• Journal of Veterinary Clinics
• /
• v.41 no.1
• /
• pp.24-29
• /
• 2024

A 6-year-old spayed female French Bulldog presented with a left-sided chest wall tumor. Physical examination revealed that the tumor was firmly adhered to the chest wall. A preoperative punch biopsy of the tumor revealed a grade 2 soft tissue sarcoma (STS). On computed tomography, the tumor's dimensions were assessed as 6.5 × 5.7 × 3.5 cm, and it exhibited invasiveness near the tissue surrounding the ninth rib. The tumor size was large in comparison to the dog's chest wall area. Hence, if the traditional wide-margin resection surgery were to be performed, primary wound closure seemed impractical and could potentially result in respiratory function complications. Therefore, considering the extent of tumor invasion and grade, deep margins were established to include the removal of the eighth to tenth ribs, and a 1-cm lateral margin was designated to enable primary wound closure. To reconstruct the chest wall, polypropylene mesh was attached to the adjacent ribs and the remaining muscles were sutured and covered over the mesh. The dog exhibited a rapid recovery beginning the day after the operation. Postoperative biopsy confirmed that the tumor was a grade 2 STS, and the surgical margins were evaluated as incomplete. The owner chose to pursue follow-up observation instead of chemotherapy. In this study, the surgical approach was chosen based on the importance of functional recovery after surgery. Recent research indicates that the tumor grade is more critical for postoperative prognosis than the extent of surgical margins when removing an STS.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.77-90
• /
• 2015

BACKGROUND: The field margins, which are uncultivated area of permanent vegetation located adjacent to field, play an important role in enhancing biodiversity in the agricultural ecosystem. This study focused on floristic characteristics on dry field margins in Korea Peninsula. METHODS AND RESULTS: This study was conducted at margins of 196 dry fields in 32 areas in 8 provinces in May and September 2013. The vascular plants of the dry field margins were listed 347 taxa which contain 73 families, 219 genera, 311 species, 1 subspecies, 30 varieties and 5 forms. Of these 347 taxa, 48 taxa were woody plants and 299 taxa were herbaceous plants. Among total 73 families, Compositae (17.6%) was the most dominant family, and followed Gramineae (15.9%), Polygonaceae (5.8%), Leguminosae (4.9%) and Cyperaceae (3.8%). Based on relative frequency values of survey fields, the appearance frequency of Digitaria ciliaris (89.8%) was the highest, and followed Acalypha australis (86.2%), Artemisia princeps (82.1%), Commelina communis (80.6%) and Portulaca oleracea (80.6%). Disturbance index of dry field margins was 55.0% at national level, and Gangwon region was the highest among the 8 regions at regional level. Life form spectrum was determined to be $Th-R_5-D_4-etype$. CONCLUSION: These results will be used fundamental data for studies to improve or even stabilize the current state of plant biodiversity in agricultural environments.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.619-627
• /
• 2008

The objective of this study was to compare the microleakage of five adhesive systems in the enamel and dentin of permanent teeth. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 25 extracted human molar teeth. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM), Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL) and G-Bond (GB). The results were as follows: 1. At the enamel margins, PL showed the highest leakage value(0.85), and others showed values of SB(0.55), GB(0.50), SM(0.35) and SE(0.25) in decreasing order. There were statistically significant differences in PL vs. SM and PL vs. SE(p<0.05). 2. At the dentin margins, GB showed the highest leakage value(2.10), and others showed values of SE(1.45), PL(1.40), SB(1.05), SM(0.70) in decreasing order. There were statistically significant differences in GB vs. SB and GB vs. SM(p<0.05). 3. Dentin margins showed high dye penetration rate than enamel margins in all material tested groups and there were statistically significant differences for SE, PL and GB.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Journal of the Korean Society of Radiology
• /
• v.83 no.1
• /
• pp.112-126
• /
• 2022

