• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.125-135
• /
• 2021

Due to the lack of national consensus on the importance and value of the character industry and the lack of recognition of value as a national strategic industry, the development of the character industry is experiencing great difficulties. The purpose of this study is to analyze the economic effects of character industry in China to help establish policies and strategies for the character industry in the future. To this end, this study utilized the China 2017 Industrial Association Table. The analysis results are as follows. China's character industry has a lower production inducement effect than other industries with a column total of 3.45514, and a row total of 1.30015. This shows that China's character industry is still being produced by small and medium-sized companies with a low equity ratio. Second, in the character industry, the index of the sensitivity of dispersion representing the forward linkage effect is 0.01426 and the impact factor is 0.03790, which are all less than 1. Therefore, it can be said to be the final demand manufacturing type.Third, in China character industry's income induction is 0.47690 and the production tax induction effect is -0.04912. It can be seen that the character industry has less income induction and tax burden generated every time the final demand increases by one unit in the entire industry than in other industries.Despite the quantitative growth of the character industry in China, the impact on other industries is low and it is not playing a role as an income-generating industry. Structural improvement is needed for the qualitative development of China's character industry.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.147-152
• /
• 2021

We report high-power continuous-wave operation of a Yb-doped fiber laser at 1070 nm, pumped by high-power laser diodes at 976 nm. Based on theoretical calculation of the stimulated Raman scattering and temperature distribution in the fiber, we construct a bidirectionally pumped Yb-fiberlaser system incorporating a pair of fiber Bragg gratings and a cladding light stripper. The fiber laser yields 3.0 kW of continuous-wave output at 1070 nm in a diffraction-limited beam with M² ≈ 1.26 for 4.1 kW of incident pump power, corresponding to a slope efficiency of 81.5%. The prospects for further power scaling are discussed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.478-482
• /
• 2021

In this paper, methods for manufacturing shielding concrete by recycling steelmaking slag discarded as industrial waste and measuring the shielding effectiveness of the shielding concrete were studied. By comparing the result of shielding effectiveness measurement of this concrete block with shielding effectiveness measurement of the structure constructed with this concrete, the measurement system for measuring shielding effectiveness of the concrete block was verified. The size of the concrete stru ctu re is 2.9 × 2.9 × 3.4m and the concrete block is 0.3 × 0.3 × 0.2m. The frequ ency band u sed for mesu rement is 600MHz - 2GHz, the types of concrete u sed to measu re the shielding effectiveness are general concrete and concrete containing electric arc furnace oxidizing slag. In the case of the concrete structure, reinforcing rebars are installed at intervals of 15cm for stru ctu ral safety, as the frequ ency increase, the electromagnetic wave properties of rebars gradu ally decreased, there was a slight difference in the measurement results. In conclusion, the measurement result of shielding effectiveness of the concrete block is similar to the result of the concrete structure. It is thought that it can be sufficiently utilized for electromagnetic wave engineering design, and the concrete shielding effectiveness measurement system using standard specimens was verified.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.44-52
• /
• 2021

This study investigated the effect of the type of alkaline precipitant used on the synthesis of lithium hydroxide by examining the behavior of lithium hydroxide produced using lithium sulfate recovered from a waste lithium secondary battery as a raw material. The double-replacement reaction (DRR) process was used to remove the impurities contained in the lithium salt precursor of lithium sulfate and to improve the efficiency of the synthesis of lithium hydroxide. The experiment was conducted by control the molar ratio of the precursor ([Li]/[OH]), the reaction temperature, and the composition of the alkaline precipitant (KOH, Ca(OH)2, Ba(OH)2) used for the production of highly-crystalline lithium hydroxide. A secondary solid-liquid separation was performed following the reaction to remove the impurities generated, and the purified aqueous solution of lithium hydroxide was evaporated to remove the moisture and obtain the product as a powder. The crystallinity and synthesis behavior of the product were examined.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2010

