• Title/Summary/Keyword: Manufacturing Resources

Search Result 973, Processing Time 0.022 seconds

Preparation and Characterization of the Hydrolyzed Protein from Shaving Scraps of Leather Waste Containing Chromium (피혁폐기물(皮革廢棄物)인 Shaving scraps으로 부터 가수분해(加水分解) 단백질(蛋白質)의 제조(製造) 및 특성(特性))

  • Kim, Won-Ju;Cho, Ju-Sik;Lee, Hong-Jae;Heo, Jong-Soo
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.5 no.2
    • /
    • pp.47-56
    • /
    • 1997
  • To examine of possibility protein recycling of shaving scraps contained chrome generated from manufacturing process of leather, the characteristics of hydrolyzed protein that differently treated with MgO as alkaline agent were investigated. In alkaline hydrolysis of saving scraps treated with MgO, MgO had to be treated over 5.0% to maintain over pH 8.0 that is insoluble of chrome. Under the condition of alkaline treated with MgO, the solubility of chrome is low with about 60%. The average molecular weight of hydrolyzed proteins from shaving scraps treated with MgO was about 80~100 KD. The amino acid contents of that were largely collagen proteins such as glycine, alanine and proline, and acidic amino acids such as aspartic acid and glutatamic acid. The contents of Mg, Ca and Na in hydrolyzed protein were too much as liquid fertilizer, and chrome contents was 30~40 ppm that largely decreased in comparing with raw materials (40,000~42,000 ppm).

  • PDF

Evaluation of the Applicability of Sediment Discharge Measurement in Mountain Stream using the Load-cell Sensor (Load-cell Sensor를 이용한 산지 토사유출량 계측의 현장 적용성 검토)

  • Seo, Jun-Pyo;Lee, Ki-Hwan;Kim, Dong-Yeob;Woo, Choong-Shik;Lee, Chang-Woo;Lee, Heon-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.1
    • /
    • pp.644-653
    • /
    • 2018
  • Landslides occur frequently due to the effects of heavy rainfall and typhoons caused by climate change. Erosion control measures are needed to effectively prevent landslide damage. In order to improve their efficiency, it is necessary to quantitatively measure the sediment discharge from the mountain stream. In this study, a load cell sensor was installed in a mountain stream and the measured values were compared according to the applicability and load test type in the mountain stream. The result of the load test showed that the effect of the loading type (load test 1, 2) was low at average (loadings) of 0.4kgf and 0.6kgf at sites 1 and 2, respectively. The load factor was also derived by regression analysis to increase the accuracy of the measured values. According to the results of the load factor (normalized) to the load-cell measurement value, the output value increased by 14.8% and 24.6% in sites 1 and 2, respectively, and was calculated to be similar to the reference value. The load cell sensor enabled us to quantitatively estimate the amount of sediment discharge in the mountain stream through time series analysis with the water level and rainfall information. If the monitoring is carried out for a long time, it can be used to find the sediment discharge mechanism for the mountain stream. In addition, applying sensors such as load-cells to a mountain stream is expected to contribute to the development of related industries, such as the manufacturing of measurement sensors.

Quality Characteristics and Storage Improvement of Seasoned Pork Added with Phlomis umbrosa Turcz. Extracts (속단추출물의 첨가로 인한 양념 돈육의 품질특성 및 저장성 향상)

