• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.105-112
• /
• 1995

This paper presents that model 1 is to show an approach to determining unidirection or bidirection of the optimal flow path design, model 2 is to show the design of an AGV can determine the minimum number of required vehicles. Our purposes of this article are that first, it is easy to see that computationlly advanced efficient procedure with some pairwises of comparision, zero-one integer and northwest rule by using, second, to determine the minimum number of vehicles in the layout for manufacturing facility, we used a coefficient ratio with moved numbers of loaded & unloaded vehicles between stations and available time of AGV's capacity for per shift per vehicle. Example is presented to demonstrate the approach.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.355-363
• /
• 2007

This paper presents a method of an automatic work time evaluation based on the verification of a disassemblability and assembly configuration. Even though a work time evaluation is an important field of concern for planning assembly lay-out, there are some limitations using cumbersome user query or approximated work time data without considering assembly condition. To overcome such restriction, this paper presents a method to mathematically verify assembly conditions based on the disassemblability, which is defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed method provides an effective means of solving the work time evaluation problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• Safety and Health at Work
• /
• 제9권3호
• /
• pp.249-256
• /
• 2018

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure-assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job title and hazardous agents to examine the associations with cancer risk or mortality.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.154-163
• /
• 2002

This study tries to analyze how TPM works in domestic manufacturing industry by estimating two-stage model. First stage tests the effects of five TPM-factor variables (TFV : (1) Small group activity & Autonomous maintenance, (2) Education & Training, (3) Planned maintenance, (4) improving effectiveness of each piece of facility (5) Safety & Environment) to two TPM-performance variables. Second stage tests how two TPVs affect the industry's productivity level. By combining these two stages, this study uses a model to explain how TPM, represented by TFVs, works to improve productivity via TPVs. Multivariate and univariate regression and correlation analyses were peformed. It is shown that five TFVs works in two different ways to improve the industry's productivity level. In the second stage, overall equipment effectiveness has relatively more significant effects to the productivity level.

• 소음진동
• /
• 제2권4호
• /
• pp.273-280
• /
• 1992

The prediction of vibration response of floor is necessary in order to check whether the floor vibration level will satisfy the allowable vibration standard of precise machinery such as electronic microscopes in semiconductor manufacturing plant before the installation of various neighboring equipment facility. In conventional vibration isolation, we were mainly interested in minimization of vibration transmissibility and stabilization of vibration isolation system. But in order to predict vibration response of floor, it is necessary to know exciting force of equipment installed on the floor and the mobility of the floor. We measured the exciting force of the dropped mass assumed as equipment and the mobility of some practical building floor using large impact hammer. And from this we predicted the vibration response of floor on which the mass dropped. This predicted vibration response of floor is compared with measured vibration response. Through upper procedure, we examined the possibility of predicting vibration response of floor from the information of exciting force of equipment and the mobility of floor.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.255-264
• /
• 1996

This Paper presents a heuristic algorithm for machine-part group formation considering part production information (Production volume, roution sequence, unit operation time, facility size) in cellular manufacturing logistics system. In general, factory space is restricted within limited size when cells are located. A twofold heuristic algorithm is developed for considering factory space restrictions of located cells. The first phase is a aggregation procedure to minimize inter cell movement for satisfactoring space restriction. The second phase is a rearrangement procedure to maximize line balancing efficiency between machines within the cell and non assigned machine during first phase. Numerical example is presented to verify the efficiency of proposed algorithm.

• 식품과학과 산업
• /
• 제52권2호
• /
• pp.140-152
• /
• 2019

"Contained use" means using LMOs during manufacturing processes within a facility, equipment or other physical structures to prevent the spread of LMOs to the external environment. LMOs and their substances not only have played an essential role in various industries in different ways, but also have made to spread concerns in Biosafety widely. In Korea, the LMO Act is to implement the Cartagena Protocol on Biosafety' since 1st Jan 2008. This is focused on Biosafety and Risk management for LMOs according to the precautionary principle.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.26-32
• /
• 2022

It is known that the fluidized bed incinerator, which is the subject of analysis, shows excellent performance in heat and mass transfer due to excellent mixing and contact performance between fluidized sand and fuel, and also shows relatively good combustion characteristics thanks to good mixing and long residence time for low-grade fuels. have. In this study, air flow analysis is performed to understand the characteristics of co-firing of sludge, waste oil and solid waste in the fluidized bed incinerator, flow characteristics of flue gas, and discharge characteristics of pollutants.The fluidized bed incinerator subject to analysis is a facility that incinerates factory waste and general household waste together with sludge, with a processing capacity of 32 tons/day. to be. In addition, the operation method was designed for continuous operation for 24 hours. As a result, it can be seen that the lower combustion air and the introduced secondary air are changed to a strong turbulence and swirl flow form and exit through the outlet while rotating inside the freeboard layer. The homogeneous one-way flow form before reaching the secondary air nozzle has very high diffusivity with the high-speed jet flow of the nozzle.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.45-51
• /
• 2023

During the operation of a nuclear power plant (NPP), the waste reactor vessel closure head (RVCH) that is replaced owing to design or manufacturing defects is buried in a designated area or temporarily stored in a radiation shielding facility within the NPP. In such cases, storing it for extended periods proves a challenge owing to space constraints in the power plant and a safety risk associated with radiation exposure; therefore, dismantling it quickly and safely is crucial. However, not much research has been done on the dismantling of the RVCH in an operational power plant. This study proposes a dismantling process based on the radioactive contamination level measured for the Kori #1 RVCH, which is currently being discarded and stored, and examines the decontamination and cutting according to this process. In addition, the amount of secondary waste and dismantling cost are evaluated, and the dismantling effect of the reactor closure head is analyzed.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.83-88
• /
• 2015

농용 트랙터는 일반적인 도로 주행이 아닌 논 또는 밭과 같은 험지에서 작업용으로 사용한다. 때문에 정적 하중 뿐만 아니라 동적 하중이 고려된 구조 해석이 진행되어야 한다. 하지만 동적 입력 하중을 계산하기 위해서는 다양한 작업기와 하중조건을 모사해야 하기에 실제 측정에 많은 시간과 노력이 소요된다. 이러한 노력들을 줄이기 위해서 본 연구에서는 상용 자동차와 동일하게 농용 트랙터를 위한 4 축 도로하중 시뮬레이터(4-Post Road Simulator) 모델을 개발하였다. 입력하중을 검증하기 위해 사내 험로 시험장에서 차축의 가속도 값과 바디프레임의 변형률(strain)을 측정하였다. 가속도 값은 동역학 모델의 입력 하중으로 사용하고 모드 중첩 법을 포함한 동역학 해석을 수행하여 변형률을 검증하였다. 이를 통해 험로 프로파일과 유사한 거동을 나타내는 4 축 도로하중을 구할 수 있었으며 신뢰성을 검증하였다.