• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.498-503
• /
• 2019

Electric propulsion ships are gaining widespread interest in the marine industry owing to extreme air pollution concerns. Consequently, several studies are actively being conducted for improving the power quality. Various methods have been developed that incorporate passive filters, notch filters, and active filters for reducing the harmonic content in the input current of a conventional diode front end rectifier. Among such filters, the active front end (AFE) rectifier is considered as an excellent technology. In this paper, current control for an AFE rectifier employing space vector PWM (Pulse Width Modulation) is proposed. Conventional current control methods for the AFE rectifier, hysteresis, SPWM (Sinusoidal Pulse Width Modulation), and SVPWM (Space Vector Pulse Width Modulation) were simulated by employing the PSIM software tool for analysis and comparisons. The results corroborate that SVPWM has the simplest structure and provides the best performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.346-353
• /
• 2022

Recently, studies on the integrity of rotating machines, such as gantry cranes, which are used in the shipbuilding industry, have been actively conducted. Gantry cranes are driven at relatively low revolutions per minute (RPM), are frequently operated and stopped, and are impacted by external environmental factors, such as shock and noise in the measurement data. The purpose of this study was to construct a replica of a gantry crane hoist used in indoor shipbuilding and analyze the acquired data for errors caused by the shift in operating conditions (RPM) and the change in the position of the data acquisition sensor. Consequently, we observed that the error caused by differences in sensor positions did not occur significantly under low operating conditions but occurred significantly under relatively high operating conditions. Thus, we determined that both the operating condition and position of the acquisition sensor affected the data acquired by the rotary machine.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.106-119
• /
• 2023

Due to global decarbonization movement and tightening of maritime emissions restrictions, the shipping industry is going to switch to alternative fuels. Among candidates of alternative fuel, methanol is promising for decreasing SOx and CO2 emissions, resulting in minimum climate change and meeting the goal of green shipping. In this study, a novel combined system of direct methanol solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), gas turbine (GT), and organic Rankine cycle (ORC) targeted for marine vessels was proposed. The SOFC is the main power generator of the system, whereas the GT and PEMFC could recover waste heat from the SOFC to generate useful power and increase waste heat utilizing efficiency of the system. Thermodynamics model of the combined system and each component were established and analyzed. Energy and exergy efficiencies of subsystems and the entire system were estimated with participation of the first and second laws of thermodynamics. The energy and exergy efficiencies of the overall multigeneration system were estimated to be 76.2% and 30.3%, respectively. The combination of GT and PEMFC increased the energy efficiency by 18.91% compared to the SOFC stand-alone system. By changing the methanol distribution ratio from 0.05 to 0.4, energy and exergy efficiencies decreased by 15.49% and 5.41%, respectively. During the starting up and maneuvering period of vessels, a quick response from the power supply system and propulsion plant is necessary. Utilization of PEMFC coupled with SOFC has remarkable meaning and benefits.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.267-268
• /
• 2022

Jeju coastal waters are limited to high-risk areas due to the passage of international cruise ships, passenger ships, with a large number of people and fishing boats, or to the jeju port and the jeju civilian-military combined port and near by seas, so a VTS system will be established along jeju and seogwipo coast. There is no accurate standard for determining the number of people required by the maritime traffic control center. Therefore, this study calculated the required operating personnel for control seats on the coast of jeju and seogwipo by using VTS big data to efficiently calculate the workload of maritime traffic control. It is judged that this study can be used basic data for research that sets the standard for calculating the control workload.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.267-275
• /
• 2023

The digital transformation of the shipbuilding, shipping, and logistics sectors is predicted to lead to the introduction of autonomous ships and changes in the way ships are operated. The co-existence of various operation forms, such as autonomous operation and remote operation, with the existing operation methods is expected to lead to the transformation of the ship operation process and the emergence of new stakeholders. This paper studies the future ship operation process according to the change in ship operation method, predicts the change in the operating environment of future ships, and derives functional requirements by major tasks and stakeholders. The Delphi technique is applied to construct a ship operation scenario from the planning stage of voyage and cargo transport to the stage of arrival at the final destination port and discharge of cargo, and to predict future work changes by task and actor. Seafarers' activities are expected to be minimised by remote and autonomous operation, and experts in each field are expected to have responsibilities and tasks in different aspects of ship operation.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.345-351
• /
• 2016

