• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.260-267
• /
• 2015

The $PM_{10}$, $SO_2$ and $NO_2$ mass concentrations were obtained over five years from monitoring stations across Nanchong, a southwest city in China. Changes in urban air quality over time, as well as the factors influencing that change, were evaluated based on air pollutant concentrations, the Air Pollution Index (API), and the Comprehensive Pollution Index (P). The results showed that the total annual mean $PM_{10}$, $SO_2$ and $NO_2$ concentrations over the five years studied were $61.1{\pm}1.1$, $45.0{\pm}3.9$ and $34.9{\pm}4.9{\mu}g{\cdot}m^{-3}$, respectively. The annual mean concentrations displayed a generally decreasing trend; lower than the annual mean second-level air quality limit. Meanwhile, the annual mean API values were in a small range of 52-53, the air quality levels were grade II, and P values were 1.06-1.21 less than the slight level ($P{\leq}1.31$). Total monthly mean $PM_{10}$, $SO_2$, $NO_2$ concentrations, and API and P values were consistently higher in winter and spring than during autumn and summer. The results of a correlation analysis showed that temperature and pressure were the major meteorological factors influencing pollution levels. Pollution sources included industrial coal and straw burning, automobiles exhaust and road dust, fireworks, and dust storms.

• The Korean Journal of Pain
• /
• v.18 no.2
• /
• pp.218-221
• /
• 2005

This report describes a case of dizziness in a patient with trigeminal neuralgia that was caused by a vestibular schwannoma. A 60-year-old man with a history of pain on his left cheek, chin, molar and tongue for 5 months was diagnosed as suffering with trigeminal neuralgia of the left mandibular nerve, and this was caused by a left vestibular schwannoma. The diagnosis of the tumor was confirmed with magnetic resonance imaging (MRI), and so gamma knife surgery was performed 1 month later. At that time, the patient had been referred to the pain clinic due to allodynia on the tongue and gingival, and hypesthesia was also present on the left half of the face. Trigeminal nerve block with dehydrogenated alcohol and stellate ganglion block with 1% mepivacaine were performed and oral medication with diphenylhydantoin was started. The symptoms were alleviated after nerve block and oral medication. Dizziness, blurred vision and ataxia then developed from the 13th hospital day. We considered the symptoms as a side effect of diphenylhydantoin and we reduced the dose of diphenylhydantoin. However, the symptoms grew worse. Another brain MRI showed a slight increase of the tumor size and a mass effect with displacement of the adjacent organs, and hydrocephalus was also noted. This case shows the importance of considering the secondary symptoms that are due to brain tumor while treating trigeminal neuralgia. The changes of the brain tumors should also be considered along with the presence of new side effects.

• Korean Journal of Animal Reproduction
• /
• v.27 no.4
• /
• pp.309-315
• /
• 2003

DNA methylation at CpG sites, which is a epigenetic modification, is associated with gene expression without change of DNA sequences. During early mouse embryogenesis, dynamic changes of DNA methylation occur. In this study, DNA methylation patterns of porcine embryos produced in vivo and in vitro were examined at various developmental stages by the immunocytochemical staining method. Interestingly, active demethylation was not observed on the paternal pronucleus of porcine zygotes. However, differences were detected in the passive demethylation process between in vivo and in vitro embryos. There was no change in the DNA methylation state until the blastocyst stage of in vivo embryos, whereas partial demethylation was observed in several blastomeres from a 4 cell stage to a morula stage of in vitro embryos. The whole genome of inner cell mass (ICM) and trophectoderm (TE) cells in porcine blastocysts were evenly methylated without de novo methylation. Our findings demonstrate that genome-wide demethylation does not occur in pig embryos during preimplantation development unlike murine and bovine embryos. It indicates that the machinery regulating epigenetic reprogramming may be different between species.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.213-220
• /
• 2010

The permeability characterization on the natural barrier for deep geological disposal of radioactive waste is very critical to evaluate total safety and performance assessment of disposal site. However, the confidence level in using previous hydraulic testing equipments consist of simple components to estimate rock mass permeability is not high enough to reflect in situ condition. The purpose of this research is to establish an advanced hydraulic testing equipment, which is applicable to deep borehole (up to 1,000 m), through the improvement of technical problems of previous packer systems. Especially, the straddle packer hydraulic testing equipment was designed to adopt both the hydraulic downhole shut-in valve(H-DHSIV) to minimize the wellbore storage effect and the real time data acquisition system to measure the pressure changes of test interval including its upper and lower parts. The results from this research lead to not only improve current technical level in the field of hydraulic testing but also provide important information to radioactive waste disposal technology development and site characterization project.

