• 해양환경안전학회지
• /
• 제16권4호
• /
• pp.407-414
• /
• 2010

명량수도 인근에 위치한 율도와 송도 해역의 항로는 통항분리대와 항로표지에 의해 잘 정비되어 있다. 그러나 율도 해역은 해상교통이 교차하고 있을 뿐만 아니라 항해에 잠재적 위험성이 있다. 안개 등의 기상 현상, 서측 통항대를 이용해야 하는 선박의 대부분이 동쪽 통항대를 이용하여 혼잡을 야기하기 하고 있으며, 율도의 위치와 높이로 인해 시야를 가리고 있기 때문이다. 이 논문은 통항분리대를 개선하여 수역에서의 항행을 효과적으로 가이드 하고자 한다. 이 연구에서는 지난 5년간의 환경 여건과 72시간 동안의 해상교통조사를 실시하고, 항해 위험과 해양사고를 도출하며, 그 결과를 분석하여 통항분리대개선을 위한 기초 자료로 사용한다. 통항분리대 개선안에 대해 ES 모델 지표를 사용한 해상교통류시뮬레이션과 전기능 선박조종시뮬레이션을 이용하여 평가한다.

• 해양환경안전학회지
• /
• 제1권1호
• /
• pp.9-25
• /
• 1995

Although the studies carried out in recent years have provied much new information about channel widths and alignment, they are not consistent in their results. In addition, as a result of variations in local condition and type of traffic accommodated, the dimensions of the channel widths vary over a wide range. Therefore, the recommendation made by the maritime engineering organizations over the world, do not offer detailed and decisive optimal design criteria and are all different. It, therefore, was attempted in this paper to draw a decisive guideline on the optimal widths and alignment of the navigational channels, which can be utilized by the port designers at the stage of the planning. The guideline was drawn through the comparison and analysis of the existing guidelines of the U.S.A, Japan and PIANC and simulation experiment. The simulation experiment was carried out using the "Off Line Port and Waterway Design Simulator" to find the optimal dimensions of the widths of the navigational channels. 90 different simulation runs were conducted at the 3 different secenario channels. New guidelines, the result of the study, is expected to be used usefully by the Korean port designers when designing the rapodly developing ports in Korea. in Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.57-65
• /
• 2008

The characteristics of soot deposition on the cold wall in laminar diffusion flames have been numerically analyzed with a two-dimension with the FDS (Fire Dynamics Simulator). In particular, the effects of surrounding air temperature and wall temperature have been discussed. The fuel for the flame is an ethylene ($C_2H_4$). The surrounding oxygen concentration is 35%. Surrounding air temperatures are 300K, 600K, 900K and 1200K. Wall temperatures are 300K, 600K and 1200K. The soot deposition length defined as the relative approach distance to the wall per a given axial distance is newly introduced as a parameter to evaluate the soot deposition tendency on the wall. The result shows that soot deposition length is increased with increasing the surrounding air temperatures and with decreasing the wall temperature. And the numerical results led to the conclusion that it is essential to consider the thermophoretic effect for understanding the soot deposition on the cold wall properly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.887-893
• /
• 2010

기관실 시뮬레이터에서 3상유도전동기에 대한 모델링을 단순하게 처리하는 경우에는 왜곡된 특성에 의해 각종 전기 기계적 모의 성능 수준이 크게 저하된다. 한편, 전동기 특성을 1, 2차 측 파라미터로 구분하는 기존의 등가회로 방식들은 복잡한 실험을 거치거나 상세 기술 자료가 확보되지 않고는 현장 전동기에 대한 회로에서의 파라미터 값들을 확정하지 못한다는 점에서 정격제원 정도만 주어지는 기관실 시뮬레이터의 개발 작업 환경에서는 사용할 수가 없다. 이러한 문제의 해결을 위해 본 논문에서는 최소 파라미터에 의한 전원 직결의 2 회로정수 방식 등가회로를 제시하였으며 이로부터 정격제원에 의해 회로정수가 결정되기까지의 조건과 과정 및 관련 식들을 해석하였다. 또한 실제 전동기에 이를 적용하여 얻어지는 특성곡선들을 통해 임의의 전동기에 대한 근사특성과 실용성을 확인하였다.

• 한국항해항만학회지
• /
• 제33권9호
• /
• pp.609-614
• /
• 2009

The traffic of tug/barges which are carrying construction materials, large plants for harbor development, or offshore structures has recently increased in the coast of Korea. The west and south coast of Korea are always congested due to a lot of islands and traffic concentration. Specially tug/barges have higher probability of marine accidents due to their bad maneuverability than others. Considering the operational circumstance and maneuverability, this study was to develop a wide-area monitoring and control system for tug/barges in the coastal area of Korea. The system was made in the form of three program modules i.e. navigation analysis program module, monitoring and control program module, database module. And seven functions were programmed to monitor and control the tug/barges efficiently. These are ship information search, tug/barge information and track management, designated area and safe navigation zone management, fairway management, accident data management, warning of danger, safety information management.

