• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.252-258
• /
• 2009

Engine bench tests has been done on a common-rail diesel engine with bio-diesel fuel to study effects of B100 and B20 on output power, fuel consumption and emissions. Test results show that B100 and B20 could reduce PM, HC, CO emission and smoke, but power decrease, fuel consumption increase and NOx increase obviously, B100 reduce PM and DS with $50%{\sim}70%$ and $80%{\sim}85%$ compared with diesel fuel, while B20 reduce PM and DS with $25%{\sim}35%$ and $30%{\sim}40%$. NOx of B100 and B20 increase $5%{\sim}20%$ compare to diesel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.754-762
• /
• 1998

Exhaust emissions in diesel engine are affected by fuel properties but the reason for this is not clear. Especially the recent strong interest in using low-grade fuel demands extensibe investigation in order to clarify the exhaust emissions. Bio-Diesel oil has a great possibility to solve the pollution problem caused by the exhaust gas from diesel engine vehicles. The use of bio-oils in diesel engines has received considerable atten-tion to the forseeable depletion of world oil supplies. So bio-diesel oil has been attracted with attentions for alternative and clean energy source. The purpose of this paper is to evaluate the fea-sibility of the rice-bran oil for alternative fuel in a diesel engine with rgard to exhaust emis-sions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.328-336
• /
• 1998

Marine reduction gears are usually used to increase the propulsion efficiency of propellers for ships powered by medium and small sized high speed diesel engines. Most of shaft systems adopt flexible couplings to absorb the transmitted vibratory torque from the engines to the reduction gears and to prevent the chattering phenomenon of reduction gears. However some elastic couplings show non-linear characteristics due to the variable torque transmitted from the main engines and the change of ambient temperature. In this study dynamic characteristics of flexible couplings sare investigated and their effects upon various vibratory conditions of propulsion systems are clarified. A calculation program of torsional vibration for the propulsion systems are clarified. A calculation program of Results of the program developed are compared with ones of the existing linear method and propulsion systems with the elastic couplings the transfer matrix method is adopted which is found to give satisfied results.

• 해양환경안전학회지
• /
• 제25권7호
• /
• pp.974-981
• /
• 2019

미세먼지발생 문제는 커다란 사회적 문제로 대두되고 있다. 선박에서는 주 추진 동력원으로 디젤엔진을 주로 사용하고 있다. 본 연구에서는 디젤엔진에서 발생하는 미세먼지로 알려진 입자상 물질을 줄이기 위해서 디젤엔진의 후처리시스템으로 사용 중인 DPF(디젤미립자 필터, Diesel particulate filter)를 소개하고자 한다. DPF의 소재로는 Cordierite와 SiC (Silicon carbide)의 두 가지가 사용되고 있다. 본 논문에서는 SiC DPF에 사용되는 접합제의 물성 향상을 위해서 기존 접합제로 사용된 SiC 계열의 물질 대신 코디얼라이트를 사용하여 열팽창계수 변화를 통한 고온 변형에 대한 열 내구성을 평가하였으며, 접합제와 Segment 사이의 결합을 결정짓는 바탕제에 주성분인 실리카졸의 pH 변화에 따른 물성 변화를 확인하였다. 이를 기반으로 실리카 졸의 반응성을 높이기 위해 Siline계 커플링제를 첨가하거나 SiC를 일부 첨가함으로써 접합제의 물성 변화의 영향에 대해서 실험을 통하여 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.762-767
• /
• 2016

디젤엔진은 다른 엔진과 비교했을 때 열효율이 높고 다양한 연료를 사용할 수 있다는 장점을 가지고 있다. 하지만, 대기오염을 유발하는 배기배출물이 발생한다는 단점도 가지고 있다. 따라서 전 세계적으로 디젤엔진을 사용하는 승용차 및 상용차, 선박 등에 대한 국제규정인 EU Euro 6, IMO MEPC Tier 3 및 US EPA Tier 4 등의 대기환경오염법이 더욱 엄격해져가고 있다. 본 연구에서는 경유를 사용하는 발전용 4행정 디젤엔진을 실험 대상으로 하였으며, 유용성 Ca계 유기금속화합물을 경유에 투입하여 실험 결과를 비교, 분석하였다. Ryu et al. 논문에서는 2행정 디젤엔진에 연료첨가제를 적용했던 연구결과를 발표하였다. 본 논문에서는 4행정 디젤엔진에 연료첨가제를 투입하여 엔진의 성능 및 배기배출물 개선에 대해서 실험을 실시하였다. 본 연구를 통해서 2행정과 4행정 디젤엔진 모두에 연료첨가제를 적용하여 그 결과를 고찰해 볼 수 있었으며 유용성 Ca계 유기금속화합물 연료첨가제가 디젤엔진의 성능(연료소비율, 배기온도) 및 배기배출물(질소 산화물, 일산화탄소)을 개선시킬 수 있음을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.62-68
• /
• 2010