This study presents a system dynamics methodology to evaluate quantitatively the effect of the Korean government's development policy, such as tax reductions, on the industrial economy. System dynamics is often perceived as an optimized means to identify the dynamic inter-relationships among various factors of development policies, and in particular the industrial characteristics and uncertainties of the coastal shipping industry. The results of simulations used in this study shows that the impact of development policies such as tax reductions would increase shipping demand for about 4 years, and that tax incentives could raise the demand volume for cabotage cargo from 5.26 to 11.11%, through the available freight-down by 90~95% points. The system dynamics approach used in this paper represents an initial attempt to use this methodology in studies of the coastal shipping industry. On the basis of our simulations, the industrial effects of other development policies, such as ship financing support, investment of social overhead, or crew supply, could also be analyzed effectively. Additionally, it should be possible to extend these results by developing a comprehensive model encompassing these various analyses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.512-518
• /
• 2011

The marine equipment industry in Korea has been growing along with shipbuilding industry since early 1980s. Major shipbuilding might be predicted to shift to China in the near future. Moreover, new paradigm of e-navigation is about to get geared in the real world, which was specifically noted by IMO (International Maritime Organization). In order to catch up with rapid changes in the environments, the industry sector should move fast, the public sector should setup proper measures, and the academic sector should spur the research and development of new technologies. In this paper, international marin equipment markets and standardization trends are presented along with several representative R&D activities.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.114-118
• /
• 2006

Recently, work-related musculoskeletal disorders(WMSDs) is one of the major issues in the shipbuilding industry. The number of injured workers has rapidly increased and demands for workers compensation, improvement of work condition and environment to prevent WMSDs become larger. To protect and reduce WMSDs in the shipbuilding industry, simulation technique which showed it's ability of increasing the manufacturing productivity will be applied, because simulation technique has the evaluation ability for a worker's danger level of production process by human activity analysis. In our research, we modeled worker's attitude and simulated worker's action. We evaluated the caution level, compared and analyzed the difference point of digital human which made on computer and actual worker's attitude to check feasibility of human modeling and simulation in the shipbuilding industry.

• The Journal of Fisheries Business Administration
• /
• v.53 no.3
• /
• pp.65-83
• /
• 2022

In addition to simply providing quality food to the people, the fishery industry must be maintained and developed because it has various functions such as national food security, preservation of natural scenery, protection of national territory, and revitalization of the local economy. However, risk factors such as climate changes and environmental destruction have raised concerns about the sustainable development of the industry. Since these risk factors are becoming larger and more complex over time, it is time to conduct research related to the risk of the fishery industry. Therefore, the purpose of this study is to explore the risk factors facing the fisheries at this point, to analyze the economic ripple effect of regional fishery product supply shortage, and to draw implications. As a result of this study, the economic ripple effect of fishery product shortage per won was highest in Busan, followed by Gangwon, Gyeongnam, and Gyeongbuk. Considering the size of the local fishery industry, Busan had the highest supply shortage per 1% of local fisheries production. It is also necessary to prepare special risk management and countermeasures for these regions since the effect of supply shortage in regions such as Jeonnam, Gyeongnam, and Jeju is large compared to other regions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.275-285
• /
• 2021

COVID-19 is threatening the safety of ships and seafarers by delaying seafarer rotation. Shipping companies and governments have a blindspot in case of the onboard environment of seafarers. An effective, alternative plan should be devised to eliminate the possibility of human accidents in an emergency that threatens the safety of seafarers. According to the survey of former and current seafarers, the most important factor in boarding life was safety, and the most necessary thing during emergencies was to secure smooth seafarer rotation rather than improve wages and welfare. By analyzing the major routes of national shipping companies by continent, ports with a large number of calls and a high Air Connectivity Index were selected as the base port. In addition, the route was designed for effective, domestic seafarer rotation during international shipping. Other countries must be consulted to establish a travel route linking ships, ports, and airports for the safe return of sailors to their home countries during an emergency. In addition, it is necessary to work together for the seafarers who are in trouble of seafarer rotation through cooperation with the International Maritime Organization(IMO). Starting with this, the government should have a monitoring system for the return and non-return routes as well as the number of seafarers on board. If such a system is established, it will be able to determine the response direction of our country's policy in case of an emergency. Along with the shipping company's ef orts to improve the treatment of seafarers, national and social attention will be needed to review domestic laws and improve awareness about seafarers.