• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.125-139
• /
• 1993

Korea has successfully achieved a lowered fertility level owing to the strong population control policy and effective family planning program. Along with fertility decline and decreased number of children in family, average number of household members has decreased and nontraditional households such as one person household and households composed of unrelated individuals have prolifirated, even though the absolute number of them are found minimal in Korea. However in recent years several data and survey results suggest that one person households are gradually in the increasing trend. The study aimed at investigating the real state of one person households in Korea and next analyzing the proportional distribution of one person households by a few socioeconomic characteristics, thus providing basic for eatablishing far-singhted population and social welfare policy in the future. Korea has experienced high growth rate of economy through government-led development plans starting from the 1960s. During the past three decades, Korea has shifted from the agricultural state to the industrialized one. In compliance with the economic growth, urbanization and industrialization have brought about rural-to-urban migration and a great bulk of young population migrated to urban areas, who are seeking for educational and job opportunities. Korean society has also been under drastic change in every aspect of life involving norms, tradition, and attitude, etc. Therefore, in spite of the prejudice on 'living alone' still remaining, young people gradually leave parents and home, and further form nontraditional households in urban areas. Current increase in the number of one person households is partly attributable to the increase in high female educational attainment and female participation in economic activities. As the industrial structure in Korea changes from primary into secondary and tertiary industries, job opportunities for service/sales and manufacturing are opened to young female labor force in the process of industrialization. Contrary to the formation of one person households by young people, the aged single households are composed when children in family leave one by one because of marriage, education, employment. In particular, a higher proportion of aged female single households occur in rural areas due to the mortality difference by sex. Based on the data released form the 1990 Population and Housing Census and National Fertility and Family Health Survey in 1985 and 1991, the study tried to examine the state of one person households in Korea. According to Census data, the number of one person households increased to 1, 021, 000 in 1990, comprising 9.0 percent of total households. And the survey reveal that among total 11, 540 households, 8.0 percent, 923 households, are composed of one person households. Generally, the proportion of female single households is greater than that of male ones, and a big proportion of one person households is concentrated in the 25-34 age bracket in urban areas and 65 years and more in rural areas. It is shown than one person householders in urban areas have higher educational attainment with 59.2 percent high schooling and over in 1991, Job seeking proved to be the main reason for leaving home and forming one person households. The number of young female single households with higher education and economic self-reliance are found nil and the study did not allow to analyze the causal realtionship between female education and employment and one person household formation. However more research and deep analysis on the causal facors on one person household formation using statistical method are believed to be necessary.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.23-31
• /
• 2015

With the expiration of main patent of printing method, public interest now has shifted to 3D printing. In this, it needs to shine a light on the negative effects, particularly in the socio-economic aspect of 3D printing. By analyzing the existing research findings, policy reports and press releases, the negative effects of 3D printing and its countermeasures were derived. The main drawbacks of 3D printing includes the following: It might cause 3D printing-related crimes(e.g. printed weapons, intellectual property infringement, etc.) and it poses a big threat to other related business sectors.(e.g. potential job loss in molding and medical equipments manufacturing industries) What's more, the nature of 3D printing that it is easy to operate attracts lots of people, which then leads to serious social and environmental problems-product liability, ethical issues, environmental pollution, and finally government's blindly excessive investment in 3D printing. To avoid such potential risks, the government should establish and enforce the institutional law, and guidelines. Government's rational investment decision is also inevitable for the short-term and long-term sustainability of 3D printing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.892-902
• /
• 2015

Agri-food ICT(Information and Communications Technologies) convergence has been raised as an important issue for agricultural industry competence. In this situation, this study is to enhance agricultural competitiveness and seek to development plan for agricultural corporation by diagnosing informatization level. For this purpose, this study conducted survey on informatization level of 3,019 agricultural corporations and calculated level score. And result is compared with SMEs(Small and Medium Enterprise) informatization survey, including manufacturing and service industries, conducted by Korea Technology & Information Promotion Agency for SMEs in recent agricultural corporations' growing with automation of agricultural production and improving service to customer satisfaction. Evaluation system is established to calculate informatization level score and AHP(Analytic Hierarchy Process) method was used by the experts to investigate weighting of assessment area, assessment indicators, assessment items. As a result, agricultural corporation informatization level score was 40.16 points which is lower than the benefitted organization of agri-food IT convergence modeling(43.44 points). By assessment area, the informatization level of promotional environment area was low and investment and training items were analyzed low especially so need to improve urgently. In the analysis result by organization type, agricultural company corporation's informatization level was higher than the agricultural association corporation and 'Processing and distribution' was higher than others by business type. Informatization level of agricultural corporation is 80 percent of 2013 SMEs' level(50.18 points) and 59.4 percent of a large corporation(67.64 points). In particular, big difference is occurred in investment feasibility analysis, informatization investment and education which will be need to improve.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.65-72
• /
• 2017

APT (Ammonium paratungstate) is widely used in various industries such as metal cutting tools, drill bits, mining tools, and military inorganic materials. In order to produce high purity APT(S), an impurity purification step in an aqueous $Na_2WO_4$ convert $H_2WO_4$ solution is required. It is difficult to remove impurity Na of 200 ppm or less when $H_2WO_4(S)$ is prepared by adding HCl(Aq) to an aqueous solution of $Na_2WO_4$, which is a well-known conventional wet method. However, in this study, a more economical and efficient method of removing Na through electrodialysis using a cationic membrane was studied. A large amount of Na in aqueous solution of $H_2WO_4$ due to $Na_2CO_3(S)$ which was added to dissolve waste tungsten carbide drill and scrap was removed to 20ppm or less through electrodialysis process, and it was confirmed that the effect of Na removal was great when using electrodialysis.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.101-106
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the $\bar{X}$-chart, $\bar{X}$-chart, $\bar{X}$-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart $\bar{X}$-chart. which is the most widely used one in Kora, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for the more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the $\bar{X}$-chart; the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the $\bar{X}$-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based oh a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $\chi$$^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the proposed median chart and the $\bar{X}$ chart was also performed with these examples and the median chart turned out to be superior to the $\bar{X}$-chart.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.627-651
• /
• 1994

In this study, literature review was done to examine and compare the current status and problems of different evaluation approaches toward permanent impairment in Korea. Alternatives and improvements in the current approaches in Korea were suggested. Series of cases were also examined to compare different approaches applied to the real cases, using 105 cases from a hospital data and another 207 cases from a insurance company data. The main findings of the literature review are as follows; 1. The current evaluation methods of permanent impairment in Korea are grouped into two categories, grading and rating. Gradings of impairments are expressly specified in 17 various statutes. 2. In Grading methods, the rigid system of 74 different grades has been adopted uniformally for the convenience of administration, which may not be, appropriate or valid from medical and scientifical aspect. 3. The adventage of McBride method is assessment of occupational disability rate. However the classified compensable occupations are only 280 and limited to manufacturing industries in 1960s'of U.S.A., which is not appropriate to current Korean circumstances. Especially, the job list does not include managerial officers or mental workers. 4. AMA Guides is the scientific and reasonable method for the assessment of physical impairment rate. However compensation and reparation of impairment case is difficult because this method cannot assess the disability rate according to occupation, age, etc. The results of cases comparative study are as follows: 5. The physical Impairment could be compared in 167 out of total 312 cases, and for the cases of complex impairment, McBride method underestimate physical impairment rate compared with AM A method. 6. When disability late was assessed, occupation was considered the compensation of only 85 cases, and age was used in only 21 cases. This was because occupation and age compensation in McBride method are unreasonable. 7. The most Ideal alternative is to assess physical impairment according to AMA method and then to develop a compensation method appropriate for the circumstances of Korea society.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1227-1242
• /
• 2007

This study aims at grasping the influence of antecedents within SCM to information sharing and cooperation as well as the influence of information sharing on cooperation among the small & medium-sized manufacturing industries, thus ultimately opening the way to the study on the influence of major activities such as information sharing and cooperation within SCM on the business performance by classifying such influence into low perspectives of BSC. The results of this study revealed that the antecedents such as commitment and cultural similarities exercised a significant influence on information sharing while mutual trust and the size of a corporate weighing with cooperative activities. It also identified the fact that information sharing bore a significant influence on cooperation in terms of relationships among activities. For the relationships between the SCM activities and performance, cooperation proved significant to all four balanced scorecard performances with little significant influence of information sharing on balanced scorecard performance. However, taking into consideration of the significance of information sharing on cooperation as well as the significant influence of cooperation on balanced scorecard performance, it fumed out that information sharing also effected a indirect influence on such four types of balanced scorecard performance. In this regard, based on the results of this study, it was identified that information sharing and cooperation, major activities within SCM, had either direct or indirect influence, through the influence of antecedents, on the business balanced scoreboard performance measured from a customer perspective, a business process perspective, an innovation and teaming perspective and a financial perspective.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.18-26
• /
• 2016

The semiconductor industry is one of the key industries of Korea, which has continued growing at a steady annual growth rate. Important technology for the semiconductor industry is high integration of devices. This is to increase the memory capacity for unit area, of which key is photolithography. The photolithography refers to a technique for printing the shadow of light lit on the mask surface on to wafer, which is the most important process in a semiconductor manufacturing process. In this study, the width and step-height of wafers patterned through this process were measured to ensure uniformity. The widths and inter-plate heights of the specimens patterned using photolithography were measured using transmissive digital holography. A transmissive digital holographic interferometer was configured, and nine arbitrary points were set on the specimens as measured points. The measurement of each point was compared with the measurements performed using a commercial device called scanning electron microscope (SEM) and Alpha Step. Transmission digital holography requires a short measurement time, which is an advantage compared to other techniques. Furthermore, it uses magnification lenses, allowing the flexibility of changing between high and low magnifications. The test results confirmed that transmissive digital holography is a useful technique for measuring patterns printed using photolithography.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.