• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.92-97
• /
• 2006

Hull forms of a high speed small boat have been developed through numerical studies. A round bilge type hull form has been drived form a using chine hull form with HCAD, a hull form variation software. Wave resistance and the flow fields around the ships have been computed using well-known software, WAVIS. This software employs Rankine source method with non-linear tree surface condition as well as dry transom boundary conditions. The round bilge hull form showed better resistance performance than to the chine hull form for the whole speed range. However, considering the building and labor costs of the small shipyard, the chine hull form has been selected and its wave resistance characteristics has been improved by modifying the bow regions and applying the stem wedge. It is found that the effect of stem wedge is quite satisfactory to improve the resistance characteristics of high speed chine hull form.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.726-734
• /
• 2019

The current maritime industry is expected to have a significant impact on the role of maritime-related technologies and systems, especially seafarers, in the rapidly changing Fourth Industrial Revolution. The Maritime Autonomous Surface Ship (MASS) aims to reduce the number of safety accidents and improve seafarers' working environment. With regard to MASS, the International Maritime Organization has been trying to minimize unexpected impact in the maritime education and training sector by establishing international conventions such as the Standards of Training, Certification and Watchkeeping for Seafarers. However, domestic designated educational institutions have not yet established an education and training scheme to develop seafarers who will be on board for MASS. Therefore, this paper reviews the technology of MASS, analyzes the changes in education and training in order to upgrade the qualifications, and suggests the competencies of smart seafarers equipped with the integrated management ability required for Artificial Intelligence, Big Data, Cybersecurity, and the Digital System Revolution through education and training. In addition, this study provides basic information for the education and training of seafarers who are optimized for the rapidly changing technological environment.

• Strategy21
• /
• s.41
• /
• pp.153-173
• /
• 2017

On 15 December 2015, China seized an underwater drone belonging to the U.S. in the South China Sea. The underwater drone was then about to be retrieved by the Bowditch, a U.S. naval ship.Although China returned the underwater drone to the U.S. on 20 December 2016, the incident resulted in the considerable controversy involving the use of underwater drones. The reason for this is that the seizure of the underwater drone happened in the exclusive economic zone (hereafter referred to as "EEZ") of the Philippines. Part XIII of the United Nations Convention on the Law of the Sea (hereafter referred to as "UNCLOS") governs the matters of marine scientific research (hereafter referred to as "MSR"). If a State intends to use an underwater drone in the EEZ of another coastal State for the purpose of MSR, the former has to obtain the consent of the latter in accordance with relevant provisions included in Part XIII of the UNCLOS. However, it is not obvious whether the consent of a coastal State should be required to launch an underwater drone in the EEZ of the State for the purpose of hydrographic surveying or military surveying. Maritime powers such as the U.S. regard hydrographic surveying or military surveying as part of "other internationally lawful uses of the sea related to these freedoms, such as those associated with the operation of ships, aircraft and submarine cables and pipelines" found in Article 58(1) of the UNCLOS, or part of the freedom of the high seas. This interpretation is not incompatible with the implications that the UNCLOS has. Nevertheless, Korea cannot accept this kind of interpretation that is supported by maritime powers. The freedom of hydrographic surveying or military surveying could imply that the EEZ of Korea would be full of underwater drones launched by China, Japan or even Russia. Hence, Korea should claim that the data collected for the purpose of MSR cannot be distinguished from that collected for the purpose of hydrographic surveying or military surveying. This means that hydrographic surveying or military surveying without the consent of a coastal State in the EEZ of the State should not be permitted.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.92-93
• /
• 2005

A contract for the shipbuilding is usually a complicated and involves statement of rights, obligations and responsibilities which each party agrees vis-a vis the other. The ultimate purpose of the contract is the sale and transfer of the finished ship by the builder to the buyer. Contracts for the construction and sale of ships are categorized as contracts for the sale of goods under English, United States, Germany and some countries law. On the other hand, The shipbuilding contract may be classified, not as a contract of sale but as a contract for work and materials under Korea, Japan and some countries law. Especially, most of countries are now well settled with regard to liability of a manufacturer in tort for physical injury and on the other for pure economic loss to remote owners of chattels. Where there is either a breach of contractual warranty or an implied warranty, there may be admiralty jurisdiction, depending once again on the situs of the event and its relationship to traditional maritime activity. Contract principles will be applied to the first type of warranty and tort principles will be applied to the second. First of all, this thesis is dealt with the contents of contract under English Law. Secondly, this thesis is analysed into the liability of shipbuilder in Products Liability under English, American and Korean Law comparisons. In conclusion, the author tries to give some suggestions as countermeasures of Products Liability to the shipbuilder in Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.850-856
• /
• 2012

