• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.699-706
• /
• 2015

This paper presents results of one-year monitoring on prestressing force of a 7-wire steel post-tensioning strand which is installed in a UHPC(ultra high performance concrete) bridge with 11.0 m long, 5.0 m wide, and 0.6 m high by using a FBG-encapsulated 7-wire steel strand. The initial prestressing forces and the prestress changes during a vehicle load test were measured using the FBG-encapsulated strand. The results show that the FBG-encapsulated 7-wire strand is very effective for monitoring the prestress forces even the change in the tension force is very small. Additionally, it was indicated that selection of the thermal expansion coefficient which is used for the temperature correction shall be carefully carried out.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.276-283
• /
• 2018

Climate changes consistently cause coastal accidents such as coastal flooding, so the studies on monitoring the marine environments are progressing to prevent and reduce the damage from coastal accidents. In this paper, we propose a new method to predict the sea level which can be applied to coastal monitoring systems to observe the variation of sea level and warn about the dangers. Existing sea level models are very complicated and need a lot of tidal data, so they are not proper for real-time prediction systems. On the other hand, the proposed algorithm is very simple but precise in short period such as one or two hours since we use the measured data from the sensor. The proposed method uses Kalman filter algorithm for harmonic analysis and double exponential smoothing for additional error correction. It is shown by experimental results that the proposed method is simple but predicts the sea level accurately.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1868-1878
• /
• 2016

This paper proposes a novel velocity estimator for long-term underwater navigation of autonomous underwater vehicles(AUVs). Provided that an external position fix is not given, a viable goal in designing a underwater navigation algorithm is to reduce the divergence rate of position error only using the sporadic velocity information obtained from Doppler velocity log(DVL). For such case, the performance of underwater navigation eventually depends on accuracy and reliability of external velocity information. This motivates us to devise a velocity estimator which can drastically enhance the navigation performance even when the DVL measurement is unavailable. Incorporating the Gertler-Hagen hydrodynamics model of an AUV with the measurement models of velocity and depth sensors, the velocity estimator design problem is resolved using the extended Kalman filter. Different from the existing methods in which an AUV simulator is regarded as a virtual sensor, our approach is less sensitive to the model uncertainty often encountered in practice. This is because our velocity filter estimates the simulator errors with sensor aids and furthermore compensates these errors based on the indirect feedforward manner. Through the simulations for typical AUV navigation scenarios, the effectiveness of the proposed scheme is demonstrated.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1101-1109
• /
• 2012

Accelerometers play a key role in the structural assessment. However, the current electric type accelerometers have certain limitations to apply some structures such as heavy cabling labor, installed sea structure and sensitivity to electromagnetic fields. An optical Fiber Bragg Grating (FBG) accelerometer has many advantages over conventional electrical sensors since their immunity to electromagnetic interference and their capability to transmit signals over long distance without any additional amplifiers, and there is no corrosion from sea water. In this paper, we have developed a new FBG-based accelerometer. The accelerometer consists of two cantilevered type beams and a mass and two rollers. A bragg grating element is not directly glued to a cantilever to avoid possible non-uniform strain in the element. Instead, the bragg grating element will be attached to rotation part that rolled inducing vertical movement of the mass and support cantilever beams so that the bragg grating element is uniformly tensioned to achieve a constant strain distribution. After manufacturing, we will prove the performance and the natural frequency of the accelerometer through the experiment with a vibration shaker. The FBG-based accelerometer is developed for measuring the vibration not exceeding 50 Hz for the marine and civil structures.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.191-193
• /
• 2003

Temporal and spatial variability of phytoplankton pigment concentrations around the Korea Peninsula was described, using the monthly mean composite images of the SeaWiFS (Sea-Viewing Wide Field-of-View Sensor). The high pigment concentrations appear in the spring and fall in the East Sea The spring bloom in the southern regions (in April) occurs one month in advance in comparison with tint in the northern regions (in May). In summer season, the pigment concentrations are low all over the region in the East Sea And the high pigment concentrations exist yearly around warm stream along the coast of the East Sea, and in the coast of the West Sea and South Sea In particular, the high pigment concentrations linking near the mouth q the Yangze River to coast of South Sea in Korea appear during August to December.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.11-14
• /
• 2006

We present an overview on the observation and research for the China seas using both field experiments and multi-sensor satellite data at ORSI/OUC, covering two topics: (1) Spatial and temporal distribution of internal waves in the China Seas and retrieval of internal wave parameters; (2) Retrieval, validation, and cross-comparison of multi-sensor ocean color data as well as ocean optics in situ experiments in the East China Sea. We also present an incoherent Doppler wind lidar, developed by ORSI, and its observation for marine-atmospheric boundary layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.563-572
• /
• 2020

Tidal flats provide important indicators that inform the condition of the environment, so we need to monitor them systematically. Currently, the projects to monitor tidal flats by periodically observing the creatures in tidal flats are underway. Still, it is done in a way that people observe directly, so it is not systematic and efficient. In this paper, we propose a background modeling method for tidal flat images that can be applied to a system that automatically monitors creatures living in tidal flats using sensor network technology. The application of sensor network technology makes it difficult to collect enough images due to the limitation of transmission capacity. Therefore, in this paper, we propose a method to effectively model the background and generate foreground maps by reflecting the characteristics of tidal flat images in the situation where the number of images to be used for analysis is small. Experimental results show that the proposed method models the background of a tidal flat image easily and accurately.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.301-311
• /
• 2016

This paper describes the whole procedures to determine ice-induced global loads on the ship using measured full-scale data in accordance with the method proposed by the Canadian Hydraulics Centre of the National Research Council of Canada. Ship motions of 6 degrees of freedom (dof) are found by processing the commercial sensor signals named Motion Pak II under the assumption of rigid body motion. Linear accelerations as well as angular rates were measured by Motion Pak II data. To eliminate the noise of the measured data and the staircase signals due to the resolution of the sensor, a band pass filter that passes frequencies between 0.001 and 0.6 Hz and cubic spline interpolation resampling had been applied. 6 dof motions were computed by the integrating and/or differentiating the filtered signals. Added mass and damping force of the ship had been computed by the 3-dimensional panel method under the assumption of zero frequency. Once the coefficients of hydrodynamic and hydrostatic data as well as all the 6 dof motion data had been obtained, global ice loads can be computed by solving the fully coupled 6 dof equations of motion. Full-scale data were acquired while the ARAON rammed old ice floes in the high Arctic. Estimated ice impact forces for two representative events showed 7e15 MN when ship operated in heavy ice conditions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.597-604
• /
• 2013

Underwater acoustic sensors are significantly damaged from underwater explosion. The damage that affects sensor should be evaluated for its smooth operations and safety. For satisfying these objectives, it is necessary to obtain more accurate values of the pressure and the energy flux density by distance. This paper is divided into two part. First, to obtain more accurate value of the pressure and the energy flux density at each point, the simulation results and the reference values were compared. For fitting to the reference pressure and the reference energy flux density, the sizes of fluid and TNT model are corrected, and the comparison results show good agreements. Second, based on these results, the structural integrity of underwater sensor structure was analyzed when TNT located in 10 meters from underwater sensors structure. This simulation used the commercial software MSC/DYTRAN.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.191-195
• /
• 2008

In Ansan (the headquarter of KORDI ; Korea Ocean Research & Development Institute), KOSC(Korea Ocean Satellite Center) is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2009. The basis equipment of KOSC(Electric power, Network, Security) has been constructed in 2007. KOSC is being constructed data processing and management system, GOCI L-band reception system, etc. The final object of KOSC is that maximize the application of GOCI.