• Biomedical Science Letters
• /
• v.17 no.2
• /
• pp.141-149
• /
• 2011

The purpose of this study was to find out any difference and correlation between the cardiac structure and its function according to the level of obesity as evaluated by waist measurement and BMI (body mass index) in healthy adults. For research subjects, the study selected a final 519 subjects excluding 198 subjects aged 55 or over out of 717 subjects who received echocardiography through a medical checkup at J General Hospital. For the criteria for obesity, men were defined as being obese in case their waist measurement was over 90 cm, whereas women were defined as being obese in case their waist measurement was over 80 cm. Also, regarding the BMI criteria, in case a person's BMI was 30 kg/$m^2$, the subject was classified as belonging to an obese group, and in case a person's BMI was between 25 kg/$m^2$ and 30 kg/$m^2$, the subject was classified as belonging to an overweight group. Concerning the evaluation of cardiac structure and function, they were evaluated using two-dimensional, M-mode, doppler echocardiography. According to the stage of obesity in accordance with waist measurement and BMI, the cardiac structure showed both eccentric and centripetal changes, and the cardiac function was also discovered to show differences according to the stage of obesity. In addition, also in the overweight group, which is a prior stage to obesity, out of the criteria for obesity classification according to BMI, there were differences in the cardiac structure and function. Also, both the waist measurement and BMI were found to have a correlation with cardiac structure and diastolic function. Consequently, cardiac structure and function are correlated with BMI and waist measurement, which are anthropometrical variables, and obesity is assumed to induce not only structural change but also functional change of the heart.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.23-44
• /
• 1994

The purpose of this study was to clarify the cultural characteristic of dress and adornments by examining articles on dress adornments and related items in Korean newspaper over periods historically and objectively by means of content analysis. This study attempted to at-tain a macro-cultural view by analysing to at-tain a macro-cultural view by analysing closely the cultural characteristics of dress and adornments as a micro-cultural system through culturally based model suggested by hamilton. The two-hundreds and eighty articles on dress and adornments were selected from newspapers(most by form Chosun Ilbo and partly from Maeil Shinbo) pulished between 1920 and 1990. The results were as follows: 1. The culture of dress and adornment received much attention during the 1930's and 1960's and little during 1950's. 2. Various cultural characteristics of dress and adornments appeared on and after 1960's: reporting more foreign news items showing foreign-oriented and future-oriented features showing cultural relativism. In the 1920's and 1970's the contents of news items on dress and adornments show the most common- mass- oriented character. Foreign-oriented cultural tendencies in cloth-ing were increasing during from 1960's to 1970's but the tendencies were turned to rather tradition-oriented features on and after 1980's compare with 1960's-1970's. Advisory critical articles on dress and adornments were small in number and insignificant but compare with other periods these received much atten-tion during the 1920's and 1980's. 3. Ideological components received much at-tention on and after 1920's to 1990. Techo-nological components received much attention during 1920's and little during 1960's. The social structural components received a little attention on and after 1920's-1940's and 1990. 4. News items on women's dress and adornments received much attention from the 1920's to 1960's and news items on both men's and women's dress and adorments were in-creasing and received much attention on and after the 1970's. 5. The pragmatic cultures were mostly re-lated to techonological components and evaluative-normative culture were mostly re-lated to ideological and social structural components. In the light of these results dress and adorments as a cultural sub-system comprise a dynamic inteacting system that articulated directly with the macro-cultural system.

• Journal of the Korean Society of Costume
• /
• v.61 no.4
• /
• pp.1-13
• /
• 2011

The purpose of this research is to find out more usages in today's fashion industry where various designs and changes of production required. And this research will also suggest new products and new directions to enhance the efficiency of product planning and production in knit industry using SDS-ONE program. Ethiopia in East Africa, knit already has been used as a school uniform. There is a big difference in temperature spread due to. Knit is a proper item to initiate the textile industries of underdeveloped countries. So this research can develop knit industry and lead the trend of introducing fashion in school uniforms. In this research, we use Paint of SDS-ONE to transform the patterned item into color jacquard, and show it on the designed clothes using simulation. It is shown that body painting pattern is suitable conditions for knit jacquard and simplified pattern can be applied as an excellent knit. And it is discovered the simulation feature of SDS-ONE program has a high efficiency and can be used effectively in African textile industry the future mass production base; SDS-ONE simulation can show various patterns and colors with constrained kinds of threads. Since the body painting designs can be applied in various fields, and from women's wear to men's wear, without limitation, we can take advantage of the broad.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1557-1566
• /
• 2004

A flame extinction phenomenon is a typical unsteady process in combustion. Flame extinction is characterized by various physical phenomena, such as convection, diffusion, and the production of heat and mass. Flame extinction can be achieved by either increasing the strain rate or curvature, by diluting an inert gas or inhibitor, or by increasing the thermal or radiant energy loss. Though the extinction is an inherently transient process, steady and quasi-steady approaches have been used as useful tools for understanding the flame extinction phenomenon. Recently, unsteady characteristics of flames have been studied by many researchers, and various attempts have been made to understand unsteady flame behavior, by using various extinction processes. Representative parameters for describing flame, such as flame temperature, important species related to reactions, and chemi-luminescence of the flame have been used as criterions of flame extinction. In these works, verification of each parameter and establishing the proper criterions of the extinction has been very important. In this study, a time-dependent flame temperature and an OH radical concentration were measured using optical methods, and the instantaneous change of the flame luminosity was also measured using a high-speed ICCD (HICCD) camera. We compare the unsteady extinction points obtained by three different methods, and we discuss transient characteristics of maximum flame temperature and OH radical distribution near the extinction limit.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1383-1389
• /
• 2011

The current study focuses on the consistent analysis of heat transfer in multichannel volumetric solar receivers used for concentrating solar power. Changes in the properties of the absorbing material and channel dimensions are considered in an optical model based on the Monte Carlo ray-tracing method and in a one-dimensional heat transfer model that includes conduction, convection, and radiation. The optical model results show that most of the solar radiation energy is absorbed within a very small channel length of around 15 mm because of the large length-to-radius ratio. Classification of radiation losses reveals that at low absorptivity, increased reflection losses cause reduction of the receiver efficiency, notwithstanding the decrease in the emission loss. As the average temperature increases because of the large channel radius or small mass flow rate, both emission and reflection losses increase but the effect of emission losses prevails.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.99-109
• /
• 2006

Igneous rocks occurring in the northwesern part of Keumsan area, Chungcheongnam-do were studied petrogeochemically. The geology of this area is composed mainly of the Precambrian biotite gneiss, age-unknown Ogchon supergroup, Jurassic biotite granite, and Cretaceous volcanic rocks, pink feldspar granite and quartz porphyry. The biotite granite is gradually changes to leucocratic nature by going from center to periphery of the rock mass. It shows variation, with distance from the center, in chemical components: $SiO_2,\;Na_2O\;and\;K_2O$ increase, whereas $Fe_2O_3,\;CaO,\;P_2O_5,\;MgO,\;and\;TiO_2$ decrease. Based on geochemical data, the biotite granite and quartz porphyry belong to subalkaline series and I-type. They show calc-alkaline differentiation trend. The biotite granite shows little negative Eu-anomaly pattern, whereas quartz porphyry show marked negative Eu-anomaly pattern, indicating that quartz porphyry was evolved further, when compared with biotite granite.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.280-286
• /
• 2019

This study verified the difference in biomechanical variation and the pattern of the lower limb between using or not using functional insoles on the gait of elderly people. Ten females subjects were selected (age: 73.2 years, height: 152.1 cm, body mass: 59.4 kg) for testing their gait with using functional insoles and without using functional insoles. The gait motions were captured with the Qualisys system and the gait parameters were calculated with Visual-3D. As a result, the subjects' stride length and swing time were significantly increased (p<.05). Also, the lower limb's extension moment was significantly increased (p<.05) when using the insole. These differences suggest the functional insole used in the experiment increases the subjects' gait stability. However, to generalize the results of this study, it is necessary to accumulate more quantitative data with more subjects. Further studies to examine gait variables and changes of walking patterns need to be conducted by gathering and utilizing the results of those subjects who have used insoles for a long period of time.

• The Korean Journal of Community Living Science
• /
• v.21 no.4
• /
• pp.509-515
• /
• 2010

The physicochemical properties of the lactic acid fermented rice flour prepared using ABT-L(mixture of Lactobacillus acidophilus, Bacillus longum, Streptococcus thermophilus) were investigated. The efficiency of deproteinizing of lactic acid fermentated rice was higher than soaking fermented rice. The structural properties of lactic acid fermented rice flour showed slightly decreased inner particle size but maintained regular structural form. Molar mass and molar size after being treated with soaking or lactic acid fermentation were decreased. Amylograms except for pasting temperature of lactic acid fermented rice flours or soaking fermented rice flours were more significantly decreased than the control sample. The ratio of flours passed through 100 mesh and 150 mesh sieves of lactic acid fermented rice flours were higher than soaking fermented rice flours. Lactic acid fermented rice flours being passed through 100 mesh sieves showed finer particle flours than those treated with soaking. These results showed that lactic acid fermentation, which can have a high efficiency on the deproteinizing of rice, contributed to the changes of particle size and its distribution of rice flour.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.1
• /
• pp.55-64
• /
• 2009

A B cell-specific growth substance (BGS) was isolated from the slime layer of Bacillus licheniformis E1. Unlike LPS, the BGS was not affected by polymixin B, an inhibitor of LPS, or by TLR4, and resulted in the growth of B cells. When BALB/c mice were treated with the BGS, the B cell population was found to increase in both the bone marrow and the spleen, with a marked increase after 24 h in the bone marrow and after 48 h in the spleen. When using antibodies to B cell lineage-restricted surface molecules to analyze the B cell population changes resulting from treatment with the BGS, an increase in immature B cells ($IgM^+$ and $AA4.1^+$) and mature B cells ($IgM^+$ and $IgD^+$) was found in the bone marrow 24 h after treatment with the BGS, whereas a decrease in mature B cells and increase in $IgG^+$ B cells were found in the spleen. When the BGS and OVA antigen were injected into the peritoneal cavity of BALB/c mice, this resulted in a high OVA-specific antibody titer in the sera, similar to that induced by aluminum hydroxide. Therefore, it is anticipated that the mass production of the BGS by B. licheniformis E1 could be used for studies of B cells in immunology, and contribute to the development of a new adjuvant for vaccine manufacture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.247-255
• /
• 2016

The purpose of this study is to investigate unsteady-state characteristics of a pintle thruster with various pintle speed. Based on steady state experimental results, non-linear pintle stroke equation is obtained and applied to the unsteady state experimental system. For the unsteady state experiments, three different pintle speeds are used: 3.10 mm/s, 5.65 mm/s, 10.83 mm/s, respectively. Results show that backward pintle stroke results in faster convergence time because of high chamber pressure during backward pintle stroke sequence. During the forward and backward process, thrust curve shows singular points. These phenomenons is caused by variation of mass flow rate, which is mainly due to changes of both chamber pressures and nozzle throat area. This behavior becomes distinctive for a faster pintle speed case.