  • Kim, Hyun-Jeong;Kim, Mi-Jin;Oh, Song-I;Jung, Young-Tae;Park, Soo-Kyoung;Lee, In-Seon
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.40 no.1
    • /
    • pp.102-109
    • /
    • 2011
  • Antioxidant and antibacterial activities of Phlomis umbrosa Turcz. (PU) ethanol extracts were investigated in vitro. Total polyphenols, flavonoids and FRAP values of PU extracts were $57.32{\pm}2.30{\mu}g$/mg, $21.44{\pm}2.52{\mu}g$/mg and 0.26 mmol $Fe^{2+}$/g, respectively. The PU extracts also showed strong DPPH scavenging activity and antibacterial effects against Staphylococcus aureus. In addition, the DPPH scavenging effect of the seasoning sauces was increased by the addition of PU extracts. This study was also conducted to evaluate the quality characteristics of seasoned pork treated with PU extracts during storage at $4^{\circ}C$ for 21 days. Seasoned pork was produced containing 0, 0.5, and 1% PU extracts and 0.1% BHA. The total bacteria and TBARS values of seasoned pork added with PU were decreased compared to the control, whereas coliform bacteria were not detected after longer storage periods. With regards to sensory evaluation, seasoned pork treated with 0.5% PU had higher juiciness, flavor and overall acceptability compared to seasoned fork. These results suggest the possibility of manufacturing seasoned pork with PU extracts for the improvement of shelf-life and quality.

Effect of Manufacturing Technology on Functional Fertilizer and Feed through Recycling of Fishery Resources (수산부산물을 재활용한 제조방법이 기능성 비료와 사료에 미치는 영향)

  • Ann, Seoung-Won;An, Gap-Sun;Cho, Jun-Kwon;Cho, Tae-Dong
    • Journal of Environmental Science International
    • /
    • v.25 no.11
    • /
    • pp.1575-1582
    • /
    • 2016
  • In this study, to provide basic information for design of a large-scale recycling system for fishery by-products, the food nutrient components, fertilizer components, and microbial composition of fertilizers and feed which were made of fishery by-products were analyzed before and after fermentation. The results of the analysis of the edible portion of fishery by-products indicated that calories per 100 g of crustaceans were the highest followed by those of fish and brown algae in order of precedence with values as follows; Korean Krill 94 Kcal, Portunus trituberculatus 65 Kcal, Lophiomus setigerus 58 Kcal, and Undaria pinnatifida 16 Kcal. As for changes in amino acids per 100 g of fishery by-products between before and after fermentation, calories per 100 g of P. trituberculatus decreased by 74.7% from 15.7 g to 4.0 g, that of L. setigerus decreased by 61.1% from 11.9 g to 4.6 g, that of Korean Krill decreased by 53.5% from 11.6 g to 5.4 g, and that of U. pinnatifida decreased by 49.4% from 1.7 g to 0.9 g. Among amino acids, those contained in fishery by-product fertilizers (liquid fertilizer) in large amounts were shown to be Glutaminic acid, Aspartic acid, Glycine, Lysin, and Leucine. The lipid content of Korean Krill decreased by 11.9% from 3.2 g to 2.8 g, that of L. setigerus increased by 2.0 times from 1.1 g to 2.2 g, that of P. trituberculatus increased by 4.5 times from 0.4 g to 1.7 g, and that of U. pinnatifida increased by 9.4 times from 0.2 g to 1.9 g. The ash (mineral) content of P. trituberculatus decreased by 82.5% from 26.2 g to 4.6 g, that of U. pinnatifida increased by 27.6% from 3.3 g to 4.2 g, that of Korean Krill increased by 21.9% from 3.1 g to 3.8 g, and that of L. setigerus increased by 88.7% from 1.2 g to 2.2 g. The microbial composition of liquid fertilizer using recycled fishery by-products was shown to be Bacteria, Actinomycetes, Fungi, Yeast, and Lactobacillus sp.