Purpose To determine the value of 3 Tesla (T) MRI texture analysis for predicting tumor margin infiltration in soft tissue sarcomas. Materials and Methods Thirty-one patients who underwent 3T MRI and had a pathologically confirmed diagnosis of soft tissue sarcoma were included in this study. Margin infiltration on pathology was used as the gold standard. Texture analysis of soft tissue sarcomas was performed on axial T1-weighted images (WI) and T2WI, fat-suppressed contrast-enhanced (CE) T1WI, diffusion-weighted images (DWI) with b-value of 800 s/mm², and apparent diffusion coefficient (ADC) was mapped. Quantitative parameters were compared between sarcomas with infiltrative margins and those with circumscribed margins. Results Among the 31 patients with soft tissue sarcomas, 23 showed tumor margin infiltration on pathology. There were significant differences in kurtosis with the spatial scaling factor (SSF) of 0 and 6 on T1WI, kurtosis (SSF, 0) on CE-T1WI, skewness (SSF, 0) on DWI, and skewness (SSF, 2, 4) on ADC between sarcomas with infiltrative margins and those with circumscribed margins (p ≤ 0.046). The area under the receiver operating characteristic curve based on MR texture features for identification of infiltrative tumor margins was 0.951 (p < 0.001). Conclusion MR texture analysis is reliable and accurate for the prediction of infiltrative margins of soft tissue sarcomas.

• Agribusiness and Information Management
• /
• v.9 no.2
• /
• pp.1-11
• /
• 2017

Introduction: To analyze the impact of marketing losses on efficiency in transacting banana in Kurnool district of SRZ in Andhra Pradesh and to assess the opinions of the farmers on the constraints in transacting banana. Research back ground, Materials and Methods: The study relies exclusively on primary information obtained from the banana farmers of Kurnool District. Purposive sampling procedure was followed for the selection of the study area. Top two mandals in the district and top two villages in each mandal are selected in accordance with the area under cultivation of banana. Probability proportion to size was followed regarding the selection of sample farmers and accordingly 60 marginal, 37 small and 23 other farmers were selected and thereby, the total sample size was 120. Result and Discussion: Three marketing channels were identified in the marketing of banana in Kurnool district viz., Producer ${\rightarrow}$ Local-exporter ${\rightarrow}$ Wholesaler ${\rightarrow}$ Retailer ${\rightarrow}$ Consumer (Channel-I), Producer ${\rightarrow}$ Wholesaler ${\rightarrow}$ Cart-vendor ${\rightarrow}$ Consumer (Channel-II) and Producer ${\rightarrow}$ Juice-holder ${\rightarrow}$ Consumer (Channel-III). With the inclusion of marketing losses in the price spread analysis of banana in all the three channels, the marketing costs of all the intermediaries were increased and thereby, the farmer's share in consumer's rupee and Net Marketing Margins of the agencies are on the decline. So, without inclusion of marketing losses, the farmer's share in consumer's rupee and Net Marketing Margins of all the agencies are overvalued. The higher the marketing losses, the more is the negative impact on farmer's net selling price, net marketing margins of the intermediaries and marketing efficiency. The sample farmers are facing major problems in marketing of banana like frequent price fluctuations, unorganized marketing and lack of transportation facilities on priority basis. Suggestions: It is suggested to educate the farmers regarding the optimum maturity index for harvest, use of mechanical harvesters, proper placement of fruits during storage and ripening, better packaging and cushioning technologies to absorb shocks during transportation, strengthening of storage facilities and transport facilities, encourage co-operative marketing etc., to promote marketing efficiency of banana in the study area.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.282-289
• /
• 2006

The purpose of this study was to compare the ability of three resin surface sealants to prevent microleakage in Class V composite resin restorations. Forty Class V cavities with the occlusal margin in enamel and gingival margin in dentin were prepared on the buccal surfaces of sound extracted molars, and restored with composite resin. Restorations were randomly assigned into one of four equal groups (n = 10): a control group, without resin sealing, and three experimental groups in which margins were sealed with Fortify Plus, Biscover and Permaseal, respectively. Specimens were thermocycled, immersed in a 2% methylene blue solution for 4 hours, sectioned longitudinally, and observed the leakage at the occlusal and gingival margins. The result was analyzed using Kruskal-Wallis test, Mann-Whitney test and Wilcoxon signed rank test. In conclusion, the ability to reduce microleakage at occlusal margins was similar in all of three sealants. However at gingival margin, it depended on the type of used resin surface sealant. At gingival margin. control and Fortify Plus group showed statistically higher microleakage than PermaSeal group. and Fortify Plus group also showed higher microleakage than BisCover group (p < 0.05).

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.202-205
• /
• 1988

Several sufficient condition which guarantee the stability of linear state delay systems are derived. And the delay margin which guarantees the stability of the delay systems are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.477-482
• /
• 1989

In this paper, the effect of coefficient quantization error is analyzed for digital PID controllers. Stability margins are used as peformance criteria, and the statistical wordlength concept is adopted for coefficient wordlength selection. Finally, an illustrative example is given.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.719-720
• /
• 2005