• 펄프종이기술
• /
• 제38권5호
• /
• pp.66-73
• /
• 2006

The effects of active packaging on the surface stiffness, mass, volume, density and weight changes of fresh as well as stored eggplant were studied at 11 and $25^{\circ}C$ for 10 days with active packaging material Type 1 and 2 and control. Mass, volume, and surface stiffness of eggplant decreased linearly throughout the storage period regardless of storage conditions; while the mass density showed a reverse trend in the ease of $11^{\circ}C$ storage. Reduction rate of mass, mass density and weight was observed minimum at $25^{\circ}C$ storage temperature with active packaging Type 1. The weight of eggplant decreased at a higher rate in the initial 4 days compared to that in the later period of storage regardless of storage temperature and type of packaging.

• Water Engineering Research
• /
• 제1권3호
• /
• pp.171-185
• /
• 2000

A mathematical model to adequately predict complex mixing characteristics of sorptive polluants in natural streams with pools-and-riffes has been developed. In this model, sorption of pollutants onto the bed sediment as well as mass storage and exchange in the storage zones were incorporated into one-dimensional mass balance equatins. The geometric and hydraulic characteristics of the pool-riffle sequences were properly conceptualized. Simulations with parameters of pool-and-riffle streams better fit the measured data in overall shape and peak concentration than simulations with parameters for uniform channels. The analyses on the characteristics of the storage zone model parameters reveal that a linear relationship between the logrithm of the storage zone volume ratio and a function of the friction factor exists. A linear relatiohship might also be tenatively assumed between the logarithm of the dimensionless mass exchange coefficient and the logarithm of the aspect ratio of the storage zone if some of the high values of the dimensionless mass exchange coefficient collected on the successive bed forms are excluded.

• 스마트미디어저널
• /
• 제4권3호
• /
• pp.62-67
• /
• 2015

The trend keywords in ICT sector will be Big Data, Internet of Things, and Cloud Computing. The rear end to support those techniques requires a large-capacity storage technology of low-cost. Therefore, we proposed the prototype of low-cost and mass distributed storage system based on PC using open-source Ceph FS for SMB.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.97-99
• /
• 2002

최근 PC 시장은 USB라는 새로운 인터페이스의 보급으로 이용한 장치들이 급속도로 증가하고 있다. 또한 USB를 이용하여 저장 장치를 접근할 수 USB Mass Storage는 디지털 카메라나 MP3 Player 등에서 빠른 전송속도와 편리함 때문에 각광 받고 있다. 본 논문에서는 실시간 운영 체제인 iRTOS$^{TM}$에서 USB 인터페이스를 이용한 USB Mass Storage가 가능하도록 설계하고 이를 구현한 내용을 기술한다.

• 한국지진공학회논문집
• /
• 제26권5호
• /
• pp.203-209
• /
• 2022

A simplified method for earthquake response analysis of a rectangular liquid storage tank is proposed with fluid-structure interaction considered. In order to simplify the complex three-dimensional structural behavior of a rectangular liquid storage tank, it is assumed that structural deformation does not occur in the plane parallel to the direction in which the earthquake ground motion is applied but in the plane perpendicular to the direction. The structural deformation is approximated by combining the natural modes of the simple beam and the cantilever beam. The hydrodynamic pressure, the structure's mass and stiffness, and the hydrodynamic pressure's added mass are derived by applying the Rayleigh-Ritz method. The natural frequency, structural deformation, pressure, effective mode mass, and effective mode height of the rectangular liquid storage tank are obtained. The structural displacement, hydrodynamic pressure, base shear, and overturning moment are calculated. The seismic response analysis of an example rectangular liquid storage tank is performed using the proposed simplified approach, and its accuracy is verified by comparing the results with the reference solution by the finite element method. Existing seismic design codes based on the hydrodynamic pressure in rigid liquid storage tanks are observed to produce results with significant errors that cannot be ignored.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.176-181
• /
• 2009

In this article, excitation forces due to unbalance mass in a flywheel energy storage system will be discussed, which mainly consists of a composite flywheel and active magnetic bearings and a motor/generator. Unbalance mass causes moments as well as centrifugal forces to the center of the flywheel when the flywheel rotates. The moment excites the flywheel to revolve in the shape of conical revolution and in real operation, the flywheel shows an aspect that conical revolution is a main mode when system failure occurs. Although there are several excitation sources to the flywheel including unbalance mass, an excitation from motor and control issues of the magnetic bearings, we could infer unbalance mass is the main cause of the failure from a comparison between a composite flywheel and a steel flywheel in the same condition. In this of view, excitation forces and moments induced by unbalance mass should be carefully considered in dynamics of the flywheel so that the energy storage system can be operated in more stable conditions.