The Case Study on the Success Factors of Korean Car Sharing Business (한국 차량공유사업의 성공요인 사례분석)

  • Kim, Jiye;Han, Ingoo
    • Knowledge Management Research
    • /
    • v.21 no.3
    • /
    • pp.1-25
    • /
    • 2020
  • This study analyzed key success factors of Korean car-sharing enterprises, Socar and Greencar, and the responsive strategies of Korean car-manufacturing company, Hyundai Motor Group, in the face of emerging sharing economy under the specific economic and regulatory system in Korea. The outcomes of the analysis are as follows. 'Timely market entry' in early startup phase and 'use of external resources' in early growth phase were key success factors common to both Socar and Greencar. However, the differences in the eventual business directions of the two companies also resulted in different key success factors in the expansion phase of their business. For Socar which focused on maintaining its independence and the external growth of B2C business, customer relation marketing and sufficient capital raising were key success factors. For Greencar which became a part of a business group and focused on improving the efficiency of business operations, timely market entry (B2B market) was key success factor. The use of external resources and cooperation with large corporations emerged as key success factors common to both companies in the rapid growth phase. The responsive strategies of the Hyundai Motor Group were collaboration, investment and direct management of DeliveryCar. The short-term goal of the responsive strategy was the operation of test-bed in collaboration with car-sharing company while the mid/long term goal was planning new mobility services by utilizing collected data. Securing opportunities for early market dominance for autonomous car industry was also found to be an important goal.

Mineralogical and Physico-chemical Properties of Fine fractions Remained after Crushed Sand Manufacture (국내 화강암류를 이용한 일부 인공쇄석사 제조과정에서 생기는 스러지의 광물.물리화학적 특성)

  • Yoo, Jang-Han;Ahn, Gi-Oh;Jang, Jun-Young
    • Journal of the Mineralogical Society of Korea
    • /
    • v.19 no.4 s.50
    • /
    • pp.355-361
    • /
    • 2006
  • Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.

Development of Concrete and Evaluation of Properties of Combined Steel making Slag Aggregates for Offshore Structure Production(II) (해양구조물 제조를 위한 제강슬래그 골재 조합별 물성평가 및 콘크리트 개발(II))

  • Jung, Won-Kyong;Kim, Hyun-Seok;Park, Dong-Cheon;Cho, Bong-Suk
    • Resources Recycling
    • /
    • v.25 no.2
    • /
    • pp.60-68
    • /
    • 2016
  • In this study, earlier analyzed tetrapod, one of an original group of offshore constructions studied for manufacturability of the concrete using the properties of steel making slag aggregate. steel making slag aggregate assessment, RCS and Blast Furnace Slag : the 20 mm air-cooled slag and combinations by 50 %, aggregate properties on the most appropriate for the properties of recycled aggregate concrete optimal mix, and assessing it. Properties of concrete used to be derived are judged as to bury the studies show that the hollowing-out of the RCS, plastic sole use is in the workability of the aggregate, plastic in the 20 mm slag also assessed to be a slight disadvantage, but RCS by mixing air-cooled coarse and 50 percent to 20 percent 50 mm. Thus, steel making slag marine structures using recycled aggregate, in rapid chilled slag or air-cooled slag. The sole use of the aggregate them than to combine the aggregate of concrete. After they satisfy the quality standard quality shall be used will aggregate steel making slag who meet the criteria concrete manufacturing in general or par with the aggregate of concrete. Performance was assessed as to develop a more than that.

Evaluation for Applicability as the Inorganic Binder with Rapid Setting Property for Construction Material of LFS Produced from Various Manufacturing Process (다양한 철강제조공정에서 부산되는 전기로 환원슬래그의 급경성 무기결합재로의 적용성 검토)

  • Kim, Jin-Man;Choi, Sun-Mi;Kim, Ji-Ho
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.7 no.2
    • /
    • pp.70-77
    • /
    • 2012
  • The Ladle Furnace Slag, about 20% of the electric arc furnace slag, has high content of free CaO and free MgO, which generates the expansion collapse by hydration reaction. Although many researchers have been endeavoring to recycle the EAF reducing slag in construction fields, there is not found the effective recycling method up to now. However, the LFS(Ladle Furnace Slag) contains mineral composition of the system of calcium aluminate with high-reactivity. Therefore, it is possible to developed the quick setting property and the high strength at the early age by the rapid cooling. This study aimed to check the reactive minerals and predict the reactivity with water on the LFS discharged from different steel product plants. The test results show that many types of LFS has hydration reactivity and can use in construction field as a inorganic binder with the rapid setting property.

