• Journal of Periodontal and Implant Science
• /
• 제53권2호
• /
• pp.99-109
• /
• 2023

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption. Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data. Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm). Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권1호
• /
• pp.73-79
• /
• 2000

A material of 48 patients with 60 avulsed and replanted permanent teeth were followed retrospectively in the period of 1996. 1 to 1998. 12 (mean observation period=1year 7months). The age of the patients at the time of replantation ranged from 9 to 63 years (mean=24 years). Clinical records of patients were reviewed to obtain valid data concerning the extent of injury and treatment provided. Pulpal and periodontal healing states were examined with periapical x-rays and clinical examination procedures (i.e. percussion test and mobility test) at their recall visit. Root ankylosis was found in fifty-two teeth(87%) and root resorption in twenty-four(40%). Only two of the replanted teeth(3%) showed partial regeneration of the periodontal ligament. Six teeth(10%) resulted in tooth loss, but the remaining fifty-four were clinically well functioning. Most of teeth have mild marginal bone loss accompanied by gingival retraction without pathological periodontal pockets. The incidence of root resorption was much higher in younger age group. However, it was not affected by the interval between avulsion and replantation, the condition of supporting tissues, the degree of root formation and the type of splinting, indicating that multiple factors involved in determining the prognosis of replanted teeth. Based on these findings, avulsed teeth in unfavorable conditions (i.e. long extra-alveolar periods, etc.) should be preserved if possible.

• 구강회복응용과학지
• /
• 제28권2호
• /
• pp.201-212
• /
• 2012

임플란트 주위조직과 치아 주위조직은 조직학, 형태학적으로 유사한 면이 있다. 특히 functional ankylosis라 불리는 티타늄과 연조직의 직접적인 상피부착은 치아주위 조직의 접합상피처럼 염증세포의 치근단으로의 이행 및 그로 인한 골흡수를 막는 역할을 한다. 그러나 반복적인 지대주의 착탈은 임플란트 주위 연조직의 mucosal barrier를 파괴하여 골흡수를 야기할 수 있다. 만일 지대주의 반복적인 착탈 없이 수술 시에 보철 지대주를 채결한다면 골흡수의 양을 줄일 수 있을 것이다. 이는 기존의 수술방법으로는 한계가 있었으나 Cone Beam Computed Tomography(CBCT)를 이용한 guided surgery를 이용함으로써 임플란트 식립의 3차원적 정확성의 비약적인 향상으로 이런 술식이 가능하게 되었다. 본 증례는 정밀한 CBCT를 통한 분석 후 지르코니아 맞춤 지대주를 미리 제작하고 수술 시에 즉시 지대주와 임시보철물을 연결한 경우로 임상적으로 만족할만한 결과를 얻어 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제48권3호
• /
• pp.215-223
• /
• 2010

연구 목적: 이 연구는 임플란트 식립 시 미세나사가 변연골에 발생시키는 스트레인을 조사하여, 변연골의 골유착에 장애를 줄 수 있는 골의 과부하 영역 이 미세나사에 의해 확장되는 양태를 평가하였다. 연구 재료 및 방법: 3종의 임플란트 식립 모델을 삼차원적 유한 요소분석으로 실험하였다. 대조 모델은 미세나사가 없이 주나사만 있는 $4.1{\times}10$ mm 임플란트 (Submerged model, Dentis Co, Daegu, Korea), type I은 미세나사가 있는 straight body, type II는 미세나사가 있는 7% tapered body로 설정하였다. 임플란트가 치밀골을 통과하는 3,600 단계의 식립 과정이 모사되었다. 유한요소 해석에는PC용으로 출시된DEFORM$^{TM}$ 3D (ver 5, SFTC, Columbus, OH, USA)가 사용되었다 결과:임플란트 외벽으로부터 1 mm 이내의 변연골 스트레인 영역은 대조모델에서의 4000 ${\mu}$-strain 보다 높았다. Type I 임플란트의 경우 임플란트 외벽으로부터 1-1.5 mm 영역 이내의 인접골이 과부하 영역에 속하였고, type II 임플란트의 경우에는 2 mm 이상이었다. 결론: 미세나사의 유무와 몸체의 테이퍼 유무에 따라 변연골 스트레인은 직접적인 영향을 받았고 대조모델에 비해 경부 미세나사가 있는 type I 및 type II 임플란트의 식립 시 변연골의 과부하 영역이 월등히 컸다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권3호
• /
• pp.167-173
• /
• 2013

Purpose: The aim of this study is to analyze the series of panoramic radiograph of implant patients using the system to measure peri-implant crestal bone loss according to the elapsed time from fixture installation time to more than three years. Methods: Choose 10 patients having 45 implant fixtures installed, which have series of panoramic radiograph in the period to be analyzed by the system. Then, calculated the crestal bone depth and statistics and selected the implant in concerned by clicking the implant of image shown on the monitor by the implemented pattern recognition system. Then, the system recognized the x, y coordination of the implant and peri-implant alveolar crest, and calculated the distance between the approximated line of implant fixture and alveolar crest. By applying pattern recognition to periodic panoramic radiographs, we attained the results and made a comparison with the results of preceded articles concerning peri-implant marginal bone loss. Analyzing peri-implant crestal bone loss in a regression analysis periodic filmed panoramic radiograph, logarithmic approximation had highest $R^2$ value, and the equation is as shown below. $y=0.245Logx{\pm}0.42$, $R^2=0.53$, unit: month (x), mm (y) Results: Panoramic radiograph is a more wide-scoped view compared with the periapical radiograph in the same resolution. Therefore, there was not enough information in the radiograph in local area. Anterior portion of many radiographs was out of the focal trough and blurred precluding the accurate recognition by the system, and many implants were overlapped with the adjacent structures, in which the alveolar crest was impossible to find. Conclusion: Considering the earlier objective and error, we expect better results from an analysis of periapical radiograph than panoramic radiograph. Implementing additional function, we expect high extensibility of pattern recognition system as a diagnostic tool to evaluate implant-bone integration, calculate length from fixture to inferior alveolar nerve, and from fixture to base of the maxillary sinus.

• 대한치과의사협회지
• /
• 제48권1호
• /
• pp.45-55
• /
• 2010

Purpose: The aim of this study was to evaluate 1 year cumulative survival rate of implants placed on augmented sinus using Osteon$^{(R)}$, bone graft material and to assess height of the grafted material radiographically. Material and Methods: 10 maxillary sinuses were augmented in 10 patients and 25 implant fixtures were installed simultaneously or after 6 months healing period. The height of the sinus graft material was measured using panoramic images immediately after augmentation and up to 19 months subsequently. Changes in the height of the sinus graft material were calculated with respect to implant length and original sinus wall height. Results: The cumulative survival rate was 100% in all 25 implants. Additionally, normal healing process without any complication was observed in all patients. The mean crown/Implant ratio was 1.25. The mean marginal bone loss was 0.95mm and the mean resorption rate of Osteon$^{(R)}$ was 0.05mm/month. The fastest resorption site of Osteon$^{(R)}$ is the first molar area. The grafted material was well maintained in sinus and decreased slightly over 1 year. Conclusion: In conclusion, It can be suggested that Osteon$^{(R)}$ may have predictable result when it was used as a grafting material for sinus floor augmentation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권4호
• /
• pp.275-279
• /
• 2010

Introduction: Guided bone regeneration (GBR) is a common procedure for the treatment of bone defects and bone augmentation. The nonresorbable barriers are well-documented barriers for GBR because of their stability and malleability. However, few GBR studies have focused on the different types of non-resorbable barriers. Therefore, this study examined the clinical results of different non-resorbable barriers for GBR; expanded polytetrafluoroethylene (e-PTFE) (TR-Gore Tex, Flagstaff, AZ, USA), and high-density polytetrafluoroethylene (d-PTFE) (Cytoplast membrane, Oraltronics, Bremen, Germany). Materials and Methods: The analysis was performed on patients treated with GBR and implant placement from January 2007 to October 2007 in the department of the Seoul National University Bundang Hospital. The patients were divided into two groups based on the type of non-resorbable barrier used, and the amount of bone regeneration, marginal bone resorption after prosthetics, implant survival rate and surgical complication in both groups were evaluated. Results: The implants in both groups showed high survival rates, and the implant-supported prostheses functioned stably during the follow-up period. During the second surgery of the implant, all horizontal defects were filled with new bone, and there was no significant difference in the amount of vertical bone defect. Conclusion: In bone defect areas, GBR with non-resorbable barriers can produce favorable results with adequate postoperative management. There was no significant difference in bone regeneration between e-PTFE and d-PTFE.

• Journal of Periodontal and Implant Science
• /
• 제43권4호
• /
• pp.153-159
• /
• 2013

Purpose: The level of the implant above the marginal bone and flap design have an effect on the bone resorption during the healing period. The aim of this study is to detect the relationship between the level of the implant at the implant placement and the bone level at the healing period in the mesial and distal side of implants placed with flapless (FL) and full-thickness flap (FT) methods. Methods: Twenty-two nonsubmerged implants were placed with the FL and FT technique. Periapical radiographs were taken of the patient at implant placement, and at 6 and 12 weeks. By using computer software, bone level measurements were taken from the shoulder of the healing cap to the first bone implant contact in the mesial and distal side of the implant surface. Results: At 6 weeks, the correlation between the crestal bone level at the implant placement and crestal bone level of the FT mesially was significant (Pearson correlation coefficient=0.675, P<0.023). At 12 weeks, in the FT mesially, the correlation was nonsignificant (Spearman correlation coefficient=0.297, P<0.346). At 6 weeks in the FT distally, the correlation was nonsignificant (Pearson correlation coefficient=0.512, P<0.107). At 12 weeks in the FT distally, the correlation was significant (Spearman correlation coefficient=0.730, P<0.011). At 6 weeks in the FL mesially, the correlation was nonsignificant (Spearman correlation coefficient=0.083, P<0.809). At 12 weeks in the FL mesially, the correlation was nonsignificant (Spearman correlation coefficient= 0.062, P<0.856). At 6 weeks in the FL distally, the correlation was nonsignificant (Spearman correlation coefficient=0.197, P<0.562). At 12 weeks in the FL distally, the correlation was significant (Pearson correlation coefficient=0.692, P<0.018). Conclusions: A larger sample size is recommended to verify the conclusions in this preliminary study. The bone level during the healing period in the FT was more positively correlated with the implant level at implant placement than in the FL.

• Journal of Korean Dental Science
• /
• 제5권2호
• /
• pp.54-59
• /
• 2012

Purpose: The purpose of this study was to evaluate the prognosis (clinical outcomes) of one-stage flapless implant surgery based on success and survival rate and marginal alveolar bone loss. Materials and Methods: Ninety dental implants were placed according flapless surgical procedure in forty-one patients at Hospital between April 2004 and May 2009. The mean age of the patients was 54, and the patients were comprised of 24 men and 17 women. Each patient was investigated radiographically and clinically being with average follow up 49.7 period. Result: Average healing period is 4.45 month (maxilla: 5.31 month, mandible: 3.20 month) after installation and survival rate is 95.7% in this period. The survival rate and success rate at 1 year after function (prosthodontics setting) are 92.4% and 88.0%. At final observation, the survival rate and success rate are 90.2% (maxilla: 89.1%, mandible: 92.9%) and 84.8% (maxilla: 82.8%, mandible: 89.3%). The mean residual alveolar bone resorption at 1-year after function and final observation are 0.8 mm and 1.07 mm. Conclusion: Our study suggest that if appropriate surgical technique with proper patients selection, flapless implants surgery is predictable simple and safety technique.

• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.111-121
• /
• 2010

연구목적: 본 연구에서는 임플란트 주변 골흡수 양상의 차이가 임플란트와 주변골의 응력 분산에 미치는 영향을 알아보기 위해 수평 골흡수와 임플란트 주변 수직 골흡수에 있어서 주변골의 응력분산, 생물학적 폭경의 형성과 응력분산의 변화 관계 및 병적인 골흡수시의 주변골 응력분포를 유한요소 분석법을 사용하여 비교하고자 하였다. 연구 재료 및 방법:우측 제1 소구치 전방에서 제2 대구치 후방까지의 하악골 모형에서 자연치를 제거하고 직경 4.0 mm, 길이 10.0 mm의 나사형 임플란트를 제1 대구치 부위에 식립하였다. 수평 수직 골흡수의 차이를 보기 위하여 골흡수가 나타나지 않은 형태를 대조군 (I)으로 하여, 1.5 mm 수평 골흡수 (H1.5), 3.0 mm 수평 골흡수 (H3.0) 모형과 이에 상응하는 수직 골흡수 모형 (VW1.5; 1.5 mm, VW3.0; 3.0 mm)을 설계하였고, 생물학적 폭경의 형성과 응력 변화를 관찰하기 위해 생물학적 폭경이 형성되는 과정을 가정한 모형(B0; 피질골에서 임플란트와의 골유착이 없이 밀접하게 접촉된 상태, B1; 피질골에 0.5 mm 폭의 수직 골흡수가 발생한 상태)과 생물학적 폭경이 형성된 상태 (B2)의 모형을 설계하였으며, 생물학적 폭경이 형성된 상태는 0.5 mm 폭을 가지며 임플란트 장축에 경사진 형태를 가지고 있는 1.5 mm 깊이의 수직 골흡수 상태로 형성하였다. 병적 골흡수 상태는 수직 골흡수를 가정한 기존 모형 (VW1.5, VW3.0)과 골흡수가 더 진행된 VW4.5, 기저부에 피질골화가 이루어지지 못한 VO3.0, VO4.5, VO6.0모형을 추가하였다. 하중조건은 수직, 수평하중 그리고 협측 $45^{\circ}$경사하중을 각각 100 N씩 임플란트 보철물 부위에 가하였다. 결과: 분석결과 수평 골흡수와 수직 골흡수에 있어서 전반적인 응력의 크기와 임플란트에 가해지는 응력의 크기는 서로 대응하는 모형에서 유사하였으며, 수직 골흡수에 서 수직력을 받을 때 C2에서 C4로 1.5 mm의 골흡수가 증가하였으나 골에서 발생한 최대응력은 오히려 감소하였다. 수직 골흡수에서 응력이 결손부의 수직 벽을 통해 상부로 분산되는 것을 볼 수 있었다. 생물학적 폭경 형성 단계에서 응력이 가해지는 경우 피질골에서의 결합이 없는 A2에서 피질골 전반에 높은 응력이 발생하였으며 생물학적 폭경의 완성을 가정한 B1에서는 임플란트와 피질골의 경계에서 발생한 응력이 경사진 피질골을 따라서 퍼져나가고 있음을 보였다. 병적 골흡수에서 골결손부 하방에 피질골이 없는 경우는 골흡수에 비례하여 응력이 증가 하였으나 피질골이 있는 경우에는 응력의 증가가 골흡수량의 증가와 비례하지 않음을 보였다. 결론: 임플란트 주변 골흡수의 양이 같아도 흡수된 형태에 따라 발생하는 응력의 크기와 응력분산이 다르게 나타났으며 초기 골흡수 현상은 피질골과의 결합이 약할 때 이 부위에 응력이 증가되어 나타나며, 이후 응력이 감소되어 평형을 이루는 것으로 보인다. 수직 골흡수가 증가할 경우 피질골의 존재 유무가 응력 분산에 큰 영향을 미치며 피질골이 있는 경우 일정 범위에서 응력의 감소가 나타나 응력분산에 유리한 형태에서 골흡수의 진행을 감소시킬 수 있을 것으로 보인다.