• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.97-108
• /
• 1996

A modeling technique is proposed for dynamic simulations of OHC valve trains with HLA(hydraulic lash adiuster). HLA is expressed by an air-oil mixture model considering HLA leak-down and aeraton effects. A compact nonlinear equation is derived which describe the short term dynamic behavior of the HLA. Valve spring is analyzed by a distributed parameter model including nonlinear characteristics in the spring surge phenomena. Global behavior of the remaining valve train is expressed by a lumped mass model. The experiental results prove that the simulation model developed here is accurate and useful for the dynamic simulations of OHC valve trains with HLA.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.355-380
• /
• 2008

In this study, the new three-dimensional finite element analysis model of guideway structures considering ultra high-speed magnetic levitation train-bridge interaction, in which the various improved finite elements are used to model structural members, is proposed. The box-type bridge deck of guideway structures is modeled by Nonconforming Flat Shell finite elements with six DOF (degrees of freedom). The sidewalls on a bridge deck are idealized by using beam finite elements and spring connecting elements. The vehicle model devised for an ultra high-speed Maglev train is employed, which is composed of rigid bodies with concentrated mass. The characteristics of levitation and guidance force, which exist between the super-conducting magnet and guideway, are modeled with the equivalent spring model. By Lagrange's equations of motion, the equations of motion of Maglev train are formulated. Finally, by deriving the equations of the force acting on the guideway considering Maglev train-bridge interaction, the complete system matrices of Maglev train-guideway structure system are composed.

• 정보처리학회논문지A
• /
• 제13A권4호
• /
• pp.371-380
• /
• 2006

본 논문은 패션 디자인 분야에서 완성된 의상의 모델 사진을 활용해 다양한 원단(직물)을 직접 Draping함으로써 새로운 디자인을 창출할 수 있고 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인 할 수 있다. 또한 모델과 원단 이미지에 대한 데이터베이스를 구축하여 실시간으로 Mapping 결과를 확인할 수 있는 시스템을 구현하였다. 그리고 여기에서 추출되는 시제품을 3D 모델에 입혀 시뮬레이션 할 수 있도록 하기 위한 과정으로 우선 여러 옷감 조각들을 이용하여 가상의 3D 인체 모델에 옷을 입히기 위한 의복 시뮬레이션 시스템을 제안한다. 제안된 시스템은 3D 인체 모델 파일과 2D 재단 패턴 파일을 읽어 들인 다음에 mass-spring model에 기반한 물리적 시뮬레이션에 의해 의복을 착용한 3D 모델을 생성한다. 본 논문의 시스템은 사실적인 시뮬레이션을 위하여 인체 모델을 구성하는 삼각형과 의복을 구성하는 삼각형 사이의 충돌을 검사하고 반응 처리를 수행하였다. 인체를 구성하는 삼각형의 수가 매우 많으므로, 이러한 충돌 검사 빛 반응 처리는 많은 시간을 필요로 한다. 이 문제를 해결하기 위하여, 본 논문에서는 Octree 공간 분할 기법을 이용하여 충돌 검사 및 반응 처리 수를 줄이는 방법을 이용하여 사실적인 영상을 생성할 수 있었고, 수초 이내에 가상 인체 모델에 의복을 입힐 수 있었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.271-276
• /
• 2004

In this paper. dynamic behavior of the cracked beam under a moving mass is presented using the finite element method (FEM). Model accuracy is improved with the following consideration: (1) FE model with Timoshenko beam element (2) Additional flexibility matrix due to crack presence (3) Interaction forces between the moving mass and supported beam. The Timoshenko bean model with a two-node finite element is constructed based on Guyan condensation that leads to the results of classical formulations. but in a simple and systematic manner. The cracked section is represented by local flexibility matrix connecting two unchanged beam segments and the crack as modeled a massless rotational spring. The inertia force due to the moving mass is also involved with gravity force equivalent to a moving load. The numerical tests for various mass levels. crack sizes. locations and boundary conditions were performed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.349-354
• /
• 2011

