• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.182-186
• /
• 2021

Tone mapping operator is designed to reproduce visibility of real-world scenes such as HDR images on limited dynamic range display devices. This paper presents and implements compare and to estimate some tone mapping algorithms commonly used. The evaluation is performed by applying tone mapping operators on 7 HDR images, and by presenting the results with subjective estimation. Reinhard tone mapping algorithm is the best in the visual experimental results. The goal of this work is to discuss what is visible of high dynamic range on a normal display device and to determine to which better algorithm is. This work motivates us to make more progress through the new proposal of tone mapping operator on future work.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.113-115
• /
• 2010

We studied the methods to utilize vehicle-based mobile mapping system for field investigation work of digital map generation process. Map layers which should be checked by field investigation were analyzed to find the possibility of being checked with data from vehicle-based mobile mapping system. Also new process for digital map generation were suggested to adopt field investigation by vehicle-based mobile mapping system. We performed field investigation work on the Kangneung area by vehicle-based mobile mapping on a trial bases and compared the results with a results from usual field investigation method.

• Journal of the Korean Chemical Society
• /
• v.61 no.1
• /
• pp.12-15
• /
• 2017

We presented a mapping the work function of the vanadium pentoxide ($V_2O_5$) nanonet structures by scanning Kelvin probe microscopy (SKPM). In this measurement, the $V_2O_5$ nanonet was self-assembled via dropping the solution of $V_2O_5$ nanowires (NWs) onto the $SiO_2$ substrate and drying the solvent, resulting in the networks of $V_2O_5$ NWs. We found that the SKPM signal as a surface potential of $V_2O_5$ nanonet is attributed to the contact potential difference (CPD) between the work functions of the metal tip and the $V_2O_5$ nanonet. We generated the histograms of the CPD signals obtained from the SKPM mapping of the $V_2O_5$ nanonet as well as the highly ordered pyrolytic graphite (HOPG) which is used as a reference for the calibration of the SKPM tip. By using the histogram peaks of the CPD signals, we successfully estimated the work function of ~5.1 eV for the $V_2O_5$ nanonet structures. This work provides a possibility of a nanometer-scale imaging of the work function of the various nanostructures and helps to understand the electrical characteristics of the future electronic devices.

• Journal of Radiation Protection and Research
• /
• v.38 no.3
• /
• pp.149-156
• /
• 2013

Recent domestic use of radiations has increased in the number of institutions and companies as well as operating as an investment, a variety of facilities and safety management are becoming increasingly complex. Despite the increase of radiation workers and facilities, the number of RSOs (Radiation Safety Officers) has not increased with a growing domestic radiation industry. The radiation safety management work (radiation workers management, radiation sources management, facilities management etc.) has been managed by insufficient number of the RSOs. These problems could be directly or indirectly related to causes of the radiation accidents. In this paper, we designed the Process Mapping of radiation safety management work for an efficient safety management of the radiation facilities and protection of radiation accidents. To develop the Process Mapping, we analyzed the radiation safety requirements of management issues and the individual procedures. Based on the Process Mapping, the work procedures for an appropriate radiation safety management of each institution can be configured clearly. Through this procedures, the safety risk factors in radiation facilities can be reduced, and the radiation safety management system will be improved. Depending on your needs, the Process Mapping could be modified and could be used for an efficient radiation safety management.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.736-742
• /
• 2014

If an accident occurs at work places that handle 'the accident preparedness substances', it causes more property damage and casualties than accidents of normal chemical substances. Even though various systems and regulations have been operated in order to prevent accidents, techniques for reducing and removing human error, which is one of the main reasons of accidents, are still inadequate. In this paper, hazardous work digitization, potential hazard verification, and work evaluation based on domestic technical guidelines have been performed through a case study of the accident of hydrofluoric acid leakage in Gumi in September 2012, and development of a new risk mapping method has been studied to supplement existing systems.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.442-445
• /
• 2003

The purpose of this study is to present an improved lift-up & procurement work flow for effectiveness of resources increase in building construction. The current lift-up & procurement work flow has some waste factors; complicated information system, connection lack with process and decision-making delay. Therefore the study applied the value stream mapping methodology for improvement of current lift-up & procurement work flow. The main contents of the study are as follows; 1) A problem of current work flow were analyzed through current state mapping(CSM). 2) An improved work flow was suggested through future state mapping(FSM). 3) An improvement effect analysis of information system and lift-up planning The study recommends that continuous improvement of lift-up & procurement work flow and efficient management of information in building construction.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.439-449
• /
• 2011

The characteristics of rock fractures for engineering rock classification are investigated by analyzing three dimensional point cloud generated from adjusted digital images of a tunnel face during construction and the tunnel is reinforced based on the supporting pattern suggested by the RMR and the Q system using parameters extracted from those images. As results, it is possible saving time required from face mapping to tunnel reinforcing work, enhancing safety during face mapping work in tunnels and reliability of both the mapping information and selecting supporting pattern by storing the files of digital images and related information which can be checked again, if necessary sometime in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.133-139
• /
• 2004

The purpose of this study is to present an improved lift-up &procurement work flow for effective resource utilization in building construction. The current lift-up &procurement work flow has some waste factors; complicated information system, connection lack with process and decision-making delay. Therefore the study applied the value stream mapping methodology for improvement of current lift-up &procurement work flow. The main contents of the study are as follows; 1) Problems of current work flow were analyzed through current state mapping(CSM). 2) An improved work flow was suggested through future state mapping(FSM). 3) An improvement effect analysis of information system and lift-up planning was investigated. The study recommends continuous improvement of lift-up &procurement work flow and efficient management of information in building construction as a future research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.611-619
• /
• 2008

2.5D Mapping system that embody in this paper can make new design by doing draping to live various texture and model picture image of fashion clothes by pattern, and can confirm clothes work to simulation without producing direction sample or product directly. Also, the system can support function that can forecast fabric design and state of end article exactly, and the system can bring competitive power elevation of fashion industry and cost-cutting effect by doing draping using database of fabric and model picture image. 2.5D Mapping system composed and embodied by mesh warp algorithm module, light and shade extraction and application module, mapping path extraction module, mesh creation and transformation module, and 2.5D mapping module for more natural draping. Future work plans to study 3D fashion design system that graft together 3D clothes technology and 3D human body embodiment technology to do based on embodiment technology of 2.5D mapping system and overcomes expression limit of 2.5D mapping technology.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.8 no.1
• /
• pp.81-92
• /
• 2004

Muskhelishvili's complex variable method has been applied to derive exact and closed expressions for Gaursat's functions for the first and second fundamental problems of the infinite plate weakened by a curvilinear hole which is conformally mapped on the domain outside the unit circle by means of rational mapping function. The hole having three poles. The previous work of the authers in this domain is considered as special cases of this work.