutrients and fluids required for adequate growth in children. Severe IF requires parenteral nutrition (PN). Pediatric IF is most commonly due to congenital or neonatal intestinal diseases or malformations divided into 3 groups: 1) reduced intestinal length and consequently reduced absorptive surface, such as in short bowel syndrome (SBS) or extensive aganglionosis; 2) abnormal development of the intestinal mucosa such as congenital diseases of enterocyte development; 3) extensive motility dysfunction such as chronic intestinal pseudo-obstruction syndromes. The leading cause of IF in childhood is the SBS. In clinical practice the degree of IF may be indirectly measured by the level of PN required for normal or catch up growth. Other indicators such as serum citrulline have not proven to be highly reliable prognostic factors in children. The last decades have allowed the development of highly sophisticated nutrient solutions consisting of optimal combinations of macronutrients and micronutrients as well as guidelines, promoting PN as a safe and efficient feeding technique. However, IF that requires long-term PN may be associated with various complications including infections, growth failure, metabolic disorders, and bone disease. IF Associated Liver Disease may be a limiting factor. However, changes in the global management of IF pediatric patients, especially since the setup of intestinal rehabilitation centres did change the prognosis thus limiting "nutritional failure" which is considered as a major indication for intestinal transplantation (ITx) or combined liver-ITx.

• Clean Technology
• /
• v.25 no.1
• /
• pp.63-73
• /
• 2019

Numerical analysis was done to evaluate the chemical reaction and the reduction rate inside of selective non-catalytic reduction to denitrification in combustion process. The $NO_X$ reduction in selective non-catalytic reduction is converted to not only nitrogen but also nitrous oxide. Simultaneous $NO_X$ reduction and nitrous oxide generation suppressing is required in selective non-catalytic reduction because nitrous oxide influences the global warming as a greenhouse gas. The current study was performed compare the computational analysis in the same temperature and amount of NaOH, and in comparison with the previous research experiments and confirmed the reliability of the computational fluid dynamics. Additionally, controlling the addition amount of NaOH to predict the $NO_X$ reduction efficiency and nitrous oxide production. Numerical analysis was done to check the mass fraction of each material in the measurement point at the end of selective non-catalytic reduction. Experimental Value and simulation value by numerical analysis showed an error of up to 18.9% was confirmed that a generally well predicted. and it was confirmed that the widened temperature range of more than 70% $NO_X$ removal rate is increased when the addition amount of NaOH. So, large and frequent changes of the reaction temperature waste incineration facilities are expected to be effective.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.366-375
• /
• 2018

Evapotranspiration (ET) information is needed for many applications in agricultural and environmental resource management because crop yields, plant growth and physiological characteristics are primarily water limited. This study was conducted to evaluate the diurnal change of ET using electronic weighing lysimeter and to determine whether the ET of Cnidium officinale Makino could be manipulated through meteorological factors such as solar radiation, windy conditions and air temperature etc., Pot has a diameter of 35 cm and an height of 38 cm. A disturbed soil of sandy loam (coarse, mixed, mesic family of Dystric Fluventic Eutroudepts) within lysimeter has a mass of approximately 40.0 kg. In 2017, 10-minute recordings of data were used for measuring actual ET, and also evaluating a relationship between ET and meteorological factors during from 2 Aug. to 6 Aug. The maximum daily ET of Cnidium officinale was $44.04{\pm}3.949g$ per hour in lysimetric measurements. Diurnal changes of ET was highly correlated with solar radiation ($r^2=0.7778$) and followed by wind speed ($r^2=0.6400$). But on the other hand, air temperature was not consistent with ET ($r^2=0.2260$). This results imply that ET of Cnidium officinaele seems to be mainly governed by radiation energy in clear days, and approximately 40% of solar radiation is likely to be converted into ET. Therefore, weighing lysimeter can be used to accurately estimate actual ET and is expected to attract a great deal of attention to reliable application of water management in agriculture.

