• 한국컴퓨터정보학회논문지
• /
• 제27권10호
• /
• pp.185-193
• /
• 2022

본 연구는 성인 여성의 얼굴 유형에 적합한 마스크 패턴 개발을 위하여 시판되고 있는 다회용 마스크 패턴을 비교·분석하고자 하였다. 이를 통해 마스크 패턴 개발 및 생산업체에 필요한 자료를 제공하고자 하였다. 시판 다회용 마스크 패턴의 치수 및 형태를 비교한 결과, 성인용으로 제작된 L사이즈 마스크임에도 불구하고 치수에 있어서 큰 차이를 나타냈다. 가상착의에 대한 외관평가 결과 정면의 앞중심선의 수직, 마스크의 윗부분 감쌈과 여유, 코높이, 마스크 아랫부분의 감쌈과 여유에서 디자인별로 유의미한 차이가 있었다. 측면도 얼굴 옆부분의 감쌈, 옆부분의 여유, 끈 간격과 길이에서 유의미한 차이를 나타냈다. 외관평가 결과, 마스크4가 가장 좋은 평가를 받았다. 마스크 패턴의 형태는 코 아랫부분에 크게 다트가 있어 얼굴의 입체적인 형태를 커버할 수 있도록 되어 있으나 마스크에 따라 곡선의 정도와 각도에 차이를 나타냈다. 마스크 상부와 마스크 하부, 볼 부분은 밀착되지만, 코와 입 부분에는 여유가 있는 마스크 패턴의 평가가 높았다. 마스크 패턴은 얼굴형 및 치수에 대한 분석을 통해 마스크 상부길이와 하부길이, 코 높이에 따른 마스크 다트량의 설정이 이루어져야 할 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2371-2376
• /
• 2021

As the γ-ray energy increases, a reconstructed image becomes noisy and blurred due to the penetration of the γ-ray through the coded mask. Therefore, the thickness of the coded mask was increased for high energy regions, resulting in severely decreased the performance of the detection efficiency due to self-collimation by the mask. In order to overcome the limitation, a modified uniformly redundant array γ-ray imaging system using dual anti-mask method was developed, and its performance was compared and evaluated in high-energy radiation region. In the dual anti-mask method, the two shadow images, including the subtraction of background events, can simultaneously contribute to the reconstructed image. Moreover, the reconstructed images using each shadow image were integrated using a hybrid update maximum likelihood expectation maximization (h-MLEM). Using the quantitative evaluation method, the performance of the dual anti-mask method was compared with the previously developed collimation methods. As the shadow image which was subtracted the background events leads to a higher-quality reconstructed image, the reconstructed image of the dual anti-mask method showed high performance among the three collimation methods. Finally, the quantitative evaluation method proves that the performance of the dual anti-mask method was better than that of the previously reconstruction methods.

• 한국의류학회지
• /
• 제44권4호
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.73-83
• /
• 2024

In this study, environmental evaluation of high barrier coated paper (coating layer/paper) packaging is conducted in comparison with conventional aluminum laminated (PET/VMPET/LLDPE) plastic packaging. The target product for this packaging is a KF94 mask, which requires a high barrier of water and oxygen to maintain the filtration ability of the mask filter. The functional unit of this study is 10,000 mask packaging materials based on a material capable of blocking oxygen (<1 g/m²day) and moisture (<3 g/m²day) for the preservation of KF94 masks. In order to understand the results easily, paper-based mask packaging system divided into 6 stages (pulp, pulping & paper making, calendaring & coating, printing, packing and waste management), while plastic-based mask packaging consists of 5 stages (material production, processing, printing, packing, waste management) In case of paper-based mask packaging, most contributing stage is calendaring & coating, resulting from heat and electricity production. On the other hand, plastic-based mask packaging is contributed more than 30% by material production, specifically due to linear low density polyethylene and purified terephthalic acid production. The comparison results show that global warming potential of paper-based mask packaging has 32% lower than that of plastic-based mask packaging. Most of other impact indicators revealed in similar trend.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.348-352
• /
• 2008

Deformation of the shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size organic light emitting diode (OLED). The larger the glass substrate, the larger the shadow mask becomes. As the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new method for reducing drooping of the shadow mask for large size OLED vapor depositions is proposed. The proposed shadow mask with cross stripe wires has higher stiffness than the pure shadow mask, which results in reducing drooping of the shadow mask. A commercial FEM program, ANSYS, is used for the evaluation of the proposed shadow mask. The analysis showed that the shadow mask with cross stripe wires have an effect on reducing drooping about 18.6% or more.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.164-168
• /
• 2007

Deformation of a shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size OLED. The larger the glass substrate, the larger the shadow mask becomes. But as the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new type mask-frame structure is proposed. The proposed mask-frame structure making a curved mask has the ability of reducing drooping of mask. The test frame is fabricated and evaluation experiments are performed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권9호
• /
• pp.2605-2625
• /
• 2024

