• 제목/요약/키워드: Marine bioprocess engineering

검색결과 27건 처리시간 0.02초

The Effects of Light Intensity, Inoculum Size, and Cell Immobilisation on the Treatment of Sago Effluent with Rhodopseudomonas palustris Strain B1

  • Ibrahim, Shaliza;Vikineswary, S.;Al-Azad, Sujjat;Chong, L.L.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제11권5호
    • /
    • pp.377-381
    • /
    • 2006
  • A study was carried out to determine a suitable light intensity and inoculum size for the growth of Rhodopseudomonas palustris strain B1. The pollution reduction of sago effluent using free and immobilised R. palustris cells was also evaluated. The growth rate in glutamatemalate medium was highest at 4 klux compared to 2.5 and 3 klux. The optimal inoculum size was 10% (v/v). Both the COD and BOD of the sago effluent were reduced by 67% after three days of treatment. The difference in biomass production or BOD and COD removal with higher inoculum sizes of 15 and 20% was minimal. This could be attributed to limited nutrient availability in the substrate. The use of immobilised cells of R. palustris reduced the pollution load 10% less compared to pollution reduction by free cells. Hence, there was no significant difference in using free or immobilised cells for the treatment of sago effluent.

Biosorption of Cr, Cu and Al by Sargassum Biomass

  • Lee, Hak-Sung
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제2권2호
    • /
    • pp.126-131
    • /
    • 1997
  • The biosorption and desorption of Cr, Cu and Al were carried out using brown marine algae Sargassum fluitans biomass, known as the good biosorbent of heavy metals. The content of alginate bound to light metals could be changed by physical and chemical pretreatment. The maximum uptake of Cr, Cu and Al was independent of the alginate content. The maximum uptaker of Al was two times(mole basis) than those of Cu and Cr. The aluminum-alginate complex was found in the sorption solution of raw and protonated biomass. Most of Cu, Al and light metals sorbed in the biomass were eluted at pH 1.1. However, only 5 to 10% of Cr sorbed was eluted at pH 1.1. The stoiceometric ion exchange between Cu and Ca ion was observed on Cu biosorption with Ca-loaded biomass. A part of Cr ion was bound to biomass as Cr(OH)2+ or Cr(OH)2+. Al was also bound to biomass as multi-valence ion and interfered with the desorbed Ca ion. The behavior of raw S. fluitans in ten consecutive sorption-desorption cycles has been investigated in a packed bed flow-through-column during a continuous removal of copper from a 35 mg/L aqueous solution at pH 5. The eluant used was a 1%(w/v) CaCl2/HC solution at pH 3.

  • PDF

Effect of Culture Conditions on Growth and Production of Docosahexaenoic Acid (DHA) using Thraustochytrium aureum ATCC 34304

  • Hur Byung-Ki;Cho Dae-Won;Kim Ho-Jung;Park Chun-Ik;Suh Hyung-Joon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권1호
    • /
    • pp.10-15
    • /
    • 2002
  • Environmental and medium factors were investigated as basic data for optimizing DHA production when using Thraustochytrium aureum. To study the effect of environmental conditions, the rotation speed and culture temperature were changed. Plus the trend of the growth characteristics, lipid content in the biomass, and DHA content in lipids were evaluated according to various initial glucose concentrations. The biomass, lipid, and DHA analyses showed that the physiological characteristics of T. aureum were closely related with the environmental and medium conditions, as in the case of other marine microorganisms. For example, a low rotation speed of 50 rpm lowered the cell growth rate as well as the DHA content in the lipids. A low temperature had a negative effect on the cell growth, yet a positive effect on the lipid content in the biomass. Different initial glucose concentrations had no effect on the lipid content in the biomass or DHA content in the lipids, yet did affect the cell growth. Accordingly, these results show that environmental and medium factors must be synthetically considered in order to optimize DHA production when using T. aureum.

Metabolic Flux Analysis of Beijerinckia indica for PS-7 Production

  • Wu Jian-Rong;Son Jeong Hwa;Seo Hyo-Jin;Kim Ki-Hong;Nam Yoon-Kwon;Lee Jin-Woo;Kim Sung-Koo
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제10권1호
    • /
    • pp.91-98
    • /
    • 2005
  • In order to investigate central metabolic changes in Beijerinckia indica, cells were grown on different carbon sources and intracellular flux distributions were studied under varying concentrations of nitrogen. Metabolic fluxes were estimated by combining material balances with extracellular substrate uptake rate, biomass formation rate, and exopolysaccharide (EPS) accumulation rate. Thirty-one metabolic reactions and 30 intracellular metabolites were considered for the flux analysis. The results revealed that most of the carbon source was directed into the Entner-Doudoroff pathway, followed by the recycling of triose-3-phosphate back to Hexose­6-phosphate. The pentose phosphate pathway was operated at a minimal level to supply the precursors for biomass formation. The different metabolic behaviors under varying nitrogen concentrations were observed with flux analysis.

