• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1308-1318
• /
• 2016

In order to prevent the maritime accident, all seafarers who work on fishing vessels over G/T 20 tons are required to undergo the basic safety training by the Seafarer's Act. 45% of domestic crews have boarded on the fishing vessels. However, the fishermen have been trained in accordance with the STCW(International convention on standards of training certification and watch-keeping for seafarers) Convention. But safety training courses for seaman do not reflect on the safety equipment and the limitation of the fishing vessel in the training contents which is organized in accordance with the merchant ship by STCW convention and code. Most of the fishing vessels are small fishing boat of less than G/T 80 tons. Small fishing vessels are operating with only a minimum of safety equipment that has been defined by the fishing vessel safety equipment standard. Due to the safety training that does not fit the situation of the fishing boat, the level of satisfaction by the crews onboard is low for the training. Furthermore, there is a difficulty in achieving the goal of safety education. In order to carry out the safety training that is suitable for fishermen, it is required to provide appropriate standards for the safety education of workers of small fishing boat, by understanding the current state of the domestic fishing vessels. The purpose of this study is to define the aforementioned problems and to provide the standard for the safety education of fishermen. In order to complete the purpose, the research team has conducted a analyzation for registered domestic fishing vessel and safety equipment standard.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.393-401
• /
• 2017

As the importance of software in various industry areas has been increased, the number of accidents related to software safety are growing up. The key industries such as railroads, aviation and medicine, recommend IEC 61508 and international safety standards for their own to achieve functional safety and reduce the issues caused by that. For equipment of ship navigation, there are not any particular standards or guidance which Korean users can introduce as considering software functional safety. This article defines the procedure and outcomes of the risk analysis in order to secure software functional safety in marine navigational equipment and applies them to an echo sounder as a case study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.564-570
• /
• 2014

This paper propose a method to detect and track a human face using depth information as well as color images for detection of drowsy driving. It consists of a face detection procedure and a face tracking procedure. The face detection procedure basically uses the Adaboost method which shows the best performance so far. But it restricts the area to be searched as the region where the face is highly possible to exist. The face detected in the detection procedure is used as the template to start the face tracking procedure. The experimental results showed that the proposed detection method takes only about 23 % of the execution time of the existing method. In all the cases except a special one, the tracking error ratio is as low as about 1 %.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.275-281
• /
• 2011

One of the major technology issues in the ship production processes is the curved hull forming process that is a bottle neck and performed by experienced workers. In order to automate the curved hull forming process, there are a lot of attempts to develop the automation system by many shipbuilding companies and academic labs. However they have some problems which put the developed system in the difficulties to be used and maintained in the yard. In this paper, the problems are formed and solved by using tailored Systems Engineering Process which consists of four steps, those are requirement definition, system design, implementation of subsystem and components, and system integration and verification. A prototype for the proposed system development methodology is implemented. From the consideration of the prototype implemented, it is verified that this methodology can be an alternative to solve the problems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.491-496
• /
• 2013

Since IMO(International Maritime Organization, hereafter IMO) has decided the Wing-In-Ground craft as one of the ships, A few regulations and recommendations have been revised and approved internationally and domestically. However, the navigation rules considering types and navigation characteristics to secure the safe navigation of Wing-In-Ground craft are not sufficient and especially, there are no navigation rule between Wing-In-Ground crafts. In this situation, it is judged that the navigation rules related to the Wing-In-Ground crafts in any condition of visibility should be moved to the section of the ones in sight of one another to define the responsibilities between WIG and other vessels, and the new regulation, which Type 'B' and 'C' WIGs should avoid Type 'A' WIG, has to be established to ensure the safe navigation between WIGs on the current laws.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.107-113
• /
• 2010

The criteria of tugboat requirement in domestic trading ports have been determined by the administrator of regional maritime affairs and port office on the basis of the regulations for the tugboat operations and management. But, there is a little confusion that the criteria of tugboat requirement and method for calculation of them are different from port to port and total power calculated on the basis of power per tugboat requirements by the number of tugs is not in accordance with total required power for the use of tug in several ports. The comparison of tugboat requirements among domestic major ports showed that it should be necessary for the criteria to be made in unified form. Because the current criteria are only on the basis q the ordinary condition with wind velocity under 10m/s, the criteria on the condition of the wind velocity over 10m/s are suggested to be necessary for the precautions against a disaster such as unexpected strong winds or typhoon.

• Plant Journal
• /
• v.13 no.2
• /
• pp.39-45
• /
• 2017

This paper is a study on FEED validation model that can be used in the bidding stage of small utility equipment in offshore plant industry using system engineering technique. Currently, domestic marine plant equipment industry companies are faced with the financial risk of project execution as they enter marine plant. The major cause was the insufficient ability to verify the FEED output from the contractor (Engineering or Procurement and Construction) of the equipment manufacturer (COMPANY or EPC). Therefore, we propose FEED design verification method that simplifies the system engineering method that sequentially applies requirements analysis, function, performance analysis and physical architecture building process. Also, we verified the suitability of the developed model by comparing the results of applying the developed FEED verification model and the verification method that depends on the existing experience for the small utility equipment (Air Compressor).

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.97-104
• /
• 2009

Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.168-172
• /
• 2005

An autopilot system of a ship is very important for a safe and convenient navigation, which is realized with getting an azimuth data from a gyrocompass, a magnetic compass and a GPS(Global Positioning System) compass. Magnetic compass an azimuth error is generated by a vessel magnetism material such as steels. The magnetic pole is detected by the magnetic field sensor, it does not coincide with the true north, therefore, the detected azimuth data can not but accompany error. In this paper, in order to detect the minimum change of azimuth data which generates errors of azimuth information, a search algorithm using the Kalman Filtering method is utilized. The digital electronic compass is designed with the integration algorithm using the merits of an earth's magnetic field sensor and a GPS receiver.