• Journal of Animal Science and Technology
• /
• 제66권1호
• /
• pp.1-30
• /
• 2024

Interest and investment in cultivated meat are increasing because of the realization that it can effectively supply sufficient food resources and reduce the use of livestock. Nevertheless, accurate information on the specific technologies used for cultivated meat production and the characteristics of cultivated meat is lacking. Authorization for the use of cultivated meat is already underway in the United States, Singapore, and Israel, and other major countries are also expected to approve cultivated meat as food once the details of the intricate process of producing cultivated meat, which encompasses stages such as cell proliferation, differentiation, maturation, and assembly, is thoroughly established. The development and standardization of mass production processes and safety evaluations must precede the industrialization and use of cultivated meat as food. However, the technology for the industrialization of cultivated meat is still in its nascent stage, and the mass production process has not yet been established. The mass production process of cultivated meat may not be easy to disclose because it is related to the interests of several companies or research teams. However, the overall research flow shows that equipment development for mass production and cell acquisition, proliferation, and differentiation, as well as for three-dimensional production supports and bioreactors have not yet been completed. Therefore, additional research on the mass production process and safety of cultivated meat is essential. The consumer's trust in the cultivated meat products and production technologies recently disclosed by some companies should also be analyzed and considered for guiding future developments in this industry. Furthermore, close monitoring by academia and the government will be necessary to identify fraud in the cultivated meat industry.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.223-229
• /
• 2020

오늘날 과학 기술의 발전은 우리의 삶의 방식을 송두리째 바꾸어 놓고 있으며, 과거 세계의 전쟁사를 보면, 군사 과학 기술에서 우위를 가진 국가나 민족은 언제나 승자였다. 새로운 기술의 출현은 전쟁 양상을 크게 변화시킬 뿐만 아니라 군의 작전 운용 개념과 조직체계에도 많은 영향을 미친다. 또한, 안보환경의 패러다임이 변화함에 따라 선진국은 자국의 안보를 위해 국방연구개발에 많은 투자를 하고 있다. 이에 따라, 무기체계의 탐색개발부터 양산, 배치, 군수지원에 이르는 획득 전순기에 걸쳐 업무를 수행하는 국방획득인력의 전문성에 대한 중요성은 아무리 강조해도 지나치지 않다고 할 것이다. 이 분야 선진국인 미국에서는 국방획득분야에 종사하는 인력에 대한 업무효율성을 증진시키기 위하여 지난 1990년에 국방획득부차관 지시로 획득인력에 대하여 교육과 훈련, 경력개발에 관한 법을 공표하여 시행해오고 있다. 본고에서는 체계적인 교육체계 시행이후 획득인력의 업무수준 향상에 많은 기여를 하고 있다는 평가를 받고 있는 미획득인력에 대한 주요 교육요구내용에 대하여 Desk Guide와 미의회보고서 등을 참조하여 작성하였으며, 최근의 동향에 대해서도 작성하였다., 특히 충격에너지를 약 6.8 kg·m/㎠ 이하로 제어하는 것이 관통능력 향상에 있어서 가장 중요한 요소로 생각된다.

• 암석학회지
• /
• 제10권3호
• /
• pp.172-178
• /
• 2001

1997읜 이후 한국기초과학지원연구원에 K-Ar 연대 측정 시스템이 도입되어 현재 이용중이다. 이 시스템은 흑연전기로, 가스 전처리 장치, 질량분석기와 자료획득장치로 구성되어 있으며 K-Ar연대 측정은 $^{38}$ Ar을 스파이크로 이용하는 동위원소 희석법에 의한 정밀한 Ar 농도 측정과 원자흡광분석을 통한 K 정량분석에의해 이루어진다. 연대가 잘 알려진 K-Ar 연대측정용 표준물질을 이용하여 시스템의 정밀성과 정확성을 확인하였다. 백만년 이하의 연대를 갖는 시료의 경우 질량분석기의 감도와 질량차별지수의 미약한 변화에도 큰영향을 받기 때문에 정확한 연대 측정이 곤란하나 중생대 및 제 3기의 K-Ar 연대를 갖는 표준시료의 연대를 측정했을 때, 믿을 만한 결과를 내고 있다. $92.6\pm$0.6 Ma의 연대가 알려진 SORI93혹운모의 경우 92.1$\pm$1.1 Ma의 연대를 얻을 수 있었고, $18.5\pm$0.6 Ma의 Bern4M 백운모는 권고치와 유사한 $17.8\pm$0.2 Ma의 연대를 얻을 수 있었다. .

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1295-1299
• /
• 2003

The Mass Flow Controller(MFC) has become crucial in semiconductor manufacturing equipments. It is an important element because the quality and the yield of a semiconductor process are decided by the accurate flow control of gas. Therefore, the demand for the high speed and the highly accurate control of MFCs has been requested. It is hard to find an article of the control algorithm applied to MFCs. But, it is known that commercially available MFCs have PID control algorithms. Particularly, when the system detects the flow by way of heat transfer, MFC control problem contains the time delay and the nonlinearity. In this presentation, MFC control algorithm with the superior performance to the conventional PID algorithm is discussed and the superiority is demonstrated through the experiment. Fuzzy controller was utilized in order to compensate the nonlinearity and the time delay, and the performance is compared with that of a product currently available in the market. The control system, in this presentation, consists of a personal computer, the data acquisition board and the control algorithm carried out by LabWindows/CVI program on the PC. In addition, the method of estimating an actual flow from sensor output containing the time delay and the nonlinearity is presented. In conclusion, according to the result of the experiment, the proposed algorithm shows better accuracy and is faster than the conventional controller.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.1002-1009
• /
• 2004