Rhamnolipid Production in Batch and Fed-batch Fermentation Using Pseudomonas aeruginosa BYK-2 KCTC 18012P

  • Lee, Kyung-Mi;Hwang, Sun-Hee;Ha, Soon-Duck;Jang, Jae-Hyuk;Lim, Dong-Jung;Kong, Jai-Yul
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제9권4호
    • /
    • pp.267-273
    • /
    • 2004
  • The optimization of culture conditions for the bacterium Pseudomonas aeruginosa BYK-2 KCTC 18012P, was performed to increase its rhamnolipid production. The optimum level for carbon, nitrogen sources, temperature and pH, for rhamnolipid production in a flask, were identified as 25 g/L fish oil, 0.01% (w/v) urea, 25 and pH 7.0, respectively. Optimum conditions for batch culture, using a 7-L jar fermentor, were 200 rpm of agitation speed and a 2.0 L/min aeration rate. Under the optimum conditions, on fish oil for 216 h, the final cell and rhamnolipid concentrations were 5.3 g/L and 17.0 g/L respectively. Fed-batch fermentation, with different feeding conditions, was carried out in order to increase, cell growth and rhamnolipid production by the Pseudomonas aeruginosa, BYK-2 KCTC 18012P. When 2.5 g of fish oil and 100 mL basal salts medium, containing 0.01 % (w/v) urea, were fed intermittently during the fermentation, the final cell and rhamnolipid concentrations at 264 h, were 6.1 and 22.7 g/L respectively. The fed-batch culture resulted in a 1.2-fold increase in the dry cell mass and a 1.3-fold increase in rhamnolipid production, compared to the production of the batch culture. The rhamnolipid production-substrate conversion factor (0.75 g/g) was higher than that of the batch culture (0.68 g/g).

Thraustochytrium aureum ATCC 34304의 지질 및 지방산 조성 변화 (Variation in the Lipid Class and Fatty Acid Composition of Thraustochytrium aureum ATCC 34304)

  • 제은진;송상규;서정우;허병기
    • KSBB Journal
    • /
    • 제22권1호
    • /
    • pp.37-42
    • /
    • 2007
  • 본 연구에서는 배양시간에 따른 Thraustochytrium aureum ATCC 34304 균체 내부에 저장하는 지질의 지방산조성 및 균체 막에 축척하는 지질 내의 지방산조성의 변화 과정을 정량적으로 규명하였다. 건조균체량은 배양 5일째에 3.94 g/L를 나타내었으며, 균체당의 지질 함량은 배양 3일째에 최대값 25.0%를 나타내었다. 균체 내의 triacylglyceride (TAG)량은 배양 3일까지는 증가하였으나 그 이후에는 거의 일정한 값을 유지하였다. 반면 세포막을 구성하는 phospholipid (PL)의 함량은 3일까지는 감소하나 그 이후에는 일정한 값을 나타내었다. TAG를 구성하고 있는 다중불포화지방산의 함량은 배양 초기 60.3%이였으나 배양 5일 후에는 45.3%까지 감소하였으며, DHA는 42.1%에서 33.9% 까지 감소하였다. 포화지방산의 함량은 배양 초기에는 24.9%이었으나 배양 5일 후에는 27.8%까지 증가하였다. PL 내의 불포화지방산의 함량은 배양시간에 따라 48.0%에서 17.5%까지 크게 감소하는 경향을 나타내었으나, 포화지방산의 함량은 오차범위 내에서의 감소 경향을 나타내었다. 본 연구 결과에 의하면 배양시간이 경과하여 배양액내의 영양 환경이 열악하게 되는 경우 균주는 포화지방산보다 불포화지방산을 에너지원으로 우선 사용한다고 해석할 수 있다.

조류 성장 억제를 위한 녹조 및 적조 발생과 황사의 상관관계 초기적 연구 (An Initiative Study on Relationship between Algal Blooms and Asian Dust for Regulation of Algal Blooms)

  • 김태진;정재칠;서라벌;김형모;김대근;전영신;박순웅;이세윤;박준조;이진하;이재정;이은주
    • KSBB Journal
    • /
    • 제29권4호
    • /
    • pp.285-296
    • /
    • 2014
  • Although the problems of the algal blooms have been world-widely observed in freshwater, estuary, and marine throughout the year, it is not yet certain what are the basic causes of such blooms. Consequently, it is very difficult to predict when and where algal blooms occur. The constituents of the Asian dust are in a good agreement with the elements required for the algal growth, which suggests some possible relationship between the algal blooms and the Asian dust. There have been frequently algal blooms in drinking water from rivers or lakes. However, there is no any algal blooms in upwelling waters where the Asian dust cannot penetrate into the soil due to its relatively weak settling velocity (size of particles, $4.5{\pm}1.5{\mu}m$), which implies the possible close relationship of the Asian dust with algal blooms. The present initiative study is thus intended firstly in Korea to illustrate such a relationship by reviewing typical previous studies along with 12 years of weekly iron profiles (2001~2012) and two slant culture experiments with the dissolved Asian dust. The result showed bacterial suspected colonies in the slant culture experiment that are qualitatively in a good agreement with the recent Japanese studies. Since the diatoms require cheap energy (8%) compared to other phytoplankton (100%) to synthesize their cell walls by silicate, the present results can be used to predict algal blooms by diatoms if the concentrations of iron and silicate are available during spring and fall. It can be postulated that the algal blooms occur only if the environmental factors such as light, nutrients, calm water surface layer, temperature, and pH are simultaneously satisfied with the requirements of the micronutrients of mineral ions supplied by the Asian dust as enzymatic cofactors for the rapid bio-synthesis of the macromolecules during algal blooms. Simple eco-friendly methods to regulate the algal blooms are suggested for the initial stage of blooming with limited area: 1) to cover up the water surface with black curtain and inhibit photosynthesis during the day time, 2) to blow air (20.9%) or pure oxygen into the bottom of the water and inhibit rubisco for carbon uptake and nitrate reductase for nitrogen uptake activities in algal growth during the night, 3) to eliminate the resting spores or cysts by suction of bottom sediments as deep as 5 cm to prevent the next year germinations.