대기오염 및 지구온난화와 관련하여 디젤기관의 친환경, 고효율에 대한 요구가 선박기관에도 강화되고 있다. 이와 관련하여 많은 새로운 기술들이 연구, 적용되고 있으나, 이들은 주로 신조선에 관심이 집중되어 있다. 선박은 건조된 후 비교적 장기간 이용되기 때문에 이미 운항중인 현존선에 대하여도 이에 관한 연구가 필요하다고 판단되며 이는 주로 엔진성능의 개선에 관한 연구가 될 것이다. 이 논문은 선박용 2행정 디젤기관의 성능을 시뮬레이션 하기위한 프로그램을 개발한 결과를 보고한다. 현존선의 엔진성능은 운전시간의 경과에 따라 열화되어 가기 때문에 엔진의 열화성능을 예측할 수 있도록 한 것이 본 연구에서 개발된 프로그램의 특징이다. 예측결과는 엔진메이커에서 사용하고 있는 TOP-CODE 프로그램의 계산결과와 비교하였으며, 양호한 결과를 보이고 있음을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권4호
• /
• pp.61-71
• /
• 1995

Nowadays the thin-walled metal bearing, which is made seperately from the bearing housing and has the ratio of wall thickness/bearing diameter being less than 1/30, are used in many newly developed large-sized slow speed diesel engines for the purpose of upgarding lubication performance and easy maintenance according to the trends of increasing output per cylinder and lowering engine speed. The type of this bearing has been used generally in many small-sized high speed engines applied for automobile, high speed craft and industrial power generation systems since 1950s. But the tranditional thick-walled bearings, whice are linned white metal on the bearing housing directly, have been installed on the large and slow speed engines until 1990s due to the easy manufacturing procedures. In this study we have calculated optimum dimensions of the metal bearing, fabricated special zigs for crush measurement, model test machine, 2 sets of specimens.(crosshead pin bearing, $\phi$818*552*20mm) for B & W 6S70MC(20, 940*88rpm), and evaluated metal constact phenomena of white metal, its friction coefficient, temparature rise through the model test and field performance test.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.457-465
• /
• 2004

Environmental protection on the ocean has been interested and nowadays the International Maritime Organization(IMO) has advanced on the prevention of air pollution from ships. This study presents the performance and the emission characteristics of 4 stroke marine diesel engines for generation application in D2 cycle(IMO mode). The effects of important operating parameters, such as intake air pressure. intake air temperature and maximum combustion pressure on NOx emissions were also described. Emissions measurement and calculation are processed according to IMO Technical Code. The results show that the maximum combustion pressure by fuel injection timing control and intake air temperature has strong influence on NOx emission production. But NOx emission is not affected by intake air pressure and exhaust gas back pressure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.43-52
• /
• 2000

In this study, a simulation program was developed, which could simulate a fuel injection system for low-speed marine diesel engine. The fuel injection system was divided into fuel injection pump, high pressure pipe and fuel injection valve. The unsteady flow in the high pressure injection pipe was analyzed by the method of characteristics, considering cavitation and variation of fuel density and bulk modulus. It was confirmed that the simulation results were good agree with experimental results of injection pressure and quantity at the high pressure distributor in fuel injection system for the training ship "M/V Hannara". And the effects of the atomizer hole diameter, maximum needle lift, plunger diameter and nozzle opening pressure were also investigated with simulating results.g results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.61-67
• /
• 2000

Many research works for improving a boundary lubrication performance have been executed by using solid lubricants, and been tried to apply an engine lubrication. However those general lubricants like MoS$_2$ or PTFE have not been applied on engines due to the extreme conditions such as very high temperature and pressure by combustion process in a cylinder. A copper nickel alloy fine particle has been introduced and studied. In this Paper the lubricant using the alloy Particles is applied on a marine diesel engine and assessed by the engine performance test The results showed the increase of cylinder pressure related strongly to the engine efficiency as well as the improving the engine lubrication performance.