• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.115-120
• /
• 2002

The rigid body properties of a structure may be estimated easily if the mass-line of the structure could be taken exactly. However, the exact mass-line may be hard to be obtained exactly in experiments. The mass line value can be read from the mass line in frequency response function. However, the mass lines in the frequency response function sometimes show the fluctuation with frequency, and it cannot be read correctly. In this paper, the wavelet transform is applied to obtain the good mass line value. The mass line calculated by using wavelet transform has unique value and showed in the range of fluctuated values of frequency response function. The rigid body properties obtained by wavelet transform also showed better results than those by fourier transform.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.725-730
• /
• 2002

The rigid body properties of a structure may be estimated easily if the mass-line of the structure could be taken exactly. However, the exact mass-line nay be hard to be obtained exactly in experiments. The mass line value can be read from the mass line in frequency response function. However, the mass lines in the frequency response function sometimes show the fluctuation with frequency, and it cannot be read correctly. In this paper, the wavelet transform is applied to obtain the good mass line value. The mass line calculated by using wavelet transform has unique value and showed in the range of fluctuated values of frequency response function. The rigid body properties obtained by wavelet transform also showed better results than those by fourier transform.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.745-749
• /
• 2001

The rigid body properties of a structure may be estimated easily if the mass-line of the structure could be taken exactly. However, the exact mass-line cannot be obtained experimentally. In the past years, the modal analysis for which the structure is mounted on the flexible supporter is frequently used to acquire the mass-line. Unfortunately, it is difficult not only to mount the structure but also to decouple the coupled 6 dof mode. If the structure is pended by very long and flexible rope to act free, the rigid-body modes influenced by the rope will be eliminated and the improved mass-line will be obtained. In this paper, the method using the mass-line of F.R.F. for rigid body in free-condition is suggested. The robustness of the suggested method was tested and verified numerically. The experimental results also showed a good agreement with the true value.

• 한국의류학회지
• /
• 제26권11호
• /
• pp.1527-1576
• /
• 2002

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers can: t touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purpose of this study is to investigate the differences of consumer's texture sensibility of apparel products based on marketing channels (on-line/off-line). Two types of questionnaires for on-line and of f-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected in regard to the previous literatures. 205 questionnaires for each type (on-line/off-line) were distributed. Statistical devices were t-test, mean and standard deviation with SPSS10.0. The result of this study was showed that there were partially significant differences on consumers' texture sensibility on apparel products between on-line and off-line. Under on-line environment, consumers perceived corduroy as warm, strong, and sandy. taffeta as warm, sandy, and glossy, denim as sandy, and warm, organza as sandy, and thin, satin as sandy, dense, and modern, chiffon as sandy, and flat, velvet as warm, and soft, single jersey as warm, soft, and comfortable. Therefore, apparel firms cooperating based Mass-Customization in e-business have to pay attention to the differences on consumers’ texture sensibility of on-line apparel products from those of off-line.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.241-246
• /
• 1989

Quadrupole mass spectrometer를 이용한 발효 배기가스의 분석을 통해 세포의 증식을 on-line monitoring하고자 model 균주로 Candida utilis에 대해 연구하였다. Quadrupole mass spectrometer와 interface된 16-bit 개인용 컴퓨터 (IBM PC-AT)에서 산소 소비속도(OUR)와 이산화탄소 발생속도(CER)를 on-line 계산할 수 있었고 계속해서 이들 계산치로부터 세포농도와 증식속도 및 비증식속도를 계산하였다. 계산된 값들은 실험적으로 측정한 세포농도 및 비증식속도와 잘 일치함을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.317-322
• /
• 2002

There are many researches to identify the rigid body properties from the mass-line obtained by impact hammer testing. The correct rigid body properties of the structure may be estimated if the mass-line of the structure could be obtained exactly. When the structure is mounted by elastic materials, the mass-line cannot be read correctly from the impulse response spectrum. The reason is due to the effects of rigid body modes of mounted structure. In this paper, the effects of rigid body modes of mounted structure to the mass-line are discussed and the method to remove these effects is also presented.

• 천문학회보
• /
• 제41권2호
• /
• pp.61.1-61.1
• /
• 2016

Black hole (BH) mass is a fundamental quantity to understand BH growth, galaxy evolution, and connection between them. Thus, obtaining accurate and precise BH mass estimates over cosmic time is of paramount importance. The rest-frame UV CIV ${\lambda}1549$ broad emission line is commonly used for BH mass estimates in high-redshift AGNs (i.e., $2{\leq}z{\leq}5$) when single-epoch (SE) optical spectra are available. Achieving correct and accurate calibration for CIV-based SE BH mass estimators against the most reliable reverberation-mapping based BH mass estimates is thus practically important and still useful. By performing multi-component spectral decomposition analysis to obtained high-quality HST UV spectra for the updated sample of local reverberation-mapped AGNs including new HST STIS observations, CIV emission line widths and continuum luminosities are consistently measured. Using a Bayesian hierarchical model with MCMC sampling based on Hamiltonian Monte Carlo algorithm (Stan NUTS), we provide the most consistent and accurate calibration of CIV-based BH mass estimators for the three line width characterizations, i.e., full width at half maximum (FWHM), line dispersion (${\sigma}_{line}$), and mean absolute deviation (MAD), in the extended BH mass dynamic range of log $M_{BH}/M_{\odot}=6.5-9.1$.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.22-26
• /
• 2013

The purpose of this study was to improve the design of a mooring line by attaching a lumped mass to it on the seabed. A numerical analysis of the redesigned mooring system is performed to analyze the effect of the weight of the attached lumped mass using the commercial software Orcaflex. The ultimate tension of the mooring system with the lumped mass is compared with that of a bare mooring line in the original design. An appropriately designed weight for the lumped mass is found to induce a critical lifted point in the mooring line by floater motion in the ultimate condition to move toward the floater position from the anchor point, while maintaining a similar safety factor for the mooring line. On the other hand, it is shown that excess weight for the lumped mass induces snapping in a mooring line, resulting in low safety factor for the mooring system. The distance between lumped weights is shown to be a minor parameter affecting the safety of a mooring line, although a shorter line has an advantage from an economic point of view. Using the optimal weight for the lumped mass attached to the mooring line on a seabed reduces the mooring line length and installation area occupied by a mooring system under real sea conditions.

• KSBB Journal
• /
• 제4권2호
• /
• pp.118-122
• /
• 1989

Candida utilis를 model균주로 하여 세포증식과 기질소모를 on-line 간접측정하고자 개인용 컴퓨터(IBM PC-AT)와 interface된 quadrupole mass spectrometer로 발효 배기가스를 분석하였다. 5분마다 연속적으로 분석되는 질소, 산소, 이산화 탄소 및 수증기의 mole백분율(%)로부터 산소 소비속도(OUR)와 이산화 탄소 발생속도(CER)를 on-line으로 계산하였다. 미리 실험 결과치로부터 결정한 maintenance와 수율 상수들($k_1k_2 $ 값을 이용하여 세포농도와 기질인 포도당의 농도를 on-line으로 간접추정하였다. 간접추정된 값들은 실험적으로 측정한 세포농도 및 기질농도와 잘 일치함을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.336.2-336
• /
• 2002

There are many researches to identify the rigid body properties from the mass-line obtained by impact hammer testing. The correct rigid body properties of the structure may be estimated if the mass-line of the structure could be obtained exactly. When the structure is mounted by elastic materials, the mass-line cannot be read correctly from the impulse response spectrum. The reason is due to the effects of rigid body modes of mounted structure. (omitted)