• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.69-75
• /
• 2023

Finite field arithmetic operations play an important role in a variety of applications, including modern cryptography and error correction codes. In this paper, we propose an efficient multiplication algorithm over finite fields using the Montgomery multiplication algorithm. Existing multipliers can be implemented using AND and XOR gates, but in order to reduce time and space complexity, we propose an algorithm using NAND and NOR gates. Also, based on the proposed algorithm, an efficient semi-systolic finite field multiplier with low space and low latency is proposed. The proposed multiplier has a lower area-time complexity than the existing multipliers. Compared to existing structures, the proposed multiplier over finite fields reduces space-time complexity by about 71%, 66%, and 33% compared to the multipliers of Chiou et al., Huang et al., and Kim-Jeon. As a result, our multiplier is proper for VLSI and can be successfully implemented as an essential module for various applications.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.2
• /
• pp.108-116
• /
• 2022

Accurately predicting wartime resources requirements and preparing war supplies in peacetime is an important task that can determine the outcome of the war by guaranteeing the duration of the operation. The wartime warship damage rate is a measure of estimating the battle damage of our warships in the process of performing battles to achieve the war goal. In the previously studied wartime warship damage rate estimation method, when damage occurs, long-term repair is required due to the complexity and specificity of the ship structure. Only the case of a complete defeat at the level of sinking was defined as a damage, and even if it was impossible to perform a maritime operation mission, it was not estimated as a damage if the level of sinking was not reached. Therefore, in order to improve the reliability of the wartime warship damage rate, the equipment damage assessment level can be estimated based on the warhead weight of the threat weapon system, the vulnerability rate of the warship's equipment, and the warship's hull. In the future, it is expected that the estimation methodology proposed in this study will be used as a simulation logic when developing a model for analyzing the wartime resources requirements for the warship's equipment and hull.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1060-1070
• /
• 2022

With the development of information technology, the size of the system has become larger and diversified, and the existing role-based access control has faced limitations. Blockchain technology is being used in various fields by presenting new solutions to existing security vulnerabilities. This paper suggests efficient role-based access control in a blockchain where the required gas and processing time vary depending on the access frequency and capacity of the storage. The proposed method redefines the role of reusable units, introduces a hierarchical structure that can efficiently reflect dynamic states to enhance efficiency and scalability, and includes user-centered authentication functions to enable cryptocurrency linkage. The proposed model was theoretically verified using Markov chain, implemented in Ethereum private network, and compared experiments on representative functions were conducted to verify the time and gas efficiency required for user addition and transaction registration. Based on this in the future, structural expansion and experiments are required in consideration of exception situations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.391-398
• /
• 2022

The use rate of M-pass(transportation card for foreigners),developed and sold to provide convenience to foreign tourists, was only 0.0051 % of visitors to Seoul over the past five years. Even this poor sales fell to the 0.024 % level in 2020 due to COVID-19. The cause of the sluggish performance was that the Ministry of land, Transport and Maritime Affairs and the card issuer excluded transportation operating organizations, and problems such as poor public relation, irrationality in pricing, and limitied number of sales locations appeared. In order to solve this problem, the research result showed that business strategies such as the establishment of a digital marketing system, realistic pricing, and the establishment of a mobile sales system that fit the trend, as well as the development of new product that reflect the participation and opinions of all related organizations are necessary. It is expected that this study will not only provide convenience to foreign Seoul tourist in the age of Post Corona, but also help improve the management of subway operating organizations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.692-699
• /
• 2022

The fishing village new-deal 300 project covers 300 fishing villages and ports for integrated development including reforming backward facilities and utilizing regionally indigenous resources for specialized programs. An analysis was conducted to decide selection factors in the fishing village new-deal 300 project through the expert interview based on AHP(Analytic Hierarchy Process). The results of high-class appraisal items showed that the weights were ranked in the order of the development conditions and basic plan, project effects, project plan, and project execution and management. The project effect obtained 15.57 point in the AHP analysis, whereas the guideline stipulated the point as 6 point for the project effect item, The derived weights for each appraisal item in this study will hereafter be referred in determining the assessment points for the fishing village and port development projects.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.337-345
• /
• 2022

The foundation of high-rise concrete building in coastal areas generally must be installed in an integrated manner, not separately, in order to prevent defects caused by stress on the upper and lower parts of the mounting surface and to manage the process smoothly. However, when performing integrated punching, there is a concern that temperature stress cracks may occur due to hydration heat. Due to the large member size, it is difficult to make a sufficient commitment, so it is necessary to mix concrete with high self-charging properties to ensure workability. In this research, the amount of high-performance spray and admixture used was adjusted as experimental variables to satisfy this required performance. Through the analysis of the results for each blending variable, it was found that the unit quantity was 155kg/m³ and the cement ratio in the binder was 18%, and the target values of the pre-concrete properties and compressive strength were satisfied. A four-component binder(18% cement, 50% slag fine powder, 27% fly ash, 5% silica fume) was used.

