• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.830-840
• /
• 2017

Excessive body weight gain during the growth period of early life may predispose individuals towards obesity and metabolic disorder in later life. We investigated the possibility of using the food efficiency ratio as an early indicator for predicting susceptibility to diet-induced obesity and insulin resistance. Four-week-old, prepubertal, male Sprague Dawley rats were divided into obesity-prone and obesity-resistant groups based on food efficiency ratio values after five days on a high-fat diet. Metabolic parameters measured after 2, 6, and 10 weeks, and specific phenotypes were compared with each group. Obesity-prone rats had higher increases in body weight and fat mass compared to obesity-resistant rats over the study period. Obesity-prone rats became glucose intolerant early in this study and remained so throughout the experimental period, with increases in fat weight and leptin levels occurring first, followed by increases in insulin level. Gluconeogenesis and insulin resistance significantly increased in obesity-prone groups in which activities of glucose-6-phosphatase and phosphoenolpyruvate carboxykinase were increased and glucokinase activity decreased. Higher food efficiency ratio at an early age was closely correlated with body fat accumulation, hyperleptinemia, and hyperinsulinemia of middle and elderly age. We suggest a high food efficiency ratio in prepubertal subjects may be a useful predictor of future obesity and insulin resistance.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.600-605
• /
• 2018

In this study, the combustion characteristics were investigated based on the biodrying solid recovered fuel (SRF) in a 5 Ton/day scale combustion boiler. The composition of the combustion gas containing the biodrying SRF was analyzed, the particulate matter, and its HCl content was determined with the air pollutant process test method. Mass balance, carbon balance, and combustion efficiency were calculated according to the equivalence ratio (ER) method; the energy recovery efficiency of the combustion boiler was also analyzed. The overall combustion efficiency of the biodrying SRF was 97.3 % and the energy recovery efficiency was 80.2%.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.78.2-78.2
• /
• 2005

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.502-503
• /
• 2010

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.152-153
• /
• 2009

• Journal of Nutrition and Health
• /
• v.34 no.8
• /
• pp.865-871
• /
• 2001

The adipose tissue hormone leptin has been proposed to be involved in the regulation of flood intake and energy expenditure via thermogenesis by uncoupling protein(UCP) in brown adipose tissue(BAT). The objective of the study was to examine the effects of high fat diet on the serum leptin levels, BAT UCPl expression and the body fat mass in rats after weaning. During experimental period of 12 weeks, 4 male Sprague-Dawley rats were killed for the baseline experiment at 4 weeks of age while the remaining rats were fed the two different diets: the control diet AIN-76A(n = 20), high fat(beef tallow) diet(n = 20) ad libitum, which provided 11.7% or 40% of calories as fat, respectively. At 16 weeks of age, the increase in the food efficiency ratio(FER) was related to fat mass in rats on high fat diet. Serum leptin level was increased by age and dietary high fat. There was no difference in serum insulin level between groups until 10 weeks of age, but rats fed high fat diet for 12 weeks showed hyperinsulinemia. The amount of body fat pads was increased significantly in high fat group compared to normal diet group. Visceral fat mass affected acutely by high fat diet, as a result, it was higher in rats fed high fat diet for 2 weeks than normal diet. At 16 weeks of age, BAT and visceral fat mass were significantly high in high fat group. Also, the serum leptin levels reflected the amount of body fat mass. BAT UCPI mRNA expression increased with age and dietary high fat. This study demonstrates that dietary high fat increased serum leptin levels, BAT UCPI expression and body fat mass. Futhermore, in rats fed high fat diets, the increases in leptin and UCPI expression counteracts only in part the excess adiposity and obesity.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2014