• 한국항해항만학회지
• /
• 제31권4호
• /
• pp.309-315
• /
• 2007

We've investigated the characteristics on mariner's behavior in the collision situation through a full-mission ship handling simulator and considered that it's necessary to model the standard avoiding behavior of mariners in order to apply the obtained results more widely and effectively. Thus we described the contents of standard avoiding behavior taken by mariners in the collision situation and established the concept of the standard model based on human factors for collision avoidance in a previous study. As a following study, this paper is to propose the method of modeling on mariners' standard behavior for collision avoidance by analyzing the contents of mariner's information processing and the related factors using regression analysis. As a result, we confirmed the influence of relating factors to avoiding behavior in mariner's deciding decisions and proposed the modeling method of mariners' standard behavior for collision avoidance with a example of recognition model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권6호
• /
• pp.582-588
• /
• 2013

고체산화물형 연료전지는 높은 효율과 친환경적 특성을 가지고 있어 선박에 의한 대기 오염의 주 원인인 디젤 엔진을 대체할 수 있는 동력원으로 주목 받고 있다. 고체산화물형 연료전지의 높은 작동 온도는 고효율과 다양한 연료를 사용할 수 있고 고가의 촉매를 사용하지 않아도 되지만 고열에 의한 시스템의 손상이 발생할 수 있다. 따라서 고성능과 신뢰성을 확보하기 위해 온도제어기가 설계되어야 하고 시스템에 적용하기 전 제어기의 성능이 검증되어야 한다. 본 연구에서는 많은 비용과 시간을 필요로하는 전통적인 제어기 성능 검증 방식 대신에 Hardware-In-the-Loop Simulation 방식을 활용한 성능 검증 시스템을 개발하였고 고체산화물형 연료전지 시스템에 대한 온도제어기의 성능을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.306-311
• /
• 2015

근래 해적에 의한 선박 피랍이 전 세계적으로 큰 문제가 되고 있다. 2011년 1월 20일 "삼호 주얼리호"의 경우 해군은 창군 이래 처음으로 공해상에서 해적과 교전하여 선원 21명 모두를 구출하는 쾌거를 이루어냈다. 또한, "한진 텐진호"의 경우, 전 선원이 선원대피처로 신속하게 대피하여 모두 안전하게 해군에 의해 구출되어 선원대피처의 필요성이 강조되었다. 이와 같이 우리나라 선박들이 해적에 의해 피랍되는 경우가 늘어나면서 해적의 위험으로부터 벗어날 수 있는 다양한 방법이 연구되고 있다. 정부는 2011년 1월 선박설비기준을 일부 개정하여 선원대피처를 지정된 위험해역을 항해하는 모든 선박에 설치하도록 강제화하였다. 따라서 이 연구에서는 선박 피랍의 위험상황 발생 시 선원대피처에 인명 안전성을 제고하기 위한 구조 개선 및 설비 구축에 대해 FDS를 이용한 화재시뮬레이션을 통해 분석하였으며 기존의 구조에서 선원피난처의 높이 증가 및 스프링클러 설치가 인명안전에 도움이 되는 것으로 분석되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.129-138
• /
• 2004

Recently, maintenance of clean ocean is very important issue. One part of the issue strongly relates to the safe navigation of vessels. Most parts of safe navigation depend on the mariner's competencies. STCW was established to guarantee the sufficient mariner's competencies. However the code dose not indicate the each necessary competency clearly. Therefore, the understandings on STCW are not same among training institutes, and each training institute interprets them individually and executes them. As a result, it makes big differences among the institutes concerning training methods and contents and the assessment on mariner's competencies. The countries in EU have paid attention on this issue and the activities enhance the rational assessment of competencies through METNET. In order to execute the rational assessments, it is necessary to clarify the techniques being assessed. And it means the necessity to clarify the necessary techniques for safe navigation and to assess the competencies to achieve them, and then we can attain the objectives of STCW. In this paper, the necessary techniques for achievement of safe navigation are discussed and the methods of assessment of competencies are proposed. As we apply proposed assessment system, we can get the mariner's competency quantitatively and continuously through training period. Then we can know the trend of the competency that is the learning process. By clarifying the learning process of the techniques, we can decide the necessary training time to achieve the competencies. Furthermore, we can discuss the issues on conversion between training onboard and simulator used training by analysing the learning processes.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.377-400
• /
• 2016

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.