  • PDF

CO2 Evaluation of Reinforced Concrete Column Exposed to Chloride Attack Considering Repair Timing (보수시기를 고려한 염해에 노출된 콘크리트 교각의 탄소량 평가)

  • Kim, Seong-Jun;Kim, Young-Joon;Kwon, Seung-Jun
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.2 no.1
    • /
    • pp.1-9
    • /
    • 2014
  • In this paper, $CO_2$ amount is evaluated considering repairing timing and unit $CO_2$ amount per repair method including various stage of material manufacturing, moving, and construction. Four mix proportions with mineral admixture are considered and repairing timing/numbers are simulated based on the results from Life 365 which can handle chloride penetration. Furthermore two repair methods (simple cover concrete replacement and replacement with electro-chemical method for removing chloride content) are considered and the related $CO_2$ emissions are evaluated. From the study, the case with high W/B (water to binder ratio) ratio shows smaller $CO_2$ emission in construction stage but it increases more rapidly with increasing number of repair. $CO_2$ emission considering electro-chemical method greatly increases with the increasing unit $CO_2$ for the repairing method. The numbers of jumping step (repairing number) are evaluated to be 9 for WB37-OPC, 18 for WB50-OPC, 4 for WB40-SG, and 7 for WB47-SG respectively. RC structures with the longer maintenance free period are evaluated to be advantageous for saving $CO_2$ emission.

An Analysis of the Landscape Character in Environment Friendly Cultivated Land Based on Rural Amenity (어메니티에 기초한 친환경농업 경작지의 경관특성요소 분석)

  • Kim Hye-Min;Kang Bang-Hun
    • The Korean Journal of Community Living Science
    • /
    • v.17 no.1
    • /
    • pp.11-21
    • /
    • 2006
  • This research is focused on not only cultivated land as an important factor which represented the agricultural district, but also details of the research in the landscape of cultivated land. Moreover, we also focused on the cultivated land operating environmental friendly agriculture which took a lot of interest among the landscape of the cultivated land. The reason is, we judged environmental friendly agriculture is not only the simple purpose only for manufacturing food but also the key role for preserving their environment and landscape, and making sustainable agriculture. For this reason, our research treats the analysis that operating environmental friendly landscape has what kinds of different factors in landscape characteristic compare with other general agricultural methods. Plus we selected evaluating both the degree of citizen's presence and the degree of rural residents's importance in those factors as a mainly research matter. We drew out the landscape of cultivated land and concerning factors by analyzing policies(ESA, CSS, CTE, MFSP, ACL, etc) concerned with overseas agricultural landscape to deduct landscape Character factors in internal cultivated land. Based on eleven items of landscape factors in cultivated land deducted by documents research, we started to conduct field studies during MAY. 7th. 2004 $\sim$ JUL. 8th, DEC. 1th $\sim$ 3th reaching 32 villages and concerned institutes to deduct the factors in landscape characteristic in agricultural cultivated land in detail. We analyzed degrees of importance and preference in citizen and rural residents classified by 5 province of the whole country to evaluate the landscape Character factors in environmental friendly agriculture deducted by field research and 21 documents including extra items such as a scene of duck grazing by the duck techniques which is very popular way among internal environmental friendly agriculture, gardening space composed around farm and furrow on slope ground formed by unique topology in hilly country. The research period was progressed for 20 days from MAY. 28th. 2005 $\sim$ JUN. 17th. This research is the result that cultivated land landscape as a detail item holding agricultural environment especially, it is also meaningful result in environmental friendly agriculture as a basic research, because it is not only a value of simple food producing but also very effective role in both landscape and environmental parts.

  • PDF