• Journal of Internet Computing and Services
• /
• v.24 no.4
• /
• pp.93-105
• /
• 2023

In order to transform the traditional aquaculture industry, which is dependent on experience, labor-intensive and natural environment, into future intelligent smart aquaculture, digital aquaculture improves aquaculture reproducibility and efficiency of production process through digitization of the aquaculture industry based on ICT equipments, Data analysis and utilization for promoted to increase the acceptability of aquaculturist. Europe's advanced fisheries countries have achieved rapid growth not only in aquaculture technology but also in the aquaculture equipment industry through digitization that combines information and communication technology with aquaculture farms. However, it is not possible to collect aquacultural data in Korea because it has not secured a Korean aquaculture industry for multi-variety, small-scale production and aquaculturists' refusal of reception for digital transformation. Therefore, this study intends to suggest the development direction of digital aquaculture to convert to intelligent smart aquaculture in the future by analyzing trends and critical technology.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.261-263
• /
• 2023

Recently, universities of fisheries and institutions related to fisheries are actively carrying out a project to build new fisheries training ships. These new fisheries training ships are significantly larger in size and longer in length than the previous ships. In addition, these new ships basically have space that can accommodate more than 100 crew and passenger. On the other hand, they are excluded from IMO maneuverability evaluation since the size of these ships are still less than 100 m in length (LBP). These results have had an impact on the study of maneuverability of fishing vessels including the fisheries training ships. Against these backgrounds, the authors conducted a study to estimate the maneuvering characteristics of fisheries training ship Baek-Kyung according to depth in order to prepare a maneuvering characteristic index that enables the large fisheries training ships to navigate more safely using a modified empirical formula. It was confirmed that the maneuvering characteristics of Baek-Kyung changed significantly as the values of the hydrodynamic force coefficients changed as the water depth gradually decreased from around 1.5 (approx. 8 m in depth) of the ratio of the water depth to the ship draft. The results of this study will not only help navigators understand the maneuvering characteristics of Baek-Kyung, but also serve as an indicator when navigating in shallow water. In addition, the accumulation of these results will serve as a basis for future study on maneuverability of fishing vessel types.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.4
• /
• pp.367-373
• /
• 2022

We analyzed work safety risk factors, which are likely to occur during fishing in gillnet fishing vessels using the written verdict of the Korea Maritime Safety Tribunal from 2016 to 2020, and considered work safety management. Of the total of 37 fatal accidents, three cases in the East Sea, six cases in the South Sea, and 28 cases in the West Sea were very frequent. The accident rate per vessel by sea area (%) was 0.08% in East Sea, 0.12% in South Sea, and 0.40% in the West Sea. Based on the East Sea, the number of fatal accidents was 1.6 times higher in the South Sea and 5.4 times higher in the West Sea. Six cases (16.2%) occurred during departure and preparation for fishing in the fishing process, and all other 31 cases (83.8%) occurred during fishing operation. In the order of accident types, 21 cases (56.8%) of being struck by object, eight cases (21.6%) of contact with machinery and six cases (16.2%) of falls from height were found to be fatal accidents in gillnet fishery. Human factors, such as fishers' carelessness and negligent safety management by captain accounted for 27 cases (73.0%) of the main cause, and 35 cases (94.6%) of the secondary cause. In addition to human factors such as fisher's carelessness and negligent safety management by captain, mechanical factors, environmental factors and management factors must be improved together to reduce human casualties. These results are expected to be utilized as basic data for reducing safety accidents during the work of fishers.

• Composites Research
• /
• v.19 no.5
• /
• pp.12-19
• /
• 2006

In this paper, conceptual structural design of the main wing for a small scale WIG(Wing in Ground Effect) among high speed ship projects, which will be a high speed maritime transportation system for the next generation in Rep. of Korea, was performed. The Carbon/Epoxy material was selected for the major structure, and the skin-spar with a foam sandwich structural type was adopted for improvement of lightness and structural stability. As a design procedure for the present study, firstly the design load was estimated through the critical flight load case study, and then flanges of the front and rear spars from major bending loads and the skin and the spar webs from shear loads were preliminarily sized using the netting rule and the rule of mixture. Stress analysis was performed by a commercial FEA code, NASTRAN. From the stress analysis results for the first designed wing structure, it was confirmed that the upper skin between the front spar and the rear spar was unstable fer the buckling. Therefore in order to solve this problem, a middle spar and the foam sandwich type structure at the skin and the web were added. After design modification, the structural safety and stability for the final design feature was confirmed. In addition to this, the insert bolt type structure with eight high strength bolts to fix the wing structure to the fuselage was adopted for easy assembly and removal as well as in consideration of more than 20 years fatigue life.