• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.270-277
• /
• 2008

Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.121-132
• /
• 2012

Recently, interest in emotional technology has escalated and its application has extended to many fields, from both an industrial (product) and service (culture, tourism, medical, education, advertising) perspective. Moreover, culture has become a fundamental aspect of modern industry, playing key roles in: gaming, exhibitions, performances, sports, tourism, design, edutainment, as well as various content distribution industries. The prospect of applying emotional technology for cultural content industries makes up for more than half of the 'plan-manufacture-distribution-marketing' process, and thereby also serves as driving force for the growth of a nation. The primary objective of the following research is analyze successful cases from the past through utilization of emotional technology, and to speculate on efficient directions for future research into developing emotional contents. To achieve this, some of the key terms have been defined and elaborated for the sake of clarity. The terms are as follows: emotion, emotion engineering, science of emotion, emotional technology, and emotional contents. Furthermore, studies were conducted based on the six different fields surrounding CT R&D to observe how projects involving emotional technology have succeeded both on a national and global scale. Based on this analysis, this research aims to develop personalized 'Concierge' service-providing contents, contents designed to maximize performance ability of humans, and contents that could be controlled simply via emotion to effectively spread the culture of Korea by focussing on 'fusion' content development. The following research data may hopefully serve as a basic reference to industries navigating towards emotional content development.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.48-48
• /
• 2011

국내 염색가공업에 종사하는 중소기업은 약 1,700여개 업체로써, 평균 50억/년 매출을 하고 있으며, 생산의 대부분을 임가공에만 의존하고 있는 실정이다. 이들 염색가공업체들은 섬유제품의 품질 향상 등을 위해 전처리, 염색, 가공이라는 섬유습식공정을 행하게 되는데 그 공정이 따로 분리되어 있어 임가공 업체 입장에서는 시간과 비용 차원에서 비효율적인 면이 존재하여 왔다. 따라서 공정합리화, 원가합리화를 위해 따로 분리되어 있는 위 공정을 통합하려는 시도를 많이 했지만 전처리/염색 공정의 통합에서 일부 성과가 있었을 뿐 효과면에서는 아직 미흡한 실정이다. 또한 가공이란 공정은 그사용 약제의 특수성에 따라 기존 Padding-Drying-Curing이라는 3 step process를 반드시 필요로 하고 있기 때문에 가공 공정의 통합은 시도조차 이루어지지 않고 있는 것이 현실이다. 따라서 염색공정과 가공공정의 통합을 시도하기 위해서는 관련 약제 개발이 출발이라 할 수 있으며 그 첫 대상은 염색 공정의 소핑과 가공공정의 유연처리를 동시에 행할 수 있는 소핑유연제로 선정하려 한다. 즉 셀룰로오스계 섬유의 반응성 염색 후 소핑 공정에서 일액형 소핑유연제, 한가지 제품만을 간편하게 사용해도 소핑효과와 유연효과를 동시에 얻어 후속 유연처리 공정을 생략할 수 있는 것이다. 그렇게 되면 시간적으로나 비용적으로 큰 절감 효과를 가져와 임가공 업체의 부담을 덜어 줄 수 있을 뿐만 아니라 공정 통합을 통해 배출되는 폐수의 양도 상당량 감소시킬 수 있을 것으로 기대된다. 본 연구 결과, 폴리옥시에틸렌 트리데실 에테르 타입의 계면활성제와 개질된 디메틸폴리실록산 계열의 실리콘 오일, 그리고 이들의 상용성을 확보하기 위한 특수 용제 및 첨가제를 최적의 비율로 배합하여 안정한 일액형 복합 소핑유연제를 제조할 수 있었다. 제조된 소핑유연제는 유백색 반투명 액상의 외관을 가지며 pH(10%solution)는 $7{\pm}1$, 고형분은 $13.5{\pm}0.5%$이었다. 이 소핑유연제의 성능 평가결과, 소핑력은 기존의 소핑제와 동등 수준으로 세탁견뢰도 4급이상의 성능을 보였고, 유연성 면에서도 기존의 유연제와 동등 수준으로 평가되었다. 이로써 기존의 분리된 소핑 공정과 유연공정을 개발된 제품을 이용하여 통합할 수 있어 염색현장의 비용절감, 공정단축의 효과를 기대할 수 있게 되었다.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.48-53
• /
• 2016

The objective of this study was to evaluate the accuracy and efficiency of different methods used for the fermentable sugar assay in the production of Makgeolli sul-dut. In the initial stage of fermentation, Ipguk treatment produced a higher alcohol content compared to the Nuruk treatment. However, the alcohol content was not significantly different between the two starters at the final stage of fermentation. Acidity in the Ipguk treatment was higher than that of Nuruk throughout the fermentation period. After analyzing the fermentable sugars using dinitrosalicylic acid (DNS), Fehling's method, refractometer, glucose kit, and high performance liquid chromatography (HPLC), it was confirmed that the HPLC method was the most accurate for fermentable sugar quantification. In both types of starters, DNS and Fehling's methods showed results comparable to HPLC in terms of fermentable sugar content, while the glucose kit and refractometer analyses showed relatively large discrepancies, indicating that the Fehling's method could also be effective for the analysis of fermentable sugars in the manufacture of Makgeolli.

• Review of Culture and Economy
• /
• v.17 no.2
• /
• pp.29-62
• /
• 2014

Game industry, one of cultural-content industry which is considered as a typical knowledge-based industry and creative industry, is not like the overseas expansion of traditional manufacture, and has different strategy and performance of export expansion through product or project-based strategy. Therefore, it should be approached by each content unit, and necessary to look at the factors that make their decision makings of foreign market entry vary. This study focuses on discovering creativity, absorptive capacity and strategic orientation(market orientation and innovation orientation) which affect the difference of distribution's decision making of entry into foreign market in game industry This paper examined 252 cases of online games in order to investigate creativity, absorptive capacity and strategic orientations for each foreign market and what entry type(among licensing, joint distribution, exclusive distribution) they chose according to the products developed in team level. This helps us analyze the factors affecting market orientation and innovation orientation in the perspectives of creativity and absorptive capacity in comprehensive way, and notice the phenomena which use different foreign distribution strategy though there are company incorporated abroad and their results. This study supplements the limit of the existing Resource-Based View, Resource-Dependent View, and traditional international business theories such as Transaction Cost Theory or OLI Paradigm(Eclectic Framework), and proves how company could reduce asymmetry of uncertainty and information in creative industry and whether they accomplish successful overseas expansion according to strategic orientations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.243-246
• /
• 2016

Data transfer technique is one of the key elements of the IT infrastructure, in accordance with each environment and function, using some kind of protocol. Using the three protocols such as WCDMA, AIS, and TRS at sea IT industry. so It uses three protocols saw has a problem that the operation of each protocol-specific server. so server maintenance costs increase and sea Device Manager has been placed in a situation which operates to develop each of the protocol-specific analysis program. The reason of the protocol is divided into three, marine equipment (lighthouses, buoys, light buoy) manufacturing companies and the date of manufacture, such as, communication environment (distance, communication speed) because such is wrong all, trying to unify this and enormous cost and time is a situation that can not be the exchange occurred when. So in the Ministry of Maritime Affairs and Fisheries, the number of frequency of use is low, communication performance is seeking to refrain from Kure each local organizations and companies the use of low TRS protocol. his paper is intended to conduct research on the basis of the actual data to analyze whether the method is how economical to store a single DB by analyzing other types of protocols. This reduces the shortage of marine IT industry, even a little, shall helps reduce administrative costs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.165-172
• /
• 2019

The purpose of this study was to evaluate the effect of application time and phosphoric acid etching of 8th generation adhesives containing functional monomer on adhesive performance in primary teeth. 80 extracted non-carious human primary teeth were selected and divided into 8 groups based on 3 factors: (1) adhesive: G-Premio bond and Single bond universal; (2) application time: shortened time and manufacture's instruction; (3) acid etching mode: self-etching and total-etching. Shear bond strength was measured using a universal testing machine, and fractured surface were observed under scanning electron microscope. Microleakage was evaluated by dye penetration depth. G-Premio bond were not significant different in shear bond strength and microleakage depending on application time of adhesive and acid etching mode. In Single bond universal, shear bond strength of short application time was significantly lower than that of long adhesive application time (p = 0.014). Clinically applicable shear bond strength values (> 17 MPa) were identified in all groups. These results suggested that G-Premio bond be used clinically for a short application time without phosphoric acid etching.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.319-332
• /
• 2021

With the rapid development of aesthetic ceramic materials and resin adhesives, the transition from metal ceramic crown to all-ceramic restoration is being actively carried out. When making porcelain restorations, the advantages can be maximized only when appropriate forms and techniques are used. Recently, an esthetic partial-coverage restoration method with supra-gingival margins was introduced by applying a minimally invasive tooth removal method that preserves enamel as much as possible and enhances adhesion efficiency. Through this, various advantages such as minimization of tooth structure removal and ease of excess cement removal can be obtained. In addition, since this manufacturing method does not require cord packing, it is possible to save time for impression taking and reduce patient discomfort. Furthermore, the margins can be clearly obtained without the intervention of gingival fluid or blood, making it possible to manufacture more accurate restorations. In the following cases of patients with partial tooth defects, esthetic ceramic partial-coverage restorations with supra-gingival margin was applied using minimally invasive tooth preparation method according to the concept of adhesive dentistry. Therefore, unnecessary tooth abutment preparation was prevented and residual tooth structure could be preserved as much as possible. After delivery of the ceramic partial-coverage restorations, favorable outcome was obtained.

• Journal of Platform Technology
• /
• v.9 no.3
• /
• pp.52-62
• /
• 2021

Quality control is critical at manufacturing sites and is key to predicting the risk of quality defect before manufacturing. However, the reliability of manual quality control methods is affected by human and physical limitations because manufacturing processes vary across industries. These limitations become particularly obvious in domain areas with numerous manufacturing processes, such as the manufacture of major nuclear equipment. This study proposed a novel method for predicting the risk of quality defects by using natural language processing and machine learning. In this study, production data collected over 6 years at a factory that manufactures main equipment that is installed in nuclear power plants were used. In the preprocessing stage of text data, a mapping method was applied to the word dictionary so that domain knowledge could be appropriately reflected, and a hybrid algorithm, which combined n-gram, Term Frequency-Inverse Document Frequency, and Singular Value Decomposition, was constructed for sentence vectorization. Next, in the experiment to classify the risky processes resulting in poor quality, k-fold cross-validation was applied to categorize cases from Unigram to cumulative Trigram. Furthermore, for achieving objective experimental results, Naive Bayes and Support Vector Machine were used as classification algorithms and the maximum accuracy and F1-score of 0.7685 and 0.8641, respectively, were achieved. Thus, the proposed method is effective. The performance of the proposed method were compared and with votes of field engineers, and the results revealed that the proposed method outperformed field engineers. Thus, the method can be implemented for quality control at manufacturing sites.