• 터널과지하공간
• /
• 제8권1호
• /
• pp.17-25
• /
• 1998

This paper investigates coupled thermal, mechanical and hydraulic phenomena in deep rock mass especially for underground heat storage system. Firstly, concepts of underground heat storage were presented and coupling phenomena in this area were illustrated. In order to understand the basic mechanism of thermal, hydraulic and deformation behavior in rock cavern disturbed by thermal gradient about 10$0^{\circ}C$, various numerical experiments were conducted using several codes. The study involves the behavior of fractured rock mass including rock joint. In spite of the limitation of codes modelling fully coupled effects, these codes could be applied in analysis of underground heat storage. The heat loss in rock mass, which is a major factor in heat storage, is insignificant in all results.

• 스마트미디어저널
• /
• 제6권1호
• /
• pp.9-15
• /
• 2017

ICT 분야의 메가 트렌드는 IoT, Bigdata, 그리고 Cloud Computing 으로 집약된다. 이러한 메가 트렌드들은 독립적으로 운영되지 않으며, 이를 지원하기 위한 백그라운드에는 대용량 컴퓨팅 기술이 필요하듯 대용량 스토리지 기술이 필수적이다. 오픈소스 Ceph 기반의 대용량 스토리지의 성능 평가를 위하여 교육망인 KOREN 네트워크를 이용한 국내 및 해외 사이트와의 Abyss Storage의 실증 테스트를 수행한다. 또한, 스토리지 자체의 성능 평가를 위하여 스토리지 매체와 네트워크 본딩의 성능 테스트를 수행한다. 스토리지 매체별로 실질적인 속도 차이는 크지만 수행된 스토리지 매체 테스트에서는 크게 성능 차이를 보이지 않았다. 이를 해결하기 위한 방안으로 네트워크 가속화를 통한 성능 향상을 얻을 수 있었다. 또한 KOREN 망을 이용한 국내 및 해외 사이트를 연결하여 Abyss Storage의 내부 및 외부 네트워크의 실질적인 성능 테스트를 수행하였다.

• 한국지진공학회논문집
• /
• 제22권7호
• /
• pp.401-409
• /
• 2018

Performance-based seismic evaluation is usually done by considering simplified models for the liquid storage tanks therefore, it is important to validate those simplified models before conducting such evaluation. The purpose of this study is to compare the seismic response results of the FSI (fluid-structure interaction) model and the simplified models for the cylindrical liquid storage tanks and to verify the applicability of the simplified models for estimating failure probability. Seismic analyses were carried out for two types of storage tanks with different aspect ratios (H/D) of 0.45 and 0.86. FSI model represents detailed 3D fluid-structure interaction model and simplified models are modeled as cantilever mass-spring model, frame type mass-spring model and shell type mass-spring model, considering impulsive and convective components. Seismic analyses were performed with modal analysis followed by time history analysis. Analysis results from all the models were verified by comparing with the results calculated by the code and literature. The results from simplified models show good agreement with the ones from detailed FSI model and calculated results from code and literature, confirming that all three types of simplified models are very valid for conducting failure probability analysis of the cylindrical liquid storage tanks.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.469-476
• /
• 2015

The purpose of this work is to investigate main factors to design a solid-state hydrogen stroage system with magnesium hydride with 10 wt% graphite using numerical simulation tools. The heat transfer characteristic of this material was measured in order to perform the highly reliable simulation for this system. Based on the measured effective thermal conductivity, a transient heat and mass transfer simulation revealed that the total performance of hydrogen storage system is prone to depend on heat and mass transfer behaviors of hydrogen storage medium instead of its inherent kinetic rate for hydrogen adsorption. Furthermore, we demonstrate that the thermodynamic aspect between equlibrium presssure and temperature is one of key factor to design the hydrogen storage system with high performance using magnesium hydride.