Tuned mass damper is widely used in many applications of industry. The main advantage of tuned mass damper is that it can increase the damping ratio of system and reduce the vibration amplitude. Meanwhile, the natural frequency of system will be divided by two peaks, and the peak speeds are closely related to the mass and the stiffness of auxiliary mass system added. In addition, the damping ratio will also affect the peak frequency of the dynamic response. In the present research, the nonlinear mechanical characteristics of rubber is investigated and put into use, since it is usually manufactured as the spring element of tuned mass damper. By the sense of the nonlinear stiffness as well as the damping ratio which can be changed by preload applied on, the shape memory alloy is proposed to control the auxiliary mass system by self-optimizing. Supported by the experiment data of rubber, the 1 DOF theoretical model and finite element model based on computer simulation are implemented to perform the feasibility of the proposed semi-active tuned mass damper working on the drive shaft.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.44-49
• /
• 1999

This paper is concerned with the theoretical and experimental study on the force conrtrol of a miniature robotic gripper. The gripper is an uniform flexible cantilever equipped with a distributed set of compact force sensor. As an actuator piezoelectric acturator, piezoelectric acturator is fixed with cupper plate at which the beam is clamped. The mathematical model of the assembled electro-mechaincal system is developed. The force sensor is described by a set of concentrated mass-spring system. The formulated equations of motion are applied to he study of a control problem where the gripper is commanded to grip an object The usefulness of the PID control technique is verified by experiment.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.104-110
• /
• 2005

GIS(Gas Insulated Switchgear) is used in electric power system, to insure non conductivity, breaking capacity and operating reliability. The commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS were used to simulate dynamic analysis of the closing resistors of the GIS in this paper. To reduce chatter vibration of closing resistors, the motion of moving and fixed parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed parts. The simulated results were compared with experimental results. As a result, chatter vibration of closing resistors of the GIS could be reduced by using the results. These data can be used to determine the spring constant, the damping coefficient and mass of a moving part to reduce chatter vibration when the next model is developed.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1607-1613
• /
• 2006

GIS (Gas Insulated Switchgear) is used in electric power system to insure non conductivity, breaking capacity and operating reliability. In the present study, dynamic analysis on the closing resistors of the GIS has bees carried out by the commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS. In order to find the minimum value of chatter vibration of closing resistors, the motion of moving and fixed resistor parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed resistor parts. The simulated results were compared with experimental results. The application of the results could reduce chatter vibration of closing resistors of the GIS. These data are also useful on the development of future model GIS with minimum chatter vibration for the determinations of the spring constant, the damping coefficient and mass of a moving part.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 추계학술발표논문집 (상)
• /
• pp.631-634
• /
• 2001

가상 현실이나 게임 제작 분야에서는 움지임에 따른 변형을 실시간으로 처리하는 것이 요구되고 있다. 변형 처리를 위한 일반적인 모델은 질량-스프링(mass-spring) 방법을 이용한 것으로, 그 구현이 쉽고 처리 속도가 빨라 대화형 시스템(interactive system)에서 실시간 처리를 위한 모델로 주목되고 있다. 반면에, 이 모델은 외부의 제어에 대하여 super-elastic한 문제를 내포하여 그 적용이 제한되어 있다. 본 논문에서는 스프링 모델의 근본적인 문제인 super-elastic 문제를 극복하기 위한 근사 방법을 제안한다. 제안하는 방법은 하이브리드 접근 방식으로, 이산 점 사이의 내부 힘들을 선처리(pre-processing)하여 elastic한 성분을 나누어 처리한다. 선처리 과정에서는 변형 물체의 물리적 속성에 따라 늘어나는(elongation) 성분과 굽어지는(bending) 성분을 따로 처리함으로써, 극심히 늘어나는(super-elongation) 문제를 극소화할 수 있다. 본 논문의 결과로는 빈번한 제어에 대응되는 움직임을 빠르게 생성할 수 있음을 보이며, 안정적이면서 그럴 듯한 움직임을 생성할 수 있음을 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.329-330
• /
• 2013