• 제목/요약/키워드: Maritime

검색결과 12,076건 처리시간 0.035초

Architecture Design for Maritime Centimeter-Level GNSS Augmentation Service and Initial Experimental Results on Testbed Network

  • Kim, Gimin;Jeon, TaeHyeong;Song, Jaeyoung;Park, Sul Gee;Park, Sang Hyun
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권4호
    • /
    • pp.269-277
    • /
    • 2022
  • In this paper, we overview the system development status of the national maritime precise point positioning-real-time kinematic (PPP-RTK) service in Korea, also known as the Precise POsitioning and INTegrity monitoring (POINT) system. The development of the POINT service began in 2020, and the open service is scheduled to start in 2025. The architecture of the POINT system is composed of three provider-side facilities-a reference station, monitoring station, and central control station-and one user-side receiver platform. Here, we propose the detailed functionality of each component considering unidirectional broadcasting of augmentation data. To meet the centimeter-level user positioning accuracy in maritime coverage, new reference stations were installed. Each reference station operates with a dual receiver and dual antenna to reduce the risk of malfunctioning, which can deteriorate the availability of the POINT service. The initial experimental results of a testbed from corrections generated from the testbed network, including newly installed reference stations, are presented. The results show that the horizontal and vertical accuracies satisfy 2.63 cm and 5.77 cm, respectively. For the purpose of (near) real-time broadcasting of POINT correction data, we designed a correction message format including satellite orbit, satellite clock, satellite signal bias, ionospheric delay, tropospheric delay, and coordinate transformation parameters. The (near) real-time experimental setup utilizing (near) real-time processing of testbed network data and the designed message format are proposed for future testing and verification of the system.

Application of a Dynamic Positioning System to a Maritime Autonomous Surface Ship (MASS)

  • Kim, Jeong-Min;Park, Hye Ri
    • 한국항해항만학회지
    • /
    • 제46권5호
    • /
    • pp.435-440
    • /
    • 2022
  • The development and introduction of a Maritime Autonomous Surface Ship (MASS) are some of the most important changes leading to the fourth industrial era in the maritime area. The term 'MASS' refers to a ship operating independently, without human intervention, to reduce maritime accidents caused by human errors. Recent UK findings MASS also noted that particularly the dynamic positioning system will be considered to apply as newly function to a MASS. The DP system, a ship system developed decades ago and used for specific purposes like offshore operations, provides various functions to facilitate the accurate movements of the vessel, and operators can make decisions within the DP system, in addition to the ordinary ship system. In this paper, it would like to present the connection and application method with the main technical elements of the DP system in connection with the main technology of the DP system to achieve the safe operation of a MASS. In particular, among various position reference systems, the capability plot function of DP system, and the "follow target" mode in the operation mode are attractive functions that can contribute to the safe operation of autonomous ships.

Compression of the Variables Classifying Domestic Marine Accident Data

  • Park, Deuk-Jin;Yang, Hyeong-Sun;Yim, Jeong-Bin
    • 한국항해항만학회지
    • /
    • 제46권2호
    • /
    • pp.92-98
    • /
    • 2022
  • Maritime accidents result in enormous economic loss and loss of life; thus, such accidents must be prevented, and risks must be managed to prevent these occurrences Risk management must be based on statistical evidence such as variables. Because calculating when variables increase statistically can be difficult, compressing the designated variables is necessary to use the maritime accident data in Korea. Thus, in this study, variables of marine accident data are compressed using statistical methods. The date, ship type, and marine accident type included in all maritime accident data were extracted, the number of optimal variables was confirmed using the hierarchical clustering analysis method, and the data were compressed. For the compressed variables, the validity of the data use was statistically confirmed using analysis of variance, and the data of the variables identified using the variable compression method were designated. Consequently, among the monthly and yearly data, statistical significance was confirmed in yearly data, and compression was possible. The significance of the data was confirmed in six and eight types of ships and accidents, respectively, and these were compressed. These results can be directly used for prevention or prediction based on past maritime accident data. Additionally, the data range extracted from past maritime accidents and the number of applicable data will be studied in the future.

플러그인 프레임워크 환경에서의 XML 기반 객체 모델 명세서 검증 도구 설계 (The Design of the Verification Tool of the XML based Object Model Description based on Plug-in Framework)

  • 유한결;이용헌;심준용;김세환
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2011년도 춘계학술발표대회
    • /
    • pp.1466-1469
    • /
    • 2011
  • 플러그인 프레임워크는 기존 M&S 프레임워크에서의 문제점인 구성요소 간 높은 종속관계 및 낮은 유연성을 해결하고자 개발된 프레임워크 설계 방식으로, 프레임워크를 구성하는 컴포넌트를 플러그인으로 제공하여 구성요소의 추가 및 변경이 동적으로 이루어질 수 있게 한다. 또한 플러그인 컴포넌트간 통신을 위한 메시지 구조 정의가 실행 시점에 동적으로 결정되어, 컴포넌트 간 상호 독립적인 인터페이스를 보장해준다. 하지만, 플러그인 컴포넌트들의 조합이 이뤄진 상태에서 전체적인 메시지 연결 흐름이 원활하기 위해서는 각 컴포넌트에서 개별적으로 작성된 인터페이스에 대한 검증이 사전에 이뤄줘야 한다. 이에 본 논문에서는 XML 기반으로 작성된 객체 모델 명세서에 대한 무결성과 중복성을 검증할 수 있는 객체 모델 명세서 검증 도구에 대해 제안하고 이에 대한 설계내용을 설명하도록 한다.

Characterization of GaN on GaN LED by HVPE method

  • Jung, Se-Gyo;Jeon, Hunsoo;Lee, Gang Seok;Bae, Seon Min;Kim, Kyoung Hwa;Yi, Sam Nyung;Yang, Min;Ahn, Hyung Soo;Yu, Young Moon;Kim, Suck-Whan;Cheon, Seong Hak;Ha, Hong Ju;Sawaki, Nobuhiko
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc1호
    • /
    • pp.128-131
    • /
    • 2012
  • The selective area growth light emitting diode on GaN substrate was grown using mixed-source HVPE method with multi-sliding boat system. The GaN substrate was grown using mixed-source HVPE system. Te-doped AlGaN/AlGaN/Mg-doped AlGaN/Mg-doped GaN multi-layers were grown on the GaN substrate. The appearance of epi-layers and the thickness of the DH was evaluated by SEM measurement. The DH metallization was performed by e-beam evaporator. n-type metal and p-type metal were evaporated Ti/Al and Ni/Au, respectively. At the I-V measurement, the turn-on voltage is 3 V and the differential resistance is 13 Ω. It was found that the SAG-LED grown on GaN substrate using mixed-source HVPE method with multi-sliding boat system could be applied for developing high quality LEDs.

Fabrication of AlGaN-based vertical light-emitting diodes

  • Bae, Seon Min;Jeon, Hunsoo;Lee, Gang Seok;Jung, Se-Gyo;Kim, Kyoung Hwa;Yi, Sam Nyung;Yang, Min;Ahn, Hyung Soo;Yu, Young Moon;Kim, Suck-Whan;Cheon, Seong Hak;Ha, Hong-Ju;Sawaki, Nobuhiko
    • Journal of Ceramic Processing Research
    • /
    • 제13권spc1호
    • /
    • pp.75-77
    • /
    • 2012
  • The AlGaN-based vertical light-emitting diodes (LEDs) on thick GaN epilayer were fabricated by a hydride vapor phase epitaxy with multi sliding boat system. The optical and electrical characteristics of AlGaN-based vertical LEDs were evaluated using a scanning electron microscopy, electroluminescence and I-V measurements. The AlGaN-based vertical LEDs structure has hexagonal symmetry, 500 ㎛ in diameter and above 67 ㎛ in growth thickness. At the room-temperature, the broaded strong peak and relatively high intensity peak were gradually measured at 405 nm with increasing injection current. And a forward operator voltage was measured to be about 7.5 V.

AIS 데이터를 활용한 부산항 인근 선박통항패턴 분석 (Analysis of vessel traffic patterns near Busan Port using AIS data)

  • 이형탁;최혜민;이정석;양현;조익순
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 춘계학술대회
    • /
    • pp.155-156
    • /
    • 2022
  • 선박을 효율적으로 운항하면 화물을 항구까지 더 안전하고 빠르게 운송할 수 있으며, 연료비용을 절감할 수 있다. 따라서 본 연구에서는 우리나라의 대표적인 항만인 부산항 인근을 통항한 선박의 AIS 데이터를 활용하여 그 패턴을 분석하였다. 선박통항패턴 분석은 그리드 기반의 노드 생성 방식으로 접근하였으며, 이를 통해 최적항로 및 경로 예측 등의 연구로 활용할 수 있다.

  • PDF

국적외항상선의 해기사 수급 현황 (The Supply-Demand Situation of Officers for Korean flag ocean-going merchant ship)

  • 김현종;정대득
    • 한국항해항만학회지
    • /
    • 제32권1호
    • /
    • pp.89-95
    • /
    • 2008
  • 외국인선원 고용 확대의 주된 요인으로 주장되고 있는 선원의 부족문제, 그 중에서도 국적외항상선의 해기사의 수급현황을 객관적인 자료에 기초하여 분석함으로써 외국인 해기사의 고용범위 조정에 대한 합리적인 근거를 제시하였다. 우리나라 해기사의 수급현황을 분석하기 위하여, 3 4급 해기사의 신규양성 공급 상황을 조사하였고, 해기사의 취업 및 이직현황을 조사하였다. 또한 국적외항상선 척수의 증감상황을 조사하여 선복량의 증가에 따른 해기사의 신규수요 현황도 조사하는 등 여러 요인을 고려한 해기사의 수급현황을 분석하였다. 그 결과 국적외항상선에 공급되는 해기사는 매년 64명 정도가 남아도는 것으로 파악되었다.

양식어장 보호를 위한 레이더 감시시스템의 구축방안에 관한 연구 (Radar Surveillance System for Protecting Aquaculture Farms)

  • 정중식;김철승;박성현;김우숙;안영섭
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 추계학술대회
    • /
    • pp.103-109
    • /
    • 2004
  • 국민소득 증가에 따라 고급해산물의 수요가 늘어나고 있으며, 어패류 및 해조류를 포함하는 양식어업은 국내어업에 대한 총수입 중 $50.6\%$를 차지하고 있는 어가의 주 소득원 중의 하나이다. 최근 국내어장에서 불규칙하게 발생하는 어패류 도난사건의 피해액은 매년 건당 수십만에서 수천만원 이상으로 증가하고 있는 설정이다. 본 연구에서는 국내 영세어가에 적용할 수 있는 양식어장 보호를 위한 레이더 감시 시스템의 모델을 제안하고, 감사시스템의 구성요소별 소요기술을 분류하고, 구축방안 및 기술개발 내용을 제시하였다. 국외에서 양식어장보호 감시시스템이 개발된 바가 있지만 구축비용이 고가이므로 국내 영세어가에 적용하기에는 어렵다.

  • PDF

해양경계획정제도에 대한 중국의 입장과 통킹만 사례고찰 (Maritime Boundary Delimitation Regime for the Gulf of Tonkin Dispute and China's Position)

  • 양희철;박성욱;권문상
    • Ocean and Polar Research
    • /
    • 제26권4호
    • /
    • pp.669-678
    • /
    • 2004
  • Coastal states are adopting maritime boundary delimitation as their primary maritime policy because maritime jurisdiction directly relates to vast economic interest. This becomes specially important and sensitive when complex maritime boundary issues are involved between neighboring coastal states. China has not actively carried out nor declared maritime boundary delimitation until recently with any country except Agreement between China and Viet Nam on the demarcation of the territorial water, the exclusive economic zones and the continental shelf of China and Vet Nam in the Gulf of Tonkin on 25 December 2000 (hereinafter, the Gulf of Tonkin Agreement). The principles that governs maritime boundary delimitation are to consider primarily an agreement between States concerned, however, if no agreement can be reached, all relevant circumstances are considered to achieve an equity between concerned States. Relevant circumstances are length of coastline, form of coastline, existence and position of island or islands, speciality of geology/topography, and factor of economy and deffnce. Factors which sinologists are considering in regard to continental shelf delimitation of the Yellow Sea are as follows; i) geographical factor, ii) geological factor, iii) topographical factor, iv) environment and ecological (factor, v) historic interest, and vi) social and economic interest. The 'Gulf of Tonkin Agreement' is completed by basically applying the principle of delimitation according to median line which seems that China has adopted the maritime boundary delimitation principle of 'half and half' which was the intention of chinese government. At the same time, China recognized Viet Nam's dominion and sovereign right over the partial exclusive economic zone and the continental shelf of Dao Bach Long Vi in Gulf of Tonkin. This case can be considered as an example of mutual concession or compromise in delimiting maritime boundary for states of concerned.