Proximate composition of whole hemp seed, paste viscosity of whole hemp seed pellets, bulk density, color, compression force, water solubility and absorption index and bowl life of whole hemp seed flakes manufactured by extrusion process were determined to evaluate whole hemp seed as flake additive. Extrusion process conditions were 35% of moisture content and 90, 100 and 110$^{\circ}C$ of barrel temperature. Content of moisture content, crude protein, crude fat, crude ash from whole hemp seed were 5.67${\pm}$0.02%, 25.93${\pm}$0.16%, 28.21${\pm}$0.56% and 7.70${\pm}$0.08%, respectively. The pellets hemp seed at 100 or 110$^{\circ}C$ had higher paste viscosity as compared to those pellet at 90$^{\circ}C$. The bulk density values of all hemp seed flakes were between 0.24 to 0.43 g/mL, depending on the barrel temperatures. The hardness of flake increased with decreasing percentage of hemp seed in flakes. An increase in barrel temperature from 90$^{\circ}C$ to 110$^{\circ}C$ resulted in increase of WSI and decrease of WAI. The bowl life of hemp seed flakes was increased from 5.8 to 15.5 min with the decrease in percentage of hemp seed. The highest overall quality was showed in flake added with 20% of hemp seed.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2010

This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130$^{\circ}C$, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.112-117
• /
• 2010

Black ginger, obtained from steaming and drying process, provides the various functional properties. This study was performed to investigate the optimum processing conditions for black ginger with high content of biologically active substance such as anti-oxidations. Optimum processing conditions such as temperature and time for black ginger was determined by response surface methodology (RSM) with manufacturing process and functionality. The optimum steaming condition was determined 6 hours at 93.2$^{\circ}C$, and 82.7 mg/L DPPH scavenging activities was obtained at this condition. The black ginger drink was made with black ginger extracts, Japanese apricot, and honey. Interaction effects of these ingredients were investigated by modified distance based on design and analyzed by linear, nonlinear regression model, and RSM. The optimization of mixture ratio was made by statistical modeling using DPPH scavenging activities and sensory properties which are the important target constraints in drink. Total flavonoids showed a linear canonical form, while preference and antiradical activity showed a nonlinear canonical form indicating the higher interaction among mixtures. The response trace plot revealed that antiradical activity, sensory properties and total flavonoids were quite sensitive to the drink blending. The optimum formulation of the drink was set at 14.2% of black ginger extracts, 5% of Japanese apricot, and 10.8% honey.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.243-249
• /
• 2011

Optimum conditions to prepare a yeast extract with rice protein hydrolysates(rh) were investigated. The yeast extract was obtained at the level of 2.3 g/L from the yeast culture medium($30^{\circ}C$, 48 hr) composed of 5% rh and glucose( 3%, w/w). Within the extract, RNA was contained at the level of 188.1 mg/g and the levels of GMP and IMP as nucleotides were $650.33{\pm}48{\mu}g/g$, $69{\pm}21{\mu}g/g$, respectively. When Rrh(Residual rice protein hydrolysate by $Delvolase^{(R)}$) was supplemented into a yeast extract, the savory taste like umami of the mixture was found to increase noticeably based on the measurements by taste sensing system as well as sensory test. It is assumed that soluble peptides in Rrh could play an important role in improving the overall taste of yeast extract by enhancing its umami taste. Therefore, the yeast extract supplemented with Rrh could be used for manufacturing a high value-added natural seasoning ingredient.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.153-158
• /
• 2010

Changes in physicochemical properties of soybean pastes (Doenjang) of various salt contents (8-14%) during fermentation were investigated to explore the possibility of manufacturing a low salt soybean paste. Titratable acidity (TA) increased and consequently pH decreased with the fermentation time. The rates of TA and pH changes increased as the salt levels decreased. Protein contents remained unchanged and there were no differences among different salt levels. The amino nitrogen contents and the volatile basic nitrogen contents increased with fermentation time and showed higher values at lower salt levels. The reducing sugar contents increased from 6th to 11th week of fermentation, and decreased afterward. No remarkable differences in the reducing sugar contents were observed with respect to salt levels. Shorter fermentation periods were required at reduced salt levels. Appropriate fermentation periods of the 8, 10, 12 and 14% salt containing Doenjang were 2 to 11 weeks, 3 to 12 weeks, 6 to 14 weeks, and 9 to 15 weeks, respectively. Doenjang fermented for shorter period of time at lower salt content showed better sensory quality than that for longer period at higher salt content.