• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.878-887
• /
• 2011

With current economic advancements and increasing demand for well-being, diverse leisure cultures have developed. The geographic feature of being surrounded in 3 sides by water has resulted in the sustained growth of the marine leisure market. But the increased market and users has not resulted in the systematic management of sailing safety and equipment. Marine leisure activities occur on water, so the damage from collisions and distress calls are greater than land based leisure activities. And marine leisure equipment is very expensive, requiring systematic management. This research proposes an information system using a new IP-RFID technique to manage the safety of marine leisure users and equipment management.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.619-626
• /
• 2016

This paper proposes the design and performance evaluation of a marine engine fault detection system using a proximity sensor for marine engine. Non-linearity is greatly reduced by using the sensor without increasing the response time by applying the CANopen protocol. The CANopen protocol enables the sensor to send initial values and measurement data. The marine engine fault detection system measures crankshaft deflection and the bottom dead center of the crosshead in real-time, which maintains stability and prevents the serious breakdown of the marine engine by use of an interlocking alarm monitoring system.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.463-469
• /
• 2015

Fatigue in the metal used as hull material has always been an important issue. The fatigue phenomenongenerally occurs suddenly in a ship hull, and always causesa large number of casualties and economic losses. This paper presents a study of an assessment method for the fatigue life based on Li’s approach using MSC Fatigue. The details of Li’s approach based on MSC Fatigue are provided. Based on the results of this study, it can be concluded that Li’s approach has several advantages: (1) it allows the wide application of different structural details, (2) is easy to use, and (3) provides accurate results. Finally, Li’s approach can be proven to be feasible for a ship’s fatigue analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.568-573
• /
• 2009

Marine accidents have always caused huge economic losses, as well as environmental pollution. Prevention of marine accidents has become a focus of argumentation. The analysis of past accident cases, reviewing the experience and lessons, is important and necessary for preventing marine accidents. With the same subject above, the Korean Maritime Safety Tribunal provides for past marine accidents' written judgments and analysis of judgment and associated retrieval system on its homepage. In these systems, the name of the ship, accident occurrence time, accident pattern or related keywords are used as search conditions. However, most of the marine events' happening were not due to a single reason, but multiple ones. In addition, one marine event could often come under several categories. In this case, now the retrieval systems' DB is used on the Korean Maritime Safety Tribunal homepage was built based on single category and failed to be able to retrieve according to multiple reasons or multiple categories. In order to solve this problem, a more practical retrieval approach might be needed. Therefore, in this paper, a new retrieval system will be proposed, which using the linguistic label to describe the cluster after analyzing the relational properties between marine accidents and clustering by FCM algorithm, and then adding an interface to allow users to get the results they want through choosing multiple reasons or multiple categories.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.286-294
• /
• 2016

In the initial design stage, the geometry of systems needs to be optimized regarding its performance. However, performance analysis is very time-consuming. Therefore, optimization becomes difficult/impossible problems because we need to evaluate the system performance for alternative design cases. To overcome this problem, many researchers perform prediction of system performance using the approximation model. The response surface method (RSM) is typically used to predict the system performance in the various research fields, but it presents prediction errors for highly nonlinear systems. The major objective of this paper is to propose a proper prediction method for marine system problems. Case studies of marine systems (the substructure of a floating offshore wind turbine considering hydrodynamic performance and bulk carrier bottom stiffened panels considering structure performance) verify that the proposed method is applicable to performance prediction in marine systems.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.193-202
• /
• 2005

Marine risk assessment considers events such as collision/grounding, sinking/capsize, fire/explosion and flooding, developing relationships between their causes and effects. In addition, risk assessment of previously sunken ships are also necessary since they continuously have possibility for further oil spill or can cause other marine accidents. The objective of this paper is to develop the risk assessment systems for sunken ships to prevent oil spill and further marine causalities in order to preserve safe and clean oceans around Korea peninsula. The risk assessment systems for sunken ships comprise of database management sub-system for sunken ships, qualitative risk assessment sub-system, quantitative risk assessment sub-system, and cost-benefit analysis subsystem.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.328-336
• /
• 1998

Marine reduction gears are usually used to increase the propulsion efficiency of propellers for ships powered by medium and small sized high speed diesel engines. Most of shaft systems adopt flexible couplings to absorb the transmitted vibratory torque from the engines to the reduction gears and to prevent the chattering phenomenon of reduction gears. However some elastic couplings show non-linear characteristics due to the variable torque transmitted from the main engines and the change of ambient temperature. In this study dynamic characteristics of flexible couplings sare investigated and their effects upon various vibratory conditions of propulsion systems are clarified. A calculation program of torsional vibration for the propulsion systems are clarified. A calculation program of Results of the program developed are compared with ones of the existing linear method and propulsion systems with the elastic couplings the transfer matrix method is adopted which is found to give satisfied results.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

This paper - following 'Development of multi-purpose marine waste cleaning systems for the shallow waters (Part I : preliminary conceptual design)'- describes on the system development and the sea trial performance evaluation(Cho[2003]). The multi-functional seabed waste collecting system and the towing hook system were developed. The maximum working depth of these systems are 15 and 100 meters, respectively(MOMAF[2001]). For the multi-purpose use to collect the marine waste, this system contains floating waste collecting device for the waste on seawater and remained waste collecting device for the waste on seabed, while steel wire cutting system is added for higher efficiency In order to evaluate the system performance, the prototype of multi-functional system was constructed and the sea trial test at shallow water were carried out. As a result, this system operated well with safe and without any interaction so that the developed systems are practicable and applicable.

• Journal of Information Technology Services
• /
• v.12 no.1
• /
• pp.189-199
• /
• 2013

As many organizations have adopted and implemented ERP systems, concerns about ERP performance also have increased. Former researches studied the ERP implementation of general large or medium size enterprises but there are not enough studies on ERP systems of a specific industry domain. In this paper, we introduce a case study on ERP adoption methodology of global leading company 'D' in shipbuilding and marine engineering industry. We examined ERP implementation background, method and scope and evaluated ERP performance in perspective of both quantitative and qualitative approaches. Quantitative research usually examines ERP performance based on financial statements and qualitative study typically examines organization change or improvement. As a result, ERP implementation in shipbuilding and marine industry can improve quantitative aspects such as cost, human resource and organization performance. As qualitative analysis, business process and tools can be unified and management transparency can be improved by ERP implementation. The result of this paper will be useful guideline for organizations which are considering ERP systems.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.7-14
• /
• 2005

As the numbers cf vessels in and out cf korean ports and passing ships through korean waters are increasing, possibilities of marine accidents grow higher and damages caused by such accidents would be expected larger. The author accordingly try to seek for the appropriate measures to enhance the present korean Search and Rescue(SAR) systems and future plans comparing korean system with international movement and relevant systems of maritime advanced countries.