• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.79-84
• /
• 2013

The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.68
• /
• pp.23-42
• /
• 2015

According to the increasing attention to safety and security in maritime shipping, there are diverse security systems in international logistics activities. Although prior studies on maritime transport and port security reviewed security policy and practices in order to provide useful insights for strategic agenda, a few focused on attitude to respond it. Moreover, there are no prior study on a comparative study between continents. To tackle this, this paper compared confrontation attitude to maritime transport and port security between South Korea and European Union. Results identified that maritime shipping security incorporates container cargo security management, logistics security management, logistics security certificate system, and environmental impacts management caused by maritime shipping. Further, the comparison between two countries suggests that South Korea need to take more positive attitude to respond, such as investment in equipment and technologies for maritime shipping security, construction of comprehensive management system, political supports for logistics security, and training and education for safety and security. The results provide useful insights for strategic review of security systems in South Korea, and to help strategic agenda for future improvement.

• Journal of Navigation and Port Research
• /
• v.45 no.5
• /
• pp.231-237
• /
• 2021

Enhancing the performance of maritime wireless communication has been highlighted by the issue of cell planning in the sea area because of lack of an appropriate Propagation Loss Model (PLM). To resolve the cell planning issue in vast sea areas, it was essential to develop the (PLM) matching the intended sea area. However, there were considerable gaps between the prediction of legacy PLMs and field measurement in propagation loss and there was a need to develop the adjusted PLM (A-PLM). Therefore, cell planning was performed on this adjusted model, including modification of the base station's location, altitude, and antenna azimuth to meet the quality objectives. Furthermore, in order to verify the availability of the cell planning, Communication Service Quality Monitoring System (CS-QMS) was developed in the LTE-Maritime project to collect LTE signal quality information from the onboard equipment at regular intervals and to ensure that the service quality was high enough to satisfy the goals in each designated grid. As a result of verification, the success rate of RSRP was 95.7% for the intensive management zone (IMZ) and 96.4% for the interested zone (IZ), respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.421-427
• /
• 2015

This study aims at reviewing first the cases of marine accidents of small fishing vessels and vessels towing and being towed and, the problems concerning such lights and shapes that could be misunderstood for those in concerned Rules, or that could impair their distinctive characteristics or obstruct to keep a proper look-out. And then I wish to make a suggestion of the necessity of amending the National Laws which stipulate the rules for the ship's lights and shapes as follows; Firstly, by amending the "Standard of Construction and Equipment for the Less Than 10 Gross Tonnage of Small Fishing Vessels" small fishing vessel must be equipped with the lights and shapes that are the same as those of "vessel engaged in fishing" prescribed by Rule 26 of the "COLREG 1972" and Rule 84 of the "Maritime Safety Law Act". Secondly, "Standard of Fishing Vessels Equipment" which stipulate the rules concerning the exception of the running lights and radar reflector for the small fishing vessels must be amended to meet the requirement of Rule 20 of the "Maritime Safety Act". Thirdly, the definition of "Length of the tow" which prescribed by Rule 2 of the "Maritime Safety Act" must be amended to meet the Rule 24 of the "COLREG 1972". And also I wish to adhere to the importance of displaying the adequate vessel lights and shapes by every mariner for preventing marine accidents.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.85-91
• /
• 2011

Many protection methods such as surface coating, electric protection, or other methods have been applied to the numerous steel structures widely used in continental and marine areas to control their corrosion, which is done from an economic point of view. Most of these steel structures are primarily protected by coating methods. However, some steel piles under seawater are protected by the electric protection method, that is, either using an impressed current or a sacrificial anode method. Furthermore, environmental contamination may cause a severely corrosive environment, which, in turn, causes the accelerated corrosion of steel structures. Subsequently, coated steel structures could deteriorate more rapidly than the designed lifetime because of the acid rain caused by air pollution, etc. Therefore, a coating of marine paint exposed to seawater, that is, underwater hardening painting, is increasingly required to be fast drying as well as highly corrosion resistant. In this study, five types of underwater hardening paints were prepared with different resin series and additives. Their corrosion and water resistances were investigated using electrochemical methods such as corrosion potential, polarization curves, impedance and cyclic voltammogram measurements, etc. Even though it is generally accepted that the corrosion resistance of bare steel tends to increase with a shift of the corrosion potential in the noble direction, the corrosion resistance of a sample with a coating exhibited a relatively better tendency when it had a lower corrosion potential in this study. The corrosion current density was also decreased with a decrease in the diffusion limiting current density, which may mean that there is some relationship between corrosion and water resistance. The S sample of the ceramic resin series showed the relatively best corrosion and water resistance among those of samples, while the worst corrosion and water resistance were observed for the R sample of the epoxy resin series. The corrosion and water resistance of those samples tended to deteriorate with an increase in the immersion days, and their corrosion and water resistances were considered to be apparently improved by the types of resin and additives.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.133-133
• /
• 2018

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.34-35
• /
• 2017

Under the STCW Convention, marine engineers are required to have a satisfactory level of maritime English proficiency so that they can successfully perform their duties on board or maintain and operate the various equipment and facilities installed in the ship. More specifically, the importance of the engineers' written communication skills has been highlighted since their documents (for instance, post-work records, legal, and/or internal reports) have a significant legal impact in the event of a marine casualty or maritime crime. To suggest the necessity of developing standard engineering logbook phrases (SELP), therefore, this paper will closely analyse three-month authentic marine engineers' work records written by Korean officers. From the analysis, the problems and errors in the logbook will be analysed, and considerations to be taken into account in the development of SELP will be illustrated. Finally, the future actions for this standardised written communication for the logbook entry will be sought.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1206-1208
• /
• 2000

The Static var compensators(SVC) are intensively studied to realize high performance power equipment for electric power systems. Rapid and continuous reactive compensation by the SVC contributes to voltage stabilization, power oscillation damping, overvoltage suppression, minimization of transmission losses and so on. In this paper, instantaneous power vector theory which can expresses the instantaneous apparent power vector is proposed to control reactive power. The validity of the proposed method is confirmed by simulation studies.

• Annual Conference of KIPS
• /
• 2024.10a
• /
• pp.608-611
• /
• 2024

A robust and efficient communication network is crucial for ensuring the smooth operation, efficiency, and utmost safety of various maritime activities. Throughout the vast expanse of history, the highly significant maritime industry has heavily relied upon an extensive range of diverse communication methods. Accurate network performance is critical in maritime environments, where data loss due to signal interruptions, equipment failures, and other domain-specific factors frequently occur. This paper evaluates traditional and advanced data imputation techniques to assess their impact on the predictive accuracy of machine learning models used for network switching decisions in maritime settings. Results show that advanced deep learning techniques, like Autoencoder-based imputation can improve performance over traditional methods.