• Journal of Applied Biological Chemistry
• /
• v.61 no.4
• /
• pp.397-403
• /
• 2018

The leaves of Spiraea prunifolia were extracted with 80% aqueous MeOH and the concentrates were partitioned into EtOAc, n-BuOH, and $H_2O$ fractions. The repeated $SiO_2$ or ODS column, and medium pressure liquid chromatographies for the n-BuOH fraction led to isolation of two phenolic glucosides. The chemical structures of these compounds were determined as isosalicin (1) and crenatin (2) based on spectroscopic analyses including Nuclear magnetic resonance and MS. Extracts were analyzed using UPLC-MS/MS providing a short analysis time within 5 min using MRM technique. The concentration of crenatin was higher as 9.53 mg/g and isosalicin was lower as 0.65 mg/g. Neuroprotective effects of these compounds against hydrogen peroxide ($H_2O_2$)-induced neurotoxicity were evaluated. The results showed that exposure to $H_2O_2$ induced morphological changes, cell death and neurotoxicity in SK-N-MC cells. However, pretreatment with crenatin resulted in inhibition of morphological change, reduction of loss of cell viability and attenuation of neuronal damage. These results suggested that neuroprotective effect of crenatin isolated from S. prunifolia can be a good candidate for the development of health beneficial foods which can ameliorate the degenerative neuronal disease caused by oxidative stress.

• Journal of Veterinary Clinics
• /
• v.36 no.1
• /
• pp.46-52
• /
• 2019

Pimobendan has inotropic and vasodilating effects on cardiovascular system, and pentoxifylline is known to decrease blood viscosity and improve blood flow to the heart. This study investigated the pharmacokinetics and pharmacodynamics following oral administration of pimobendan-pentoxifylline powder mixture in dogs. Eight healthy dogs were included and were divided into control (n = 4) and experimental (n = 4) groups. Vehicle powder and pimobendan-pentoxifylline powder mixture (pimobendane 0.25 mg/kg, pentoxifylline 15 mg/kg) were administrated orally to control and experimental groups, respectively. Plasma samples and measurement of echocardiographic indices were obtained for 24 hours following administration. Pimobendan and pentoxifylline concentrations were investigated using liquid chromatography-mass spectrometer (LC-MS) assay. The elimination half-life ($T_{1/2}$) were $2.65{\pm}1.42hours$ for pimobendan and $0.29{\pm}0.23hours$ for pentoxifylline. The time to reach maximum concentration ($T_{max}$) were $1.08{\pm}0.72hours$ for pimobendan and $0.29{\pm}0.14hours$ for pentoxifylline. The maximum blood concentration ($C_{max}$) were $2.83{\pm}1.50ng/mL$ for pimobendan and $1184.33{\pm}932.37ng/mL$ for pentoxifylline. Among echocardiographic indices, fractional shortening (FS), left ventricular internal diameter at end systole (LVIDs), and pre-ejection period (PEP) showed significant changes at 1-4 hours after the administration of pimobendan-pentoxifylline powder mixture. No adverse effects were observed during the investigation. This study demonstrates that pimobendan-pentoxifylline powder mixture can be used to control cardiovascular diseases in dogs.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.123-136
• /
• 2019

This study examines the effect of collector well installed to reduce groundwater level in the regions with the occurrence of landcreep, a soil mass movement triggered by instability on slopes. Slopes are prone to failure as a result of instability caused by its internal, topographic and geological properties as well as due to external factors such as rainfall and earthquake. In Korea during the rain season, rainfall infiltration affects the groundwater level in soil, building up porewater pressure and load, and finally drives slopes to collapse. Slope failure caused by rainfall infiltration has been leading to a drastic forest degradation. The studied slope is located adjacent to a valley, its terrain corresponds to piedmont gentle slope, while the upper part of the failure surface is steep. After reinforcing the terrain where landcreep had occurred and installing collector well on the slope, we measured the changes in the groundwater level. In order to analyze the relationship between the well and the slope, we calculated the ratio of groundwater level to rainfall before and after the installation of the collector well. As a result, it is confirmed that the ratio increases after the installation of the well, which in turn reduces the groundwater level. Analysis of the change in groundwater level after 3, 7, 15 days antecedent rainfall showed that the higher the overall groundwater level, the less the value ($r_p$) of groundwater level-rainfall ratio is, while the value becomes relatively greater when the groundwater level is low. In particular, if a slope has a large catchment basin as is in the case of the studied site, antecedent rainfall affects groundwater level in the order of 3 < 7 < 15 days.