• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.47-56
• /
• 2020

This study analyzed the recreational scuba diving regulations in Korea and other foreign countries and it proposes five changes to improve the Act On The Safety, Promotion, Etc. Of Underwater Leisure Activities in Korea. First, "recreational underwater activity participant" should be modified to refer to 'an individual or group of individuals entering into a contract with a recreational underwater activity businessperson for their own use'. Second, the person setting up the recreational underwater activity zone should be expanded to 'recreational underwater activity businessperson and/or recreational underwater activity participant'. Third, since recreational technical diving uses nitrox or mixed gas, a clause should be added that a sticker or band clearly indicating the type of gas should be attached. Fourth, a Surface Marker Buoy (SMB) should be added to the diving equipment, and the daily management and maintenance of cylinders should be specified in detail. Fifth, it is necessary to specify in the Act that recreational underwater activity participants are encouraged to purchase diving insurance for their own use. In addition, for the safety of underwater activity participants, the Act must specifically state the emergency procedures and diving guidelines of a recreational underwater activity businessperson.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.241-246
• /
• 2020

In this paper, we propose a neural network model to converge the marine electric propulsion system and deep learning algorithm to predict the DC/DC converter output current in the electric propulsion regeneration system and to predict the battery charge during regeneration. In order to experiment with the proposed neural network, the input voltage and current of the PCM were measured and the data set was secured on the prototype PCM board. In addition, in order to improve the learning results in the insufficient data set, the scale of the data set was increased through data fitting and its learning was executed further. After learning, the difference between the data prediction result of the neural network model and the actual measurement data was compared. The proposed neural network model effectively showed the prediction of battery charge according to changes in input voltage and current. In addition, by predicting the characteristic change of the analog circuit constituting the DC/DC converter through a neural network, it is determined that the characteristics of the analog circuit should be considered when designing the regeneration system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.275-289
• /
• 2022

New businesses such as marine leisure and floating construction have recently flourished on the coast. As a result, consideration is given to a floating structure appropriate for marine environments. In this study, we applied a damping plate to increase the stability of a hybrid floating structure that was expanded by vertical and horizontal stacking of mobile unit modules. In the numerical analysis using ANSYS AQWA, the behavioral characteristics of the floating structure were analyzed according to the length change of the damping plate. However, the wave forces acting on a floating structure are excessively calculated by the resonance of fluid surrounded by the structure in the numerical analysis using potential flow. Therefore, we used the damping zone option of the ANSYS AQWA in the frequency domain analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.241-242
• /
• 2009

There are marry ships and marine structures and also has marry differences on according to the shape and the interval of hulls to the purpose. the multi-submerged body needs appropriate distance between the hulls because of the optimum hull form. thus, through this paper, the flow characteristics behind the multi-submerged body according os the distance ration between the hulls and various angles of attack was conducted.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.6
• /
• pp.419-424
• /
• 2017

Unlike other leisure boats, a sailing yacht is propelled by wind power using sails that are controlled by the crew. Therefore, the ergonomic design of the equipment that the crew has to operate for sailing might be very important. However, it is difficult to find design rules and regulations for the equipment arrangement of a sailing yacht based on ergonomics. In this study, the arrangement design for the height and side plate angle of a winch for a sailing yacht was examined from an ergonomic design point of view. In a simulation, a Korean male in his 20s was selected as a human model for a grinder. The physical load was analyzed when he was operating a winch using a 3D human simulation. The lower back load showed the highest value when using the grinder at $90^{\circ}$ and $180^{\circ}$. Based on the results for the lower back load when using the grinder with various winch heights, it is suggested that the winch height from the cockpit floor to the top of the winch should be more than 40% of the height of the human operator. In addition, according to the results for the lower back load with various horizontal distances from the body, it is suggested that the side plate angle should be less than $16^{\circ}$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.834-840
• /
• 2019

Recently, due to increased tourism and leisure activities, falls by fishers from coastal wave-dissipating blocks (breakwaters) in Korea have been rising. We investigated the optimal mesh size for use in safety nets designed to cover Tetrapod (TTP) breakwaters to prevent casualties from falls. This is a prerequisite for considering the scale and economics of safety net facilities. The optimal mesh size was determined based on the fisher gender and age, and the bodily features of Koreans. The optimal mesh size was found to be 18.6-27.0 cm, derived based on the femoral length and chest circumference.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.145-150
• /
• 2006

This paper proposes an analysis to image of Inchon port using fuzzy theory. After analysis, positive opinion is mean membership function 0.73 and positive membership function 0.27, negative opinion is mean membership function 0.69, negative membership function 0.31 about Inchon port development. therefore, for port development need to accomodation of each opinion positive opinion is maximum decrease from 20 age to 30 age. and negative opinion is maximum increase from 10 age to 20 age. According to the results, port development need to high positive image as leisure and development of waterfront and low negative image as integrated port management and strategy of considered environment port.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.93-104
• /
• 2021

In the process of the sustainable development of the world economy, the change and construction of urban living environment has always been the focus of people's attention. Therefore, the purpose of this study is to find out the potential safety hazards in residential areas, and put forward feasible improvement plans under the framework of CPTED theory.One is to collect the necessary literature. Secondly, according to the field investigation and questionnaire survey, sorting out the existing security risks. Finally, this paper puts forward the corresponding improvement and suggestion to this research. The conclusion is as follows: First, based on the six principles of CPTED theory, problems existing in Gamcheon Cultural Village, which is subject to research, were investigated. Second, six of the most serious safety issues (safety handle, landscaping, entrance control, signs, empty space, monitoring) were objectively analyzed, and designs were presented in terms of increasing safety stairs, installing automatic entrances, open access view, unifying signs, and building leisure areas.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.385-386
• /
• 2010

The ship's seakeeping performance in the pitching and roll motion was felt tired. These gives structural loads to loaded with cargo and hull facilities. Be to improve, small catamaran power yacht designed a data for ship research and ship's hull form to be decided. In this study, based on domestic release for coastal marine environment in the interpretation criteria were chosen based on the exercise performance. The seakeeping performance of marine leisure catamaran was based on voyage speed. The seakeeping performance estimates based on the encounter angle, the wave of the encounter frequency response amplitude ratio for exercise was assessed in the high performance area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.77-82
• /
• 2005

Previously sailing yachts or leisure yachts were mainly made from FRP(Fiber glass reinforced plastic) in the small shipbuilding, but recently there is a trend to replace it for steel or aluminum to substitute FRP for environmental friendly materials. Although It have to need a many checked item in case of hull girder strength and transverse strength normally evaluate base on calculation of class guideline so called direct calculation method. Otherwise. this method of initial structural design considered enough for safety margin on the structure. But, case of small craft must consider for evaluating local strength through rational method. In this paper, check the bow structure members for satisfying results base on allowable stress criterion of damaged bow structure by dynamic load due to slamming and bottom impact load due to pitching motion through finite element analysis. and investigate engine bed structure considering engine weight load and transverse wave load.