• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.936-941
• /
• 2005

To achieve rapid developments and ensure competitiveness, cost saving, digital manufacturing is essential in die shops. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by digital environments representing the physical and logical schema and the behavior of real manufacturing system including manufacturing resources, processes and products. For applying digital manufacturing to die shop, engineering information managements of products, manufacturing process and resources are needed. In this paper proposes and implements, PLM approach for achieving engineering collaborations in engineering activities. We suggest detail procedures, some examples and considerations of PPR managements in die shop.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.576-580
• /
• 2004

As technology innovation has become a competitive weapon in the globalized era, firms are engaged in the development of new products to gain competitiveness in the marketplace. One of the main phenomena in a firm's effort to enhance technology development activities is the formation of technology strategy, i.e. the formalization of technology development activities within the firm. This paper explores the practice and management of technology innovation in the Korean manufacturing sector. Based on a survey of over 100 manufacturing firms in Korea, it identifies the contemporary practice of technology planning, and also characterizes the types of relationships that exist among participating interest groups for technology strategy formulation within a firm.

• Industrial Engineering and Management Systems
• /
• v.10 no.3
• /
• pp.191-196
• /
• 2011

The purpose of this paper is to study user's involvement in new product development (NPD). It seeks to identify the factors involving user and design practices in the design process of new product development. A survey was conducted on 20 respondents consisting of designers involved in product development from various industries. The study focused on the early activities of the product design process which is called product specification. The analysis performed considers the importance of involving users in design decision. The outcome of this research is the significance of involving users and its effect on product development activities. The research also provides a model for an integrated user, designer and product knowledge activity in the product development process.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.237-243
• /
• 2012

This paper reviewed the relationship between information technology system and knowledge management activities, and the moderating effect of industrial type. The results of multiple regression analysis, based on the responses from 219 employees in manufacturing and financing service sector, showed that information technology infrastructure and information technology usage have positive effects on knowledge acquisition, knowledge transfer, and knowledge usage. In moderating effects, information technology infrastructure more positively related with knowledge acquisition in financing service sector than in manufacturing sector. And also information technology usage more positively related with knowledge transfer in financing service sector than in manufacturing sector.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1996.05a
• /
• pp.15-15
• /
• 1996

A shop floor control system (SFCS) is the central part of a CIM system used to control the activities of several pieces of manufacturing equipment (e.g., NC machines, robots, conveyors, AGVs, AS/RS). The SFCS receives orders and related process plans, and then performs selecting a specific process routing, allocating resources, scheduling the workpieces, downloading the processing instructions (e.g., RS-274 instructions for NC machines, VAL II programs for robot), monitoring the progress of activities, detecting and recovering from errors, and preparing reports on the status of the manufacturing system. Simulation has been utilized in discovering control policies used for resolving shop floor be control problems such as resource contentions, part dispatching, deadlock. The simulation model must be designed to respond to real-time data coming from a shop floor. However, to rapidly build a realtime simulation model of SFCS cannot be easily accomplished. This talk is to address an automatic program generator of discrete event simulation model for shop floor control from process plans and resource models. The program generator is capable of constructing complete discrete simulation models for multi-product and multi-stage flexible manufacturing systems.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.3
• /
• pp.276-281
• /
• 2007

Oddi is a mulberry fruit that has anti-inflammatory and antioxidative effects. This study was carried out to investigate the quality characteristics of mulberry fruit wines manufactured by two different methods. Where they were processed according to the traditional Korean fruit wine methodology(A) or a modified(B). Sensory qualities, physiochemical characteristics, and biochemical activities of the Oddi wines were analyzed. From the results of the sensory evaluation, manufacturing method A showed higher acceptability. However, the two different methods was not significantly different overall. The method A wine had higher brightness(L)(77.65) redness(a), and yellowness(b). As for the antioxidant activities and ACE(angiotensin-converting enzyme) inhibitory abilities of the wines manufacturing method A had greater values.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.51-59
• /
• 2016

Measurements of the automobile manufacturers are available anywhere and anytime, directly based on the criterion of failure is measured. The maintenance of high-precision production activities is direct evidence of the fact that competitive manufacturing activities are very important in determining the success of companies to recall defective starting from raw material costs. The current manufacturing sites produce calipers and clearance gauge the degree of tool only specific. Therefore, judging the quality, including the number of errors, requires a lot of attention to the dimension failures in day-to-day measurements and measurement tasks and duties repeated in difficult situations. In this paper, we aim to develop a vehicle manufacturing plant site using each of the manufacturing processes while operating a measurement tool. We display it using the Image Processing PC-based S/W with all those visual facts by management and recorded as image information a more accurate and current situation to obtain information and share visual measurements. We carry out research on the design and development vision inspection algorithm applied for pattern-recognition techniques that can help manufacturing site quality control.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.1
• /
• pp.124-139
• /
• 2010

This study analyzes determinants of innovation in Korea manufacturing industries from 2005 to 2007. In order to do this, we use raw data from 'Korea Innovation Survey 2008: Manufacturing Sector' conducted by STEPI, and also collect financial statement data from Korea Investors Service. As an analytical method for the empirical test, we utilize Probit model. Empirical results show that firm size and market concentration have positive relationship with firm's innovation activities. These support the ‘Schumpeterian hypothesis’. This would be the most distinguished feature of this study compared to previous literatures.Our study also shows that R&D personnel ratio, R&D intensity, and advertising intensity have positive effects on firms' innovation. Thus, we can say that R&D activities and consumer orientation are the main determinants of innovation. However, profit ratio and growth rate do not have any statistically significant effect on firms' innovation.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1166-1172
• /
• 2003

The extremely strong competition among the world automobile industries has introduced the concept of PLM in the total production activities, one of whose major components is VM(Virtual Manufacturing). If the production lines are equipped with robots, the application of OLP in the virtual space is fully mature. However, in the point of the investment's and the maintenance's view, there are always some activities, which can not be automated: for example, typically the manual welding for prefixing in the automobile body shop and the material loading. Process planning for these activities, therefore, are decided mainly by experiences, which caused many repeated rework of the processes and the inconvenience of the workers, and resulted consequently in the reduction of the productivity and the safety of the workers. In this paper, the optimal dimension of the welding gun and its handle position and the optimal working path is simulated and decided by use of DELIMN/IGRIP and DELMIA/Ergo and the working area modelized in the virtual workcell of DELMIA.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.719-739
• /
• 1996

A common control model used to implement computer integrated manufacturing(CIM) is based on the hierarchical decomposition of the shop floor activities, in which supervisory controllers are responsible for all the interactions among subordinates. Although the hierarchical control philosophy provides for easy understanding of complex systems, an emerging manufacturing paradigm, agile manufacturing, requires a new control structure necessary to accommodate the rapid development of a shop floor controller. This is what is called autonomous agent-based heterarchical control. As computing resources and communication network on the shop floor become increasingly intelligent and powerful, the new control architecture is about to come true in a modern CIM system. In this paper, heterarchical control is adopted and investigated, in which a controller for a unit of device performs three main functions - planning, scheduling and execution. Attention is paid to the planning function and all the detailed planning activities for heterarchical shop floor control are identified. Interactions with other functions are also addressed. In general, planning determines tasks to be scheduled in the future. In other words, planning analyzes process plans and transforms process plans into detailed plans adequate for shop floor control. Planning is also responsible for updating a process plan and identifying/resolving replanning activities whether they come from scheduling or execution.