Siamese-based segmentation and tracking algorithms improve accuracy and stability for video object segmentation and tracking tasks simultaneously. Although effective, variability in target appearance and background clutter can still affect segmentation accuracy and further influence the performance of tracking. In this paper, we present a memory propagation-based target-aware and mask-attention decision network for robust object segmentation and tracking. Firstly, a mask propagation-based attention module (MPAM) is constructed to explore the inherent correlation among image frames, which can mine mask information of the historical frames. By retrieving a memory bank (MB) that stores features and binary masks of historical frames, target attention maps are generated to highlight the target region on backbone features, thus suppressing the adverse effects of background clutter. Secondly, an attention refinement pathway (ARP) is designed to further refine the segmentation profile in the process of mask generation. A lightweight attention mechanism is introduced to calculate the weight of low-level features, paying more attention to low-level features sensitive to edge detail so as to obtain segmentation results. Finally, a mask fusion mechanism (MFM) is proposed to enhance the accuracy of the mask. By utilizing a mask quality assessment decision network, the corresponding quality scores of the "initial mask" and the "previous mask" can be obtained adaptively, thus achieving the assignment of weights and the fusion of masks. Therefore, the final mask enjoys higher accuracy and stability. Experimental results on multiple benchmarks demonstrate that our algorithm performs outstanding performance in a variety of challenging tracking tasks.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.469-474
• /
• 2009

Purpose: A lower facial contouring surgery has become a commonly performed procedure in Asia. Currently, mandibular angle sagittal ostectomy and botulinum toxin type A treatment are main procedures for aesthetic correction of a broad lower face. There are a few date to show the differences in the mandibular contouring changes between mandibular angle splitting ostectomy and botulinum toxin type A treatment. Facial golden mask is easy to apply, inexpensive, and relatively objective for evaluation of facial contour analysis. This study was designed specifically to compare the changes in lower face width after two different forms of lower facial contouring procedure using facial golden mask. Methods: Seventeen patients, aged 18 to 55 years (mean, 28.6 years), 15 women and 2 men, consented to the study and receive a contouring procedure of lower face. The patients were classified in to 2 groups. In group A, the sample consisted of 10 patients with a prominent squared mandibular angle and mandibular angle splitting ostectomy was performed. In group B, the sample consisted of 7 patients with masseteric hypertrophy and botulinum toxin type A treatment was performed. Photographs of the face were taken to record the facial change at preoperative and postoperative. The postoperative photographs were taken to considered maximal effect at 2 years after surgery in group A and 4.8 months after treatment in group B. The authors applied the facial golden mask to preoperative and postoperative photographs and horizontal ratio, which compares facial width with golden mask width, were calculated. We made an analysis of the result of horizontal ratio using SPSS. Results: Overall average horizontal ratio of pre- and postoperative photos of group A were 1.24 and 1.11, whereas overall average horizontal ratio of pre- and postoperative photos of group B were 1.19 and 1.12. The horizontal ratio decreased 10.24% in group A and 5.93% in group B. There was a statistically significant change in before and after treatment, but there was no significant change in comparing the group A and group B. Conclusions: The result from this study suggest that mandibular angle sagittal ostectomy and botulinum toxin type A treatment showed relatively satisfactory clinical effects on lower facial contouring treatment. There was no statistical significant difference within two lower facial contouring treatment. Facial golden mask is easy to apply, inexpensive, and relatively objective, so we think that facial golden mask is a good method for evaluation of lower facial contouring treatment.

• 한국응용과학기술학회지
• /
• 제37권6호
• /
• pp.1773-1778
• /
• 2020

본 연구는 히알루론산을 함유한 온도 감응성 하이드로겔 마스크 팩을 이용하여 피부개선효과 및 사용감을 평가하였다. 임상시험 기준에 적합한 30~40대 여성 10명의 시험대상자에게 4주간 주3회 하이드로겔 마스크 팩을 적용하고 수분, 유분, 피부 톤을 측정하였다. 그 결과 피부 수분량은 1회 사용 후 11.3%, 4주 사용 후 58.36% 증가하였고, 유분량은 1회 사용 후 67% 증가 후 일정 값을 유지하고 더 이상 증가하지 않았다. 피부 톤은 4주 사용 후 좌우 뺨 모두 피부 톤이 밝아졌고 사용감 및 체감효능 평가는 87.6% 이상의 긍정적인 답변을 보였다. 이상의 결과로 하이드로겔 마스크 팩은 피부개선에 도움을 주는 우수한 소재로 판단된다.

• 한국의류학회지
• /
• 제45권5호
• /
• pp.825-839
• /
• 2021

This study aims to develop jacquard fashion masks using traditional patterns and investigates the preference and emotions of consumers for them. Nine patterns were designed with the motifs of plum flower, turtle, and geometric patterns using an Adobe Illustrator program. After that, 20 kinds of jacquard fabrics were developed using those patterns, and prototype masks were made. Furthermore, data were collected using a survey of 231 adult consumers to understand the emotional images evoked by jacquard fashion masks with traditional patterns. The results of the research show that the emotional dimension derived from jacquard fashion masks with traditional patterns consists of seven factors: luxurious image, frugal image, feminine image, oriental image, sporty image, geometrical image, generous image. We found that consumers preferred the M6 with the plum flower pattern as the motif as the most preferred design, while M13 with the geometric pattern as the motif was the lowest preferred.