Direct contact air conditioning systems, in which heat and mass are transferred directly between air and water droplets, have many advantages over conventional indirect contact systems. The purpose of this research is to investigate the cooling and heating performances of direct contact air conditioning system for various inlet parameters such as air velocity, air temperature, water flow rate and water temperature. The experimental apparatus comprises a wind tunnel, water spray system, scrubber, demister, heater, refrigerator, flow and temperature controller, and data acquisition system. The inlet and outlet conditions of air and water are measured when the air contacts directly with water droplets as a counter flow in the spray section of the wind tunnel, and the heat and mass transfer rates between air and water are calculated. The droplet size of the water sprays is also measured using a Malvern Particle Analyzer. In the cooling conditions, the outlet air temperature and humidity ratio decrease as the water flow rate increases and as the water temperature, air velocity and temperature decrease. On the contrary, the outlet air temperature and humidity ratio increase in the heating conditions as the water flow rate and temperature increase and as the air velocity decreases.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.508-519
• /
• 2018

This paper concerns on stabilization control of a gyro-stabilized 2-axes gimbal system which is mounted on a moving vehicles such as automobiles, armored vehicles, ships, flying vehicles, etc. A target image acquisition system is attached on the inner gimbal, and the gimbal systems are required to retain high stabilization accuracy in the absolute coordinate in order to provide fine target image while vehicle is moving. The stabilization control performance is hardly depended upon disturbance rejection ability of control, and disturbance feedforward compensation is effective because feedforward compensation reduce the amount of disturbance before the disturbance disturbs the systems. This paper suggests an experimental method which can estimate system parameters and disturbance torques by using 3-axes accelerometer mounted on the inner gimbal. Furthermore, a simple disturbance identification method which can be applied to any slanted base conditions has been suggested to identify mass unbalance vector and friction torques of each gimbal simultaneously. By using the estimated parameters, a feedforward compensation has been applied to the gyro-stabilized 2-axes gimbal system. The experimental results showed that the feedforward compensation based on the identification method suggested is effective to improve stabilization performances.

• 한국추진공학회지
• /
• 제14권1호
• /
• pp.40-47
• /
• 2010

본 연구에서는 하이브리드 로켓의 산화제 유량 제어를 통한 추력제어를 위한 기초 연구를 진행하였다. 실험을 위해 하이브리드 로켓 모터와 산화제 유량 조절장치 그리고 데이터 획득을 위한 전체 시스템을 설계, 제작하였다. 산화제 유량 제어를 하기 위해서 니들밸브와 스텝모터를 결합하여 스텝모터의 구동에 의해 니들밸브의 개폐량을 조절할 수 있도록 설계하였고 LabVIEW프로그램을 이용하여 스텝모터를 컨트롤 하였다. 또한 기체산소($GO_2$)와 고체연료(Polyethylene)를 이용한 하이브리드 로켓의 연소실험을 통해 산화제 유량 제어를 통한 하이브리드 로켓의 추력제어 가능성을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.303-309
• /
• 2012

본 연구는 인체의 활동량과 음성 신호를 기반으로 에너지 소모량을 추정하고자 수행하였으며, 3축 가속도 센서와 PVDF(polyvinylidene fluoride) 필름을 이용하여 활동량과 음성 신호를 검출하였다. 인체의 움직임과 음성 신호, 그리고 실제 에너지 소모량 값은 MP-150 시스템과 호흡가스 분석기를 이용하여 수집하였다. 음성신호의 전력 값과 피험자의 체중을 독립 변수로 활용하였을 때 0.918의 R 제곱 값을 보였으며, 활동량 분석에 있어서는 SVM(signal vector magnitude), BMI(body mass index), 키, 그리고 나이를 독립 변수로 활용하였을 때 가장 높은 상관성을 나타냈다. 음성과 활동량을 토대로 하는 에너지 소모량 추정은 활동량만을 이용하여 추정하는 기존의 기기보다 정확한 결과값을 제공할 수 있음을 확인하였다.

• 아동학회지
• /
• 제2권
• /
• pp.41-53
• /
• 1981

The purpose of this study was to find out conservation concept acquisition in children of pre-operational and concrete periods. The data in this study were obtained through experimental methods with 62 children(28 males and 34 females) of 3-11 ages in Korean rural areas. The Piagetian instruments devised by Gelman were used for the study ; length, liquid, quantity, mass, and volume conservation tasks. Percentile and $x^2$-test were applied for the statistical analysis of data: and the results of the experiment are as follows: 1) Most children aged 3-9 years did not appear to understand that the length of sticks stayed the same regardless of position. 2) In liquid quantity conservation, children centered their attentions on one aspect ; juice level or number of container. Their conservation concept was developed correlating with ages. 3) In the experiment of mass conservation by using play dough, only 7.1% of children of pre-operational period and 47.1% of concrete period affirmed that the amounts of play dough were same after changed shape. 4) In volume task, 29.4% children aged 7 to 11 years admitted to conservation. 5) It is found that girls acquired length conservation earlier than boys, while there was no significant difference between boys and girls in other conservation tasks.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2022

In this study, vibration analysis of washing machine dehydration was carried out using laser sensors. The suspension of the washing machine was attached to a jig developed for this study. In addition, 10 laser sensors were attached to the jig. The channels of each laser sensor are composed of five channels: front, rear, left, right, and upper. Data acquisition equipment was used to obtain sensor data. The measured data were processed using signal processing, and interpolation of the data was performed using MATLAB with robust interpolation. Vibration analysis according to unbalanced mass and sensor attachment points was carried out.