• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1251-1256
• /
• 2014

The use of lubrication oil is of many purposes and one among them is to drive the engine mounted on a ship. Hence the supply of clean lubrication oil is important. And an oil purifier is one of key components in marine diesel engines. At present, the element type full-flow oil filter has been widely used for cleaning the engine oil. The self-driven centrifugal oil purifier is a device which is used to remove the impurities in lubrication oil using a jet flow. The flow characteristics and the physical behaviors of particles in this self-driven oil purifier were investigated numerically and the filtration efficiencies were evaluated. For calculations, a Computational Fluid Dynamics method is used and the Shear Stress Transport turbulence model has been adopted. The Multi Frames of Reference method is used to consider the rotating effect of the flows. The influence of centrifugal forcehas been numerically investigatedto improve filtration efficiency of tiny particles. As a result of this research, it was found that the particle filtration efficiency using the only center axis rotating and outer wall rotating system are higher than that of the fully rotating system in the self-driven oil purifier.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.147-153
• /
• 2014

The centrifugal oil purifier is used in an engine for lubrication and to remove impurities. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. An impure particle in the oil is separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are absorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviors of particles in this centrifugal oil purifier were investigated numerically and the filtration efficiencies was evaluated. For calculations, a commercial code is used and the SST (Shear Stress Transport) turbulence model has been adopted. The MFR (Multi Frames of Reference) method is introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies are evaluated. It has been verified that the filtration efficiency is increased with the increments in the particle size, the particle density and the rotating speed of the cylindrical chamber.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.804-809
• /
• 2007

In order to provide reliability. reproducibility. objectivity of solid particle separation performance test on marine centrifugal purifier, an investigation had been done on solid test dusts. test standards and designation of a definite standard test dust In test specifications or standards. ISO 121031-1 A2 test dust is the best test particle to meet commercial and military fuel oil and lube oil requirements on marine standards.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.84-91
• /
• 2010

The centrifugal oil purifier is used in ships for purifying the engine lubrication oil. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. The dust particles in the oil are separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are adsorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviours of particles in this centrifugal oil purifier have been investigated numerically and the filtration efficiencies have been evaluated. For the calculations, a commercial code has been used and the SST k-${\omega}$ turbulence model has been adopted. The MRF (Multiple Reference Frame) method has been introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies have been evaluated. It has been verified that the filtration efficiency is increased with the increments of the particle size, the particle density and the rotating speed of the cylindrical chamber.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.44-49
• /
• 2017

본 연구에서는 선박 엔진 오일을 여과하는 검증된 기술인 원심정화기(Centrifugal Filter)를 이용하여 수분배출 구조를 설계하고 적용함으로써, 원심 청정기 시스템(Centrifugal Purifier System)을 개발하고자 한다. 선박엔진에서 윤활 및 냉각을 담당하는 오일은 시간이 경과할수록 미세입자 슬러지가 증가하고 때로는 수분의 유입에 따라 원래의 기능을 담당할 수 없게 되어 엔진내부에 치명적인 기계적 손상을 초래한다. 따라서 수분 제거 원리 고안 및 검증, 적절한 배출 구조 설계를 연구하였으며, 개발된 제품은 공인시험을 통해 유효함을 검증하였다. 이는 실제 선박에서 절실히 필요한 엔진 오일의 수명 연장 및 폐오일 감소, 기계 부품 손상 저감 등에 기여할 것으로 기대한다.

• 해양환경안전학회지
• /
• 제13권1호
• /
• pp.39-45
• /
• 2007

최근 국제 유가의 상승으로 인한 선박 운용비를 절감하기 위하여 중소형 선박에서도 저질연료유의 사용이 검토되고 있는 추세이다. 이 연구에서는 현재 중소형 선박에서 연료유로 사용중인 경유와 중유MF380을 혼합하여 소형선박에 사용이 가능하도록 제조한 혼합연료유인 MF30 연료유에 대하여 그 물리 화학적 특성을 분석하고 정제처리 및 연료유첨가제 효과에 대해 알아보았다. 연구결과 두 가지 전처리 방식인 원심식청정기와 가열 및 균질 방식(M.C.H)의 효과는 다소 미약하였지만, 유동점과 인화점은 다소 낮아졌다. 연료유첨가제로 인한 개질 효과는 뚜렷이 나타나지 않았다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.291-297
• /
• 2006

최근 국제 유가의 상승으로 인한 선박 운용비를 절감하기 위하여 중소형 선박에서도 저질연료유의 사용이 검토되고 있는 추세이다. 이 연구에서는 현재 중소형 선박에서 연료유로 사용중인 경유와 중유 MF380 을 혼합하여 소형선박에 사용이 가능하도록 제조한 혼합연료유인 MF30 연료유에 대하여 그 물리 화학적 특성을 분석하고 정제처리 및 연료유첨가제 효과에 대해 알아보았다. 연구 결과 두가지 전처리 방식인 원심식청정기와 가열 및 균질 방식 (M.C.H) 의 효과는 다소 미약하였지만, 유동점과 인화점은 다소 낮아졌다. 연료유첨가제로 인한 개질 효과는 뚜렷이 나타나지 않았다.

• Corrosion Science and Technology
• /
• 제13권1호
• /
• pp.28-35
• /
• 2014

Recently, the fuel oil of diesel engines of marine ships has been increasingly changed to heavy oil of low quality as the oil price is getting higher and higher. Therefore, the spiral gear attached at the motor of the oil purifier which plays an important role to purify the heavy oil is also easy to expose at severe environmental condition due to the purification of the heavy oil in higher temperature. Thus, the material of the spiral gear requires a better mechanical strength, wear and corrosion resistance. In this study, the heat treatment(tempering) with various holding time at temperature of $500^{\circ}C$ was carried out to the alloy of Cu-7Al-2.5Si as centrifugal casting, and the properties of both hardness and corrosion resistance with and without heat treatment were investigated with observation of the microstructure and with electrochemical methods, such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and a.c. impedance. in natural seawater solution. The ${\alpha}$, ${\beta}^{\prime}$ and ${\gamma}_2$ phases were observed in the material in spite of no heat treatment due to quenching effect of a spin mold. However, their phases, that is, ${\beta}^{\prime}$ and ${\gamma}_2$ phases decreased gradually with increasing the holding time at a constant temperature of $500^{\circ}C$. The hardness more or less decreased with heat treatment, however its corrosion resistance was improved with the heat treatment. Furthermore, the longer holding time, the better corrosion resistance. In addition, when the holding time was 48hrs, its corrosion current density showed the lowest value. The pattern of corroded surface was nearly similar to that of the pitting corrosion, and this morphology was greatly observed in the case of no heat treatment. It is considered that ${\gamma}_2$ phase at the grain boundary was corroded preferentially as an anode. However, the pattern of general corrosion exhibited increasingly due to decreasing the ${\gamma}_2$ phase with heat treatment. Consequently, it is suggested that the corrosion resistance of Cu-7Al-2.5Si alloy can be improved with the heat treatment as a holding time for 48 hrs at $500^{\circ}C$.