In this paper, effects of physical configurations and operating conditions on bubble column performance were analyzed in terms of bubble hydrodynamic and mass transfer parameters. Bubble column with 3 different dimensions and 7 gas diffusers (single / multiple orifice and rigid / flexible orifice) were applied. High speed camera and image analysis program were used for analyzing the bubble hydrodynamic parameters. The local liquid-side mass transfer coefficient ($k_L$) was estimated from the volumetric mass transfer coefficient ($k_La$) and the interfacial area (a), which was deduced from the bubble diameter ($D_B$) and the terminal bubble rising velocity ($U_B$). The result showed that the values of kLa and a increased with the superficial gas velocity (Vg) and the size of bubble column. Influences of gas diffuser physical property (orifice size, thickness and orifice number) can be proven on the generated bubble size and the mass transfer performance in bubble column. Concerning the variation of $k_L$ coefficients with bubble size, 3 zones (Zone A, B and C) can be observed. For Zone A and Zone C, a good agreement between the experimental and the predicted $K_L$ coefficients was obtained (average difference of ${\pm}15%$), whereas the inaccuracy result (of ${\pm}40%$) was found in Zone B. To enhance the high $k_La$ coefficient and absorption efficiency in bubble column, it was unnecessary to generate numerous fine bubbles at high superficial gas velocity since it causes high power consumption with the great decrease of $k_L$ coefficients.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.223-227
• /
• 2006

In this study, the combustion characteristics was studied with various oxidizer in hybrid propulsion system. In this experiments $GN_2O$ and GOX were used as oxidizer, and PE was used as fuel. The combustion behavior was explained by flame temperature with mass O/F ratio, and the use of $GN_2O$ as the oxidizer caused a increase in combustion efficiency with GOX in the same hybrid motor. The mass flow rate of gaseous oxidizer was controlled by the several chocked orifices that have different diameter, and the oxidizer supply range was $0.0138{\sim}0.0427kg/sec$. As result, the empirical relation for oxidizer type was represented by mass flux of solid fuel, it was obtained with mass transfer number, and mass flux of oxidizer.

• Geomechanics and Engineering
• /
• v.6 no.6
• /
• pp.517-530
• /
• 2014

Seismic ground response analysis is one of the most important issues in geotechnical earthquake engineering. Conventional seismic site response and free field analysis of layered soils does not consider the effect of surcharge mass which may be present on the top layer. Surcharge mass may develop extra inertial force to the soil and, hence, significantly affect on the results of seismic ground response analysis. Methods of analysis of ground response may also be categorized into time domain and frequency domain concepts. Simplicity in developing analytical relations and accuracy in considering soil dynamic properties dependency to loading frequency are benefits of frequency domain analysis. In this part of the paper, seismic ground response is analyzed using transfer function method for soil layers considering surcharge mass on the top layer. Equation of motion, wave equation, is solved using amended boundary conditions which effectively take the impact of surcharge mass into account. A computer program is developed by MATLAB software based on the solution method developed for wave equation. Layered soils subjected to earthquake loading were numerically studied and solved especially by the computer program developed in this research. Results obtained were compared with those given by DEEP SOIL computer program. Such comparison showed the accuracy of the program developed in this study. Also in this part, the effects of geometrical and mechanical properties of soil layers and especially the impact of surcharge mass on transfer function are investigated using the current approach and the program developed. The efficiency and accuracy of the method developed here is shown through some worked examples and through comparison of the results obtained here with those given by other approaches. Discussions on the results obtained are presented throughout in this part.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2708-2713
• /
• 2007

The aim of this paper is further studies to achieve deeper understanding in this field. First investigate the influence of operating conditions and design parameters on the hydrodynamics and the mass transfer properties of a loop reactor. This paper provides a literature review on the ejectors applications in the mixing system. A number of studies are grouped and discussed in several topics such as the background, theory of ejector, mixing characteristics, optimization of the system. Since the high efficiencies reactor using ejector widely used in gas-liquid system, especially in a number of chemical and biochemical processes. This is due to their high efficiency in gas dispersion resulting in high mass transfer rate and low power requirements. Thus ejector has been applied to the mixing system. An investigation on hydrodynamics and mass transfer characteristics of gas-liquid ejector has been carried out using three-dimensional CFD modeling.