• Journal of the Korea Furniture Society
• /
• v.17 no.2
• /
• pp.57-68
• /
• 2006

This study understands rockers of today and supplies basic data of design and manufacture studying pattern change of rockers arisen in West, there is the purpose. Also, this study is investigated by dividing theoretical background of rockers, 7 kinds of American traditional rockers and European rockers from 18th century to opening part of 20th century and contemporary rockers since 20th century. The theoretical background and the style of 2 rockers (Windsor rocker, Boston rocker) were investigated to study the stylistic changes of rockers. Originally a rocker was invented by a European farmer around 1700. It developed to a household which equip practicality and comfortablness in the United States than Europe. Early rockers in a primal form appeared in the 1740s in the United States. American early rockers connected skate to established chair bridge. Rockers are deep connection with family's emotion. Rockers can provide playing functions for children and medically treating functions for adults. Windsor Rockers developed by attaching skate is mammy bench and according to shape of back form bow or hoop-back rocker, birdcage rocker, comb-back rocker. Windsor Rockers formed peculiar American tradition of craftsman furniture through structure that have a unique back of a chair and round seat. Boston Rockers were the first chairs made by mass production method. They show a particular shape with S-curve style seat and rectangular crest at the upper part of the back. Often Crests were decorated by stenciled pattern with curled leaves such as rosettes and scrolled designs.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.491-499
• /
• 1999

A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.345-359
• /
• 2016

In order to investigate the influence of the interfacial angel on failure characteristics and mechanism of combined coal-rock mass, 35 uniaxial/biaxial compressive simulation tests with 5 different interfacial angels of combined coal-rock samples were conducted by PFC2D software. The following conclusions are drawn: (1) The compressive strength and cohesion decrease with the increase of interfacial angle, which is defined as the angle between structure plane and the exterior normal of maximum principal plane, while the changes of elastic modulus and internal friction angle are not obvious; (2) The impact energy index $K_E$ decreases with the increase of interfacial angle, and the slip failure of the interface can be predicted based on whether the number of acoustic emission (AE) hits has multiple peaks or not; (3) There are four typical failure patterns for combined coal-rock samples including I (V-shaped shear failure of coal), II (single-fracture shear failure of coal), III (shear failure of rock and coal), and IV (slip rupture of interface); and (4) A positive correlation between interfacial angle and interface effect is shown obviously, and the interfacial angle can be divided into weak-influencing scope ($0-15^{\circ}$), moderate-influencing scope ($15-45^{\circ}$), and strong-influencing scope (> $45^{\circ}$), respectively. However, the confining pressure has a certain constraint effect on the interface effect.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.3
• /
• pp.141-149
• /
• 2010

Aerosol size and number concentration were observed in the atmospheric boundary layer over Beijing (from near the ground to 1,200 m) on March 15 (a clear day) and 16 (a dusty day), 2005. The results were further compared with lidar measurements in order to understand the dependency of extinction on the particle size distribution and their vertical changes. The boundary layer atmosphere was composed of several sub-layers, and a dry air layer appeared between 400 and 1,000 m under the influence of dust event. In this dry air layer, the concentration of the fine-mode particles (diameter smaller than $1.0\;{\mu}m$) was slightly lower than the value on the clear day, while the concentration of coarse-mode particles (diameter larger than $1.0\;{\mu}m$) was remarkably higher than that on the clear day. This situation was attributed to the inflow of an air mass containing large amounts of Asian dust particles and a smaller amount of fine-mode particles. The results strongly suggest that the fine-mode particles affect light extinction even in the dusty atmosphere. However, quantitatively the relation between extinction and particle concentration is not satisfied under the dusty atmospheric conditions since laser beam attenuates in the atmosphere with high concentration of particles. Laser beam attenuation effect becomes larger in the relation between extinction and coarse particle content comparing the relation between extinction and fine particle content. To clarify this problem technically, future in situ measurements such as balloon-borne lidar are suggested. Here extinction was measured at 532 nm wavelength. Measurements of extinction at other wavelengths are desired in the future.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1993.06a
• /
• pp.4-5
• /
• 1993

Toxicity tests in our laboratory are conducted usually with mass-reared organisms. They are under the same environmentel conditions throughout seasons and are supplied at specific age. A total of 38 species of aquatic organisms are being reared. We have attempted to establish pruified strains or to select clones of various parthenogenic organisms. The merits or demerits of our culturing test organisms are discussed. The differences in the susceptibility among clones or strains of test organism are also discussed. For a single species test, algae, daphnia, fish are often used. However, we usually use early stages, but occasionally, adults fish are used for reproduction tests. As an another important aspect, the toxicity through food chains has been studied. In this study, we select a pair of species belonging different trophic levels. The differences between single species tests and multispecies tests will be discussed. Even a single species test intends to assess the effects of chemicals on ecosystem levels, however, this idea is not applicable to ecosystems. Single species tests with standard organisms and multispecies tests are contradictory in concept. One type of multispecles tests is indoor microcosms being composed of severel species artificially assembled, and another is composed of natural components (both indoor and outdoor). We have used three types of outdoor mesocosms using ponds and three types of artificial streams. The mesocosms is useful to not only to analyze the floral or faun61 changes but also to study the fate or behaviour of chemicals in naturd environments. Lastly, usefulness of the field observation or experiments or semi-field experiments will be discussed. This will enhance the exploitation of early warning systems utilizing indicator organisms or animal behaviour.aviour.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.