• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.20-26
• /
• 2005

Various kinds of practical machines using the single phase induction motor (SPIM) are utilized to control both speed and torque. In particular, the capacitor-run type SPIM has the characteristic that allows the motor torque to be altered by auxiliary capacitance variation. In this study, we manifest an equivalent model having a more simplified configuration, and clarify the relationship between torque and capacitance. Also, we design an experimental controller that is able to perform speed control with ease by the phase angle control of the AC input voltage. Validity of this study is confirmed through the simulation and experimental results obtained.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.360-369
• /
• 1992

A heat pump system is constructed to evaluate its performance and heat transfer characteristics with mixtures of R22/R142b as working fluids. The heat transfer in the evaporator and the overall performance are measured and analyzed in terms of the compositions and relevant variables. Possibility of capacity modulation by changing composition is observed without degradation of heat transfer coefficients and coefficient of performance. The cooling capacity is varied continuously within 200 percent based on minimum capacity at constant compressor speed. For similar cooling capacity, COP is improved by mixing two refrigerants and shows maximum value at 60％ mass fraction of R22. Average heat transfer coefficients of mixtures decrease in comparison with pure refrigerants at similar cooling capacity and mass flow rate. However, the overall heat transfer coefficients decrease moderately. A cycle simulation is performed in order to manifest the advantages of using refrigerant mixtures, considering experimentally observed heat transfer characteristics.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 제3회 심포지움 (분리막 연구의 최신동향)
• /
• pp.1-13
• /
• 1995

A review is presented for various gas tranport mechanisms through microporous membranes of both polymeric and inorganic materials. Different transport modes manifest depending on the pore size and the flow regime, which is a function of pressure, temperature, and the inateraction between gas molecules and the pore walls. For microporous membranes whose pores are small and the intenal surface area huge, the surface diffusion becomes a significant factor. If the pores become even smaller, them the transport mechanism will be more of an activated diffusion type. When conditions are right capillary condensation will take place to create an enormous capillary pressure gradient, which will greatly enhance the permeation flux. At the same time the capillary condensate of the heavier component may block the membrane pores denying the passage of the lighter gas molecules. All of these phenomena will influence the separation of mixtures.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.25-31
• /
• 1997

The variations of gas hold-up, overall volumetric oxygen mass transfer coefficients and liquid circulation velocity in an internal loop reactor were investigated to manifest scale-up effect. The relationship between superficial gas velocity and gas hold-up were found as Ugr = 0.045 $\varepsilon$r in the pilot-scale and Ugr = 0.056 $\varepsilon$r in the bench-scale reactor. The overall volumetric oxygen mass tractsfer coefficient, KLa was slightly increased in the pilot-scale than in the bench-scale reactor. Flow regime was changed from the bubble flow to the churn-turbulent flow when the superficial gas velocity reached to 3.5 - 4 cm/sec in the pilot-scale.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.209-212
• /
• 2006

Until now, sulfate attack is not completely understood. The purpose of this study is to provide a fundamental data to understand deterioration mechanism by sulfate attack. Chemical processes for products formed by sulfate attack were explained in this study. ASTM C1012 test and microstructural observations such as XRD and BSE analysis were carried out to manifest behavior and role of the products formed during sulfate attack. Regarding the dominant causes of sulfate attack, the main deterioration modes could be divided into 3 types; (1) expansive type, (2) onion-peeling type, and (3) acidic type.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.98-101
• /
• 2003

The Alkali-Aggregate Reaction (AAR) may cause a serious failure in the concrete structures. Several researchers in some nations have performed the continuous studies to prevent failure of a concrete structures by the AAR distress as well as the studies to manifest the mechanism. The ASTM Standards to prevent failure by potential AAR aggregates were established in 1950. The KS F2545 and KS F 2546 were established to test the susceptibility of aggregate to potential AAR in 1982. But the researches on the AAR have not been performed affluently in Korea because the distress due to AAR has seldom been reported officially. In this study, the Chemical Method and Scanning Electron Microscopy (SEM) were used to verifying the cause of the pattern crack on the surface and internal crack in the plain concrete pavement. It can be concluded that the distress of a specific site in plain concrete pavement was mainly due to AAR, and the chemical method and SEM may be the effective tools for verifying the cause of AAR distresses.

• 한국주거학회논문집
• /
• 제11권2호
• /
• pp.13-23
• /
• 2000

Lived space, i.e. space as we experience it in our mundane life, does not exist independently of material objects: it is defined, delimited and made sensible by them. Concrete spaces so manifest are not sterile and neutral homogeneous voids. Not only do they interact with material objects but also influence our feelings and behaviour, constituting emotionally charged fields. This field dynamics of space is readily observed in the phenomenon of place as well as in the etymology and usage of the word 'place'. Each space is pervaded by a particular mood or atmosphere in accordance with its size and shape as well as with the perceptual properties of its constituent objects. Moreover, within each space the atmosphere also changes depending on the location. Space then can be thought of as a nonhomogeneous field of emotional energy. The fact that one is attracted to some places and repulsed by others may be described as one's being subject to invisible forces of pulls and pushes, attractions and repulsions. Out spatial environment is therefore a field of forces of varying directions and magnitudes.

• 교육시설
• /
• 제1권1호
• /
• pp.63-75
• /
• 1994

This study aims to establish an analogy of presenting facade of elementary school in order to express a formal manifest in accordance with children's aesthetic sense and also to provide a better visual environment for children. The results of the study are as follows: 1) Formal expression of elementary school should be carried out primarily on harmony and unity, and based upon these, ideas of the architect should be applied. 2) Formal meaning of volumes and spacious feelings that are analogized in facades and masses of elementary schools should consider factors like the number of classrooms, sitescale. Volumetric sense should be composed as to induct coziness, conciseness, corresponding with conscious characteristics classified by grade. 3) Characteristics of presented meaning should be based upon humanistic intimacy, at the same time visually expressing characteristics of sculptural value and rationality.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.10-16
• /
• 1994

This study aimed at measuring the latent heat of phase transformation of S45C carbon steel in quenching and at conducting the analytical researches into the calculation of cooling curves including the latent heat. The temperature of phase transformation of steel and its latent heat are dependant upon the cooling rates at the temperature of A1 phase transformation point. The effect of the latent heat of phase transformation is especially manifest at the cooling curve of center of specimens. The higher the cooling rates became, the lower fell the temperature region of phase transformation. In the figures of cooling rates, the phenomena of cooling rate dropping into zero was caused by the latent heat of phase transformation.

• Investigative Magnetic Resonance Imaging
• /
• 제20권3호
• /
• pp.200-205
• /
• 2016

In Korea, tuberculosis is still common disease. Central nervous system tuberculosis can manifest in a variety of forms, including tuberculous meningitis, tuberculous cerebritis, tuberculoma, tuberculous abscess, and miliary tuberculosis. Although intra-axial tuberculomas are the more common type of CNS tuberculosis, extra-axial lesions are rarely encountered. En plaque tuberculoma is an extremely rare presentation of intracranial tuberculosis with mimicking primary or secondary meningeal neoplasia. We describe a rare case of an en plaque tuberculoma accompanied by tuberculous meningitis and tuberculomas.