Bilateration using two fixed nodes has been used in the field of the real time indoor location system in the narrow space such as building or ship passage. However, as the distance between the fixed nodes increases or any obstructions exist in their zone, it is difficult to detect the location of mobile node(user) due to the degradation of its reception ratio. In order to compensate for these problems, this paper presents, based on IEEE 802.15.4a chirp signal, a new real time indoor location system using stride measurement algorithm which can calculate the location through sensors attached to user. The proposed system consists of an ultrasonic sensor to measure the leg length, a geomagnetic sensor to recognize the user's orientation, and an inertial sensor to obtain the angle between the legs. The experimental results are shown that the proposed system has twice or more accurate output compared with conventional indoor location method in the section which is partially out of communication reachability.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.264-269
• /
• 2016

This paper reports a fundamental study of temperature characteristics of a solar pond with an insulation layer. Further, these characteristics were compared with those of a solar pond without the insulation layer. The governing equation was discretized via finite difference method. The governing equations are two-dimensional unsteady-state second-order partial differential equations. The conclusions of the study are as follows: 1) If the depth of the solar pond was increased, the desired effect of increase in temperature was not produced because the amount of solar insolation received by the bottom of the solar pond decreased. 2) As the temperature of the soil during winter is higher than the temperature of the water in a solar pond, heat was transferred from the soil to the solar pond. 3) For the case of the solar pond with insulation layer, it was estimated that the dependence rate of solar energy was 83.3% and that of the boiler was 16.7%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.744-752
• /
• 2007

Recently a fuel oil of the diesel engine in the ship is being changed with low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine like cylinder liner ring groove of piston crown, spindle and seat ring of exhaust valve are increased with using of heavy oil of low quality In particular the degree of wear and corrosion in between valve spindle and seat ring are more serious compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weld to the valve spindle and seat ring is a unique method to prolong the life of the exhaust valve in an economical point of view In this study. corrosion property of both weld metal zone and base metal was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 5% $H_2SO_4$ solution. in the case of being welded with some welding methods and welding materials to the exhaust valve specimen as the base metal. In all cases. the values of hardness of the weld metal zone were more high than that of the base metal. And their corrosion resistance were also superior to the base metal. The weld metal of A2F(AC SMAW: 2 pass welding with foreign electrode) showed a relatively good results to the corrosion resistance as well as the hardness compared to the ether welding methods and welding materials. Moreover it indicated that hardness of the weld metal by the domestic electrode was considerably high compared to that of the foreign electrode.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.893-900
• /
• 2008

The heat exchangers in the ships have been changed from the conventional shell & tube type to the plate type due to some merits as a compactness, a high thermal efficiency and a light-weight. In recent. it is reported that the vacuum phenomena were occurred in the seawater outlet piping of a main central cooler (MCC) on the ships. From the viewpoints of a common sense, the vacuum pressure in the seawater piping is rare event and difficult to be convinced because the seawater is pumped into the piping by a seawater pump with a high discharge head. However, the occurrence of a vacuum pressure in the seawater line of an MCC is real situation and often gives a severe damage to a rubber gasket of an MCC with a plate type heat transfer area. In this study, we analyzed the vacuum pressure in the seawater line of an MCC by using the simpl Bernoulli's equation and found that the vacuum pressure in the seawater line of an MCC is inevitable untill the installation postion of an MCC is not lowered.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1170-1174
• /
• 2014

If cavitation occurs in propeller, it generates vibration and noise accordingly which results in low efficiency of propeller. It's important to increase cavitation inception speed(CIS) since the noise of cavitation increases significantly from the beginning of cavitation. This paper describes the result of actual observation and measurement onboard ship with controllable pitch propeller(CPP), so as to verify the first occurrence phenomenon of cavitation. The research suggests new type of controllable pitch propeller with improved CIS at the bolt as it started with bolt cavitation as result of observation. It's not found bolt cavitation on the CPP proposed in this paper, furthermore its CIS is increased approximately by 4.5 knots than the existing CPP. The result of the research can be used for development of low-noise CPP and improving performance of CIS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.73-76
• /
• 2005

Current operating system and passenger satisfaction level of remote island route are examined in this study. A large quantity of survey was conducted among remote island route passengers and the result was examined in depth The survey result slightly exceeded average effectiveness rating; 2.8 based on a five-point scale was obtained. The survey shows that the service satisfaction level is not very high When long term remote island route development plan is established, a support from the government is expected for survey result to reflect on the development plan.