• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.154-161
• /
• 2014

Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.

• 수산해양기술연구
• /
• 제56권4호
• /
• pp.374-383
• /
• 2020

At ship design stage, the maneuverability is generally estimated based on the empirical formula or the computational fluid dynamic (CFD), which is one of the numerical simulation methods. Using the hydrodynamic derivatives derived through these methods can quantitatively estimate the maneuverability of target vessels and evaluate indirect maneuverability. Nevertheless, research on estimating maneuverability is insufficient for ships not subject to IMO maneuverability standard, especially fishing vessels, and even at the design stage, the empirical formula developed for merchant ships is applied without modification. An estimation error may occur due to the empirical formula derived from the regression analysis results of a model test if the empirical formula developed for merchant ships with different hull shapes is applied to fishing vessels without any modification. In this study, the modified empirical formula that can more accurately estimate the fishing vessel's maneuverability was derived by including the hull shape parameter of target fishing trawlers in the regression analysis process that derives Kijima et al. (1990) formula. As a result, the modified empirical formula showed an average estimation error of 6%, and the result improved the average error of 49% of Kijima et al. (1990) formula developed for merchant ships.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.479-486
• /
• 2021

This study aims to explore the relationships between strategic planning, strategic maneuverability, and firm performance in the current dynamic business environment. It employs a quantitative research method and reports on a survey, using a questionnaire, of service companies in Indonesia's oil and gas industry. Of the 337 companies selected by simple random sampling from a vendor database, responses were received from 70 companies. The analysis was performed using Partial Least Square Structural Equation Modeling and SmartPLS software. The analysis consisted of descriptive statistics, evaluation of the measurement model, evaluation of the structural model, and hypotheses testing. The results show that both strategic planning and strategic maneuverability have a positive relationship with firm performance. In addition, there is a positive relationship between strategic planning and firm performance through the mediating role of strategic maneuverability. The findings suggest that the organizational agility, organizational flexibility, and organizational responsiveness that constitute strategic maneuverability have a positive direct and indirect effect on firm performance, namely financial performance, customer performance, internal process performance, and learning and growth. This study contributes to the strategic management literature and the theory of maneuvers by providing empirical evidence on the relationship between strategic planning, strategic maneuverability, and firm performance.

• 해양환경안전학회지
• /
• 제28권5호
• /
• pp.800-808
• /
• 2022

국제해사기구에서는 해상에서의 선박의 충돌방지와 그로 인한 해양환경의 보호를 목적으로 1993년 11월 선박조종성능에 대한 잠정지침을 채택한 이후, 축적된 데이터를 바탕으로 2002년 12월 선박조종성능에 대한 확정된 지침을 채택하였다. 하지만 채택된 지침은 만재상태, 등흘수 및 선박의 최대 출력(MCR)의 85 %에 해당되는 선속의 최소 90 % 이상에서의 지침으로, 동 지침은 항해사에게 필요한 실 항해조건에서의 조종성능 정보를 제공하는 데 한계가 있다. 따라서 본 연구에서는 항해사, 선장 및 선박조종에 대한 식견을 갖추고 있는 전문가를 대상으로 빈도분석과 AHP 분석기법을 실시하여 현 지침에 대한 활용도 및 실제 선박조종에 필요한 정보가 무엇인지를 식별하였다. 연구결과 선박을 운항하는 항해사에게 필요한 조종성능 정보는 5~10°의 소각도에서의 선회권 정보, 항해속력(Sea speed)이 아닌 조종속력(Maneuvering speed)에서의 z-test 정보라는 것을 확인하였고, 속도제어 관련하여서는 항해속력 및 만재상태에서의 정지성능에 대한 정보보다 감속타력, 가속타력 등에 대한 정보가 더 필요하다는 것을 확인하였다. 도출된 결과는 선박을 조종하는 항해사에게 필요한 선박조종성능기준 지침마련에 대한 기초자료로 활용도가 높을 것으로 사료된다.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.465-472
• /
• 2011

Recently, ultra large scale of ship is being ordered continuously and because of that, the accurate prediction of ship maneuverability in design stage becomes important matter. The model test like PMM test or CFD analysis are representative methods for predicting the maneuverability of ship. In this study, the captive model tests were carried out for predicting maneuverability of MOERI container ship(KCS) which is opened to the public using X-Y Carriage of Ocean Engineering Wide Tank of University of Ulsan. Considering the dimensions of tank, 2m class model ship was used for captive model test. CMT(Circular Motion Test) was performed for obtaining purer hydrodynamic coefficients related to yawing velocity. For getting hydrodynamic coefficients which cannot be obtained using CMT, PMM test(Planar Motion Mechanism test) were also performed. The maneuverability prediction results by simulation are compared with those of other research institutes.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.98-109
• /
• 2020

In recent years, there have been concerted efforts toward predicting ship maneuvering in shallow water since the majority of ship's accidents near harbors commonly occur in shallow and restricted waters. Enhancement of ship maneuverability at the design stage is crucial in ensuring that a ship navigates safely. However, though challenging, establishing the mathematical model of ship maneuvering motion is recognized as crucial toward accurately predicting the assessment of maneuverability. This paper focused on a study on sensitivity analysis of the hydrodynamic coefficients on the maneuverability prediction of KVLCC2 in shallow waters. Hydrodynamic coefficients at different water depths were estimated from the experimental results conducted in the square tank at Changwon National University (CWNU). The simulation of standard maneuvering of KVLLC2 in shallow waters was compared with the results of the Free Running Model Test (FRMT) in shallow waters from other institutes. Additionally the sensitivity analysis of all hydrodynamic coefficients was conducted by deviating each hydrodynamic derivative from the experimental results. The standard maneuvering parameters including turning tests and zig-zag maneuvers were conducted at different water depths and their effects on the standard maneuvering parameters were assessed to understand the importance of different derivatives in ship maneuvering in shallow waters.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.25-31
• /
• 2002

A system identification method is introduced to increase the prediction accuracy of a ship's maneuverability in PMM test, analysis. To improve the accuracy of linear hydrodynamic coefficients, the analysis techniques of pure sway and yaw tests are developed, and confirmed. In the analysis of sway tests, accuracy to linear hydrodynamic coefficients depends on the frequency of sway motion. To obtