• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.518-521
• /
• 2016

Korea is surrounded on three sides by the sea, through the maritime transportation accounts for close to 90% share in the total cargo volume. In addition, there are amount of small and medium-sized fishing vessels registered. These days, a number of maritime accidents caused many casualties and having an adverse effect on the marine environment. Therefore, there is a need for a maritime traffic control has been increasing. Information about the ship is divided into AIS information for VTS, Port Management Information System (Port-MIS) operated by the Port and vessels pass (VPASS) that are installed on fishing. However, there is a problem that is not achieved the information exchanged between each other. That is, information on the vessel are stored in diverse inefficient in the management, operation and utilization. This paper discusses the ways to efficiently manage and integrate vessels information for VTS, and proposes the method for implementation and application.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.661-669
• /
• 2019

High frequency active sonar is appropriate for detecting small targets such as a diver in coast environment. In case of using high frequency active sonar in shallow coastal environment, a false alarm rate is high due to clutters caused by marine biological noise, ship noise, wake, etc. In this paper, we propose an algorithm for target detection which is robust against clutter in active sonar system in shallow coastal environment. The proposed algorithm increases the rate of reduction clutter using calculation of statistical characteristics of signal and a clustering method. The algorithm is evaluated and analysed with sea trial data, as a result, that shows the rate of reducing rate of clutter of 96 % and over.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.279-285
• /
• 2020

The study on the temporal and spatial monitoring of passing vessels is important in terms of protection and management the marine ecosystem in the coastal area. In this paper, we propose the automatic detection technique of passing vessel by utilizing an artificial intelligence technology and broadband striation patterns which are characteristic of broadband noise radiated by passing vessel. Acoustic measurements to collect underwater noise spectrum images and ship navigation information were conducted in the southern region of Jeju Island in South Korea for 12 days (2016.07.15-07.26). And the convolution neural network model is optimized through learning and validation processes based on the collected images. The automatic detection performance of passing vessel is evaluated by precision (0.936), recall (0.830), average precision (0.824), and accuracy (0.949). In conclusion, the possibility of the automatic detection technique of passing vessel is confirmed by using an artificial intelligence technology, and a future study is proposed from the results of this study.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.2
• /
• pp.78-88
• /
• 2009

In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a "plug-in" framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.5-10
• /
• 2012

In this study, carbon steel (A53) is used as the material for the pipes in a marine plant and ship industry. Welds are necessary to join the carbon steel, and the effect of this welding on the properties of the carbon steel has been studied by many researchers. In this study, the dynamic behavior of welded carbon steel was studied using an acoustic emission (AE) technique, which is a nondestructive test. There are numerous AE parameters that can be used to analyze the damage behavior of carbon steel by external loading. The AE parameters of energy, cumulative count, amplitude, and AE event were used, and each parameter was differentiated according to the degree of damage to the carbon steel. The energy showed a high level at the elastic range of the load curve, while the amplitude had the highest value at the hardening region. The cumulative count showed a growth tendency similar to the loading curve. In addition, an ultrasonic technique and hardness test were applied to evaluate the mechanical properties according to the base zone, HAZ region, and weld zone of the weld specimen. The velocity and attenuation ratio showed little change between zones, and an evaluation of the ultrasonic waves on each zone of the specimen was found to be a useful method to clarify the mechanical properties of the carbon steel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.299-305
• /
• 2017

Re-engineering is gaining attention due to severe environmental pollution and economic crisis. Although re-engineering in shipbuilding has been carried out steadily, technological advancements, domestic ship repair and maintenance industries are not as prevalent as shipbuilding industries. In order to solve this problems, laser cladding can significantly aid with technical development. Laser cladding produces an outstanding clad layer with minimal dilution and little porosity. In this study, prior to applying laser cladding to an exhaust valve face, the effects of various parameters that affect the characteristics of the 1 pass clad layer were investigated. When laser power was increased, the clad layer width became broader and the height was decreased. In addition, it was identified that the hardness of the clad layer was inversely proportional to the power, and the entire clad layer was diluted through an EDS chemical composition analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.67-70
• /
• 2005

As the demand of sea leisure increases recently, interest is converged sea safety and offer of quick and systematic information according to weather environment that change rapidly. Use of Electronic Navigational Chart(ENC) in the sea in offer of geography information through Mobile terminal was gone to level that run in PDA environment in domestic by bulky good physician data information and complicated processing way of island in the sea expression in sea, and is loaded in obligatory sailing equipment of ship yet and is used. In this paper, we develop server system that take charge index for offer of quick information through Restrictive resource management and Caching Technique, image conversion and database construction and fast search to service various marine leisure informations of Weather Data and so on and image information of ENC in the sea to Mobile portable phone terminal efficiently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.159-163
• /
• 2005

Marine accidents of 70.9% have been caused by small ships less than 100 tons in the past 5 years(1998${\sim}$2002). This is ascribable to the graying and lack in expertise on shipping of small ship operators, and merchant ships are hindered from coastal navigation due to the increase of coastal fishing boats and liners. Currently, ECDIS and GPS Plotters are widely used as navigation equipment providing route information to operators, but it can not give any function of automatic route creation and route explanation, so they are available only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. In this paper, Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind speed and direction of anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.75-80
• /
• 2006

ILO has contributed for seafarers to promote conditions of employment and decent work through maritime labour standards. Between 1920 and 1996, a total of 39 Conventions and 29 Recommendations concerning seafarers have been adopted, which demonstrates the import part of ILO activities devoted to seafarers' questions. But many instruments were outdated, deficient and not reflective of modern practice, many contained technical detail which discouraged ratification. the Governing Body of ILO, at its 262nd Session(March-April 1995), decided to set up a Working Party regarding the revision of maritime labour standards. This Working Party initiated its examination of maritime instruments to 273rd Session(November 1998) of the Governing Body. The review made by the Working Party has concluded that existing maritime Conventions were considered either up to date or were identified for promotion, most of which were approved by the Governing Body. Therefore, ILO started to create a single, coherent instrument embodying as far as possible all up-to-date standards of existing maritime labour convention. The Maritime Labour Convention 2006 has been adopted in February 2006. This paper aims to analyze the significance of this convention and the influence regarding to maritime labour affairs in the field of shipping industry.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.708-711
• /
• 2011

The Navy is in the process of developing a sonar-operation strategy to increase the effectiveness of underwater target seeking capability. HMS is the basic strategy to detect underwater targets. The advantages of HMS is that, it has a short preparation time to operate and can be always used regardless of sea conditions and weather. However, it is difficult to effectively detect underwater targets due to the interaction between marine environments and sonar-operations. During the research, the effectiveness of the HMS system's underwater target seeking capability was analyzed by integrating various search patterns and environment conditions into the simulation. In the simulation the ship target an evasive target within a set region. The simulation presented results for an effective searching methods of underwater targets. These research results can be used as foundation for advancing and improving the sonar operational tactics.