• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.145-149
• /
• 2003

Manufacturing facilities of the pharmaceuticals must meet certain level of the cleanness required so that foreign substances such as dust, moisture, heat, microorganism, or virus do not contaminate the product. In case of radiopharmaceuticals for medical treatment and diagnosis, not only should the operators and environment be protected from radiation but also need to be isolated from the foreign contaminant. Therefore, manufacturing facilities for radiopharmaceuticals must satisfy the design standards of both hot cell and clean room which are specified by GMP. However, standards of maintaining negative pressure for preventing spread of radioactive contaminant in isolated facilities conflict with the standards of maintaining positive pressure for keeping cleanness. To solve this problem, air pressure of hot cell was designed lower than in the adjacent area to meet standards of the radiation safety. To keep higher cleanness in certain part of the hot cell for filling, minimal relative positive pressure allows. In order to effectively maintain the cleanness that is required for production of Tc-99m generator, which takes 70% of whole demand of radiopharmaceuticals, the rooms placed in each side of production room are used as a buffer area and three lead hot cells are installed in production room. In this research, we established the appropriate engineered design concept for Tc-99m generator manufacturing facility, which satisfies both GMP cleanness standard for preventing particles, bacteria, other contaminants and the regulations of radiation safety for supervising and controlling the amount of radiation exposure and exhausted radioactivity. And the concept of multi-barrier buffer zones is introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.203-212
• /
• 2019

Along with the recent fourth industrial revolution, the world's manufacturing powerhouses are pushing for national strategies to revive the sluggish manufacturing industry. Moon Jae-in, the government is in accordance with the trend, called 'advancement of science and technology is leading the fourth round of the Industrial Revolution' strategy. Intelligent information technology such as IoT, Cloud, Big Data, Mobile, and AI, which are key technologies that lead the fourth industrial revolution, is promoting the emergence of new industries such as robots and 3D printing and the smarting of existing major manufacturing industries. Advances in technologies such as smart factories have enabled IoT-based sensing technology to measure various data that could not be collected before, and data generated by each process has also exploded. Thus, this paper uses data generators to generate virtual data that can occur in smart factories, and uses them to analyze the cause of the defect in real time and to predict the replacement cycle of the facility.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2022

The government promotes the 2050 carbon-neutral policy. Therefore, the concern to convert livestock manure into energy is increasing for the reduction of greenhouse gases generated in the livestock industry sector. In this study, the economic feasibility of the livestock manure solid fuel power generation facility, which is a major consumer of livestock manure solid fuel, was assessed to expand the demand for livestock manure solid fuel. The production cost of livestock manure solid fuel showed the lowest production cost of 97.4 thousand won/ton when dried using solid fuel at a 200 ton/day scale bio-drying facility. The livestock manure solid fuel power generation facility showed economic feasibility at a REC weight of 1.5 in the case of the bio-drying facility, so it was necessary to set a REC weight of 1.5 or more to expand the demand for livestock manure solid fuel. The conversion of livestock manure into solid fuel has various environmental benefits, such as the reduction of greenhouse gases and the effect of reducing non-point pollutants in the water system. Therefore, in order to expand livestock manure solid fuel production facility, it was required to review the feasibility including various environmental benefits.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.3
• /
• pp.339-344
• /
• 2014

The predictive capacity of wastewater treatment facility in the industrial park was estimated by the traditional method and on-the-spot survey such as certification of wastewater report and the invoices of water supply and ground water supply. The ratios of a converted wastewater to supplied industrial water between traditional method and on-the-spot survey in the estimation methods were different. By using traditional method, the business type of clothes, accessary and fur production had 77.18 % of waste ratio of wastewater and $10.72m^3/day{\cdot}1000m^2$ unit mass of wastewater as the highest among 9 business types. With the respect to the on-the-spot survey, food manufacturing business type had 75 % of waste ratio of wastewater and $8.35m^3/day{\cdot}1000m^2$ unit mass of wastewater as the highest values. The amount of wastewater from on-the-spot survey method was 541 $m^3/day$ less than one from traditional method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.35-39
• /
• 2010

The IT project for power plants initiated domestically in 2005 necessitates the power equipment facility and the controllers for those to be sufficiently adaptable for automation system for power substations. This implies that the power plants using power equipments must be developed to satisfy the IEC61850 standards. The IEC61850 communication standards that all power equipment and facility and controllers installed in automation system for power substations must follow has had its Parts 3 and Part 4 established as international standard in January 2002 and Part 10 in May 2005, the last to become international standard. Hence all separate parts of the original IEC61850 standard came to be established as international standards. As a consequence, after 2005, in most power substations around the world the IEC61850 standard is being applied and the prominent makers are geared towards manufacturing products to the IEC61850 standard. The IEC61850 is being recognized as an essential standard that must be applied to not only power substations but for automation of power systems and communication systems. In this research, the Gateway device that connects current SCADA system and IEC61580 based system has been domesticated with Korea‘s own technology and extensive testing was carried out in order to obtain confidence in its performance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.283-290
• /
• 2014

In the flat panel display industry, to meet production target quantities and the deadline of production, the scheduler and dispatching systems are major production management systems which control the order of facility production and the distribution of WIP (Work In Process). Especially the delivery time is a key factor of the dispatching system for the time when a lot can be supplied to the facility. In this paper, we use survival analysis methods to identify main factors of the delivery time and to build the delivery time forecasting model. To select important explanatory variables, the cox proportional hazard model is used to. To make a prediction model, the accelerated failure time (AFT) model was used. Performance comparisons were conducted with two other models, which are the technical statistics model based on transfer history and the linear regression model using same explanatory variables with AFT model. As a result, the mean square error (MSE) criteria, the AFT model decreased by 33.8% compared to the statistics prediction model, decreased by 5.3% compared to the linear regression model. This survival analysis approach is applicable to implementing the delivery time estimator in display manufacturing. And it can contribute to improve the productivity and reliability of production management system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.73-79
• /
• 2021

In the wave of the 4th industrial revolution, smart factory is required in many factories. However, small and mid-sized companies (SMEs) still have aging machines and are having difficulties in the data collection stage, which is the basis of smart factories. This study proposes a low cost monitoring method by using an open source based technology that extracts data from the image of the facility control panel without the need for modification of existing facilities. The proposed method was tested and evaluated for forging facilities in automobile parts manufacturing plants through prototyping. As a result of the evaluation, it was confirmed that low-cost facility monitoring is possible, and it will help SMEs build smart factories.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.429-438
• /
• 2023

Recently, demand for smart factories is increasing in response to the era of the 4th industrial revolution. Smart factory is basically a manufacturing industry based on massive data, which requires IT services for processing a lot of data, which is accelerating the construction of data centers. Data center computing equipment requires a different approach from the cooling technology of general facilities in terms of heat load and usage time. This study investigates the factors to be reviewed in the recent data center cooling system design and technological change trends, compares and reviews various technological methods for facility configuration of case companies, derives the design decision process, and draws up a conceptual design corresponding to the conclusion.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.212-221
• /
• 2010

Proposed in the paper is a methodology to generate kinematic template for 3D JIG models. Recently, according to increase of the rate of automatic facility in manufacturing system, the 3D manufacturing and verification research and development have been issued. So, unlike in the past, moving 3D facilities are very various like JIGs, turn table, AS/RS worked in the automated manufacturing industry. Because 3D mesh models are used in these kinds of 3D simulation, users have to define the kinematic information manually. This 3D mesh data doesn't have parametric information and design history of the 3D model unlike the design level data. So, it is lighter than 3D design level data and more efficient to render on the 3D virtual manufacturing environment. But, when user wants to find a common axis located between the links, the parameter information of the model has to reconstruct for defining kinematic construction. It takes a long time and very repetitive to define an axis and makes a joint using 3D mesh data and it is non-intuitive task for user. This paper proposed template model that provides kinematic information of the JIG. This model is kinds of a state diagram to describe a relation between links. So, this model can be used for a kinematic template to the JIG which has a same mechanism. The template model has to be registered in the template library to use in the future, after user made the model of the specific type of the 3D JIG model.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.37
• /
• pp.277-327
• /
• 2008

This paper is to provide for an analysis on the trade adjustment assistance program and the Case study affected by international trade and FTA. The paper offers a legal study on analysis about Korea's Trade Adjustment Assistance Law for the Manufacturing Industries, USA's TAA. and Japan's law for Industry revival. In general, USA's TAA measures are defined as assistance actions for business enterprises, farmers and manufacturing industries workers. We exclude farmers and fishermen under Korea's Trade Adjustment Assistance Law for the Manufacturing Industries's business enterprises and workers, but we give them the systemic supports under korea's special assistance law for the farmers and fishermen and so on after FTA. Especially this focuses on the trade adjustment assistance case about both Korea's agriculture-farmer assistance from FTA and USA's TAA from workers in layoffs of trade-impacted communities. Korea has provided TAA to the sphere of agriculture after special legislation in Korea-Chile helping closed orchard, modernizing high quality producing facility for agriculture competition, producing superior fruit saplings, and constructing the distribution center in the producing district. But for US-Korea FTA and rapid increase of import by FTA expansion, we must prepare such indemnity systems for loss as cash benefit and wider aids for closed farm. The USA's TAA program targets manufacturing workers affected by international trade, who may have fewer transferable skills and face greater challenges to reemployment than other dislocated workers. A large majority sought some assistance from their one-stop center. Relatively small numbers chose to enroll in training, but those who did it often used this opportunity to chart a new career path. Finally, we learned the importance of education and discipline from USA cases. The fast and accurate information providing can raise efficiencies. The infrastructure can maximize the effect of TAA. The effective application would help us get over difficulties of TAA at hand.