• 제목/요약/키워드: Marine ship

검색결과 3,348건 처리시간 0.03초

선박용 디젤엔진의 배기가스 열회수 시스템 (II) - R245fa 및 Water 의 작동유체에 대한 엑서지 분석 - (Exhaust-Gas Heat-Recovery System of Marine Diesel Engine (II) - Exergy Analysis for Working Fluids of R245fa and Water -)

  • 최병철;김영민
    • 대한기계학회논문집B
    • /
    • 제36권6호
    • /
    • pp.593-600
    • /
    • 2012
  • 대형 선박의 추진용 디젤엔진에서 버려지는 배기가스의 열을 회수하기 위한 랭킨사이클이 적용된 발전시스템에 대하여 R245fa 및 water의 작동유체에 따른 그 엑서지 특성을 분석하였다. 그 이론적인 계산 결과로, R245fa에 대하여 터빈입구의 압력이 증가할수록 엑서지 효율 및 시스템의 엑서지 효율이 증가하였고, 엑서지 파괴율은 주로 응축기 및 증발기에서 상대적으로 높게 나타났다. 그리고 질량유량의 증가에 따라 시스템의 엑서지 효율이 증가하는 특성을 보였다. Water의 경우에, 증발기에서의 엑서지 파괴율은 R245fa의 경우와 유사하게 나타났지만, 터빈입구의 압력 및 질량유량 비율의 변동에 대하여 열원에 대한 엑서지 손실률이 가장 큰 폭으로 변동하였다.

북극항로를 운항하기 위한 선결과제 (Some Items to be Resolved for Going through the Arctic Route)

  • 남청도;김정만
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2010년도 추계학술대회
    • /
    • pp.137-138
    • /
    • 2010
  • 최근 지구온난화 영향 등으로 인하여 북극해의 해빙이 가속화 되고 있어 북극항로의 상용화가 예상보다 빨라질 전망이다. 하절기 북극해의 얼음 면적은 1979년 위성관측이 개시된 이래 약 40%정도로 줄었다. 북극항로가 상업적으로 이용되기 위해서는 경제성 문제 이전에 북극항로 중 일부가 특정국가 배타적으로 사용하는 문제가 해결되어야 하며, 다음으로 선박운항 기술적 요인으로서 부빙들이 움직이고 있는 기후조건에 맞는 특수선박의 건조가 필요하며 또한 이들 선박을 북극해에서 운항할 수 있는 선원들의 교육 프로그램의 이수 외에도 관련 연안국과의 협력으로 국제적인 공인이 이루어져야 할 것이다. 그 밖에 북극항로 정보시스템개발에 대해서도 연구가 이루어져야 할 것이다.

  • PDF

헬리데크 설계를 위한 유한요소해석 기반 매개변수연구 (Parametric Study for Helideck Design using Finite Element Analysis)

  • 박두환;박용준;박주신;김정현;권병철;이제명
    • 한국해양공학회지
    • /
    • 제28권5호
    • /
    • pp.411-422
    • /
    • 2014
  • A helideck is a very valuable offshore structure for the take-off and landing of a helicopter. In order to design a helideck, the design parameters and various loads defined by the regulations related to the design of a helideck should be applied. In this study, a risk analysis was performed based on the helicopter accidents for seven years, and the frequency and possible reasons for accidents involving helidecks were investigated. In addition, a finite element analysis of a steel helideck mounted on the upper deck of a ship (shuttle tanker) was performed with the load that should be considered when designing a helideck. Based on the results, a parametric study of helideck was carried out by applying a variety of design parameters, and an improved helideck design was presented. This improved helideck reduced the steel used by up to 24% compared to the initial helideck design, and the results of a finite element analysis were analyzed and compared with those of the initial analysis.

수조 수치실험에 의한 말뚝구조물의 항력계수 산정 (Drag Coefficient Estimation of Pile Type Structures by Numerical Water Basin Experiments)

  • 박일흠;이근효;조영준
    • 한국해안·해양공학회논문집
    • /
    • 제21권1호
    • /
    • pp.45-53
    • /
    • 2009
  • RNG $k-{\varepsilon}$ 난류모형이 포함된 3차원 동수역학 수치모형(FLOW-$3D^{(R)}$)을 사용하여 수조 수치실험을 통한 항력계수 산정 가능성을 검토하였다. 물리적 실험으로 항력계수가 알려져 있는 말뚝구조물에 대하여, 사각형 말뚝구조물의 수치해에 의한 항력계수값이 $1.34{\sim}1.52$로 물리적 실험값인 $1.3{\sim}1.5$의 범위와 매우 유사한 결과를 보였다. 원형 말뚝구조물은 0.5$0.75{\sim}0.78$ 정도로서 물리적 실험치와 비교적 잘 일치하였다. 그리고 항력계수값이 알려지지 않은 열을 이룬 말뚝구조물의 경우 항력계수값은 구조물 간의 간섭으로 단일 구조물에 비해 항력계수가 크게 나타났으며, 각 구조물간의 거리비가 작아짐에 따라 구조물이 받는 항력계수값은 증가하는 양상을 보였다.

선박용 디젤엔진의 배기가스 열회수 시스템 (I) - R245fa 및 Water 의 작동유체에 대한 에너지효율 비교 - (Exhaust-Gas Heat-Recovery System of Marine Diesel Engine (I) - Energy Efficiency Comparison for Working Fluids of R245fa and Water -)

  • 최병철;김영민
    • 대한기계학회논문집B
    • /
    • 제36권3호
    • /
    • pp.293-299
    • /
    • 2012
  • 대형 선박의 추진용 디젤엔진에서 버려지는 배기가스의 열을 회수하기 위한 랭킨사이클이 적용된 발전시스템에 대하여 R245fa 및 water 의 작동유체들에 따른 열역학적 효율 특성을 분석하였다. 그 이론적인 계산 결과로, 고정된 질량유량의 R245fa 에 대하여 터빈입구의 압력이 증가할수록 사이클, 시스템, 및 전체적 효율이 증가하였고, 사이클에 의해 발생되는 순동력도 증가하는 특성을 보였다. 반면, water 의 경우에는 R245fa 에 비하여 더 낮은 질량유량 및 터빈입구 압력의 비율에서 최대의 시스템 효율을 보였다. 또한 water 에 대하여 최적화된 사이클의 순출력, 시스템 효율, 및 전체적 효율의 값들은 R245fa 의 경우보다 더 크게 나타났다.

대형 저속 디젤기관의 속도제어를 위한 로바스트 서보 제어기 설계 (Design of Robust Servo Controller for Large Size Low Speed Diesel Engines)

  • 정병건;양주호;변정환
    • 수산해양기술연구
    • /
    • 제33권1호
    • /
    • pp.46-58
    • /
    • 1997
  • The energy saving is one of the most important factors for profit in marine transportation. In order to reduce the fuel oil consumtion the ship's propulsion efficiency must be increased as possible. The propulsion efficiency depends upon a combination of an engine and a propeller. The propeller has better efficiency as lower rotational speed. This situation led the engine manufacturers to design the engine that has low speed, long stroke and a small number of cylinders. Consequently, the variation of rotational torque became larger than before because of the longer delay-time in fuel oil injection process and an increased output per cylinder. As this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variation of the delay-time and the parameter perturbation. In this paper we consider the delay-time and the perturbation of engine parameters as the modeling uncetainties. Next we design the robust servo controller which has zero offset in steady state engine speed, based on H sub($\infty$) control theory. The validity of the controller was investigated through the response simulation. We used a personal computer and an analog computer as the digital controller and the engine (plant) part respectively. And, we could certify that the designed controller maintains its robust servo performance even though the engine parameters may vary.

  • PDF

제주도 근해의 옥돔 어업과 어장 환경에 관한 연구 (The fishery and fishing ground environment for red horsehead (Branchiostegus japonicus) on the adjacent seas of Jeju Island)

  • 김정창;강일권;김동선;이준호
    • 수산해양기술연구
    • /
    • 제42권1호
    • /
    • pp.19-29
    • /
    • 2006
  • To investigate the fishery and fishing ground environment of red horsehead (Branchiostegus japonicus), the author analyzed the fishery data and examined the amount of catches and oceanic environment on the adjacent seas of Jeju island and East China Sea. It was turned out that the favourable season of the red horsehead fishery is the month from March to June, the main fishing ground is located in 60 mile radius from the position $32.5^{\circ}N,\;125.7^{\circ}E$. The bottom seawater temperature in fishing ground was shown between $l3^{\circ}C\;and\;16^{\circ}C$, the salinity was appeared between 33.5 and 34.0psu without the seasonal variation of the year. Concentrations of materials(e.g, $NO_3^-\;and\;NO_2^-$) in spring and summer time in main fishing ground were higher than any other seasons, but that of phospheric materials were lower than any other seasons. Concentrations of $chlorophyll\;-\;{\alpha}$ in the main fishing ground was the highest in spring and summer at the surface layer, but the vertical profile of the $chlorophyll\;-\;{\alpha}$ concentrations in all seasons were not variable at bottom layer. Mean density of zooplankton abundance according to the vertical structure was higher and much stable in summer and autumn than spring and winter.

Methods for sampling and analysis of marine microalgae in ship ballast tanks: a case study from Tampa Bay, Florida, USA

  • Garrett, Matthew J.;Wolny, Jennifer L.;Williams, B. James;Dirks, Michael D.;Brame, Julie A.;Richardson, R. William
    • ALGAE
    • /
    • 제26권2호
    • /
    • pp.181-192
    • /
    • 2011
  • Ballasting and deballasting of shipping vessels in foreign ports have been reported worldwide as a vector of introduction of non-native aquatic plants and animals. Recently, attention has turned to ballast water as a factor in the global increase of harmful algal blooms (HABs). Many species of microalgae, including harmful dinoflagellate species, can remain viable for months in dormant benthic stages (cysts) in ballast sediments. Over a period of four years, we surveyed ballast water and sediment of ships docked in two ports of Tampa Bay, Florida, USA. Sampling conditions encountered while sampling ballast water and sediments were vastly different between vessels. Since no single sample collection protocol could be applied, existing methods for sampling ballast were modified and new methods created to reduce time and labor necessary for the collection of high-quality, qualitative samples. Five methods were refined or developed, including one that allowed for a directed intake of water and sediments. From 63 samples, 1,633 dinoflagellate cysts and cyst-like cells were recovered. A native, cyst-forming, harmful dinoflagellate, Alexandrium balechii (Steidinger) F. J. R. Taylor, was collected, isolated, and cultured from the same vessel six months apart, indicating that ships exchanging ballast water in Tampa Bay have the potential to transport HAB species to other ports with similar ecologies, exposing them to non-native, potentially toxic blooms.

경계조건과 두께 변화에 따른 사각탱크의 진동 특성 (Vibration Characteristics of A Rectangular Tank in accordance with Changing Thickness And Boundary Condition)

  • 배성용
    • 동력기계공학회지
    • /
    • 제15권1호
    • /
    • pp.24-31
    • /
    • 2011
  • Rectangular box type structures are used in many fields of civil, mechanical and marine engineering. Especially, Most ship structures are often in contact with inner or outer fluid, like ballast, fuel and stem tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine and propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tanks. Many authors have studied vibration of rectangular tanks containing fluid. Few research on dynamic interaction among tank walls filled with fluid are reported in the vibration of rectangular tanks recently. In case of rectangular tanks, structural coupling between adjacent panels and effect of vibration modes of multiple panels on added mass of water have to be considered. In the previous report, a numerical analysis is performed for the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing breadth of the plates by using finite element method for plates and boundary element method for fluid region. In this paper, the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing length, thickness, and boundary condition of the plates are investigated numerically and discussed.

A Comparative Study for Red Tide Detection Methods Using GOCI and MODIS

  • Oh, Seung-Yeol;Jang, Seon-Woong;Park, Won-Gyu;Lee, Jun-Ho;Yoon, Hong-Joo
    • 대한원격탐사학회지
    • /
    • 제29권3호
    • /
    • pp.331-335
    • /
    • 2013
  • This study detected red tide areas using the existing Moderate-Resolution Imaging Spectroradiometer(MODIS) and Geostationary Ocean Color Imager(GOCI), and then compared the results between results of two sensors. The coasts of Jeollanam-do in the South Sea of Korea were set as the study area based on the red tide data which occurred on Aug. 26th, 2012. This study compared the results of sensors to detect red tides by using a satellite. In the results of analyzing MODIS by limiting it as chlorophyll concentration and the sea surface temperature which is considered to have red tides by the existing researches, it was possible to delete considerable amount of errors compared to the case of detecting red tides by using only chlorophyll while still there were differences from the range of red tides actually observed. In the results of GOCI by using empirical algorithm for detecting red tides, currently used by Korea Institute of Ocean Science & Technology(KIOST), it was possible to obtain more detailed results than MODIS. However, there was an area misjudged as red tides due to the influence of clouds. Also both MODIS and GOCI extracted red tides were not actually occurring, which might be because they were not able to perfectly distinguish red tides from turbid water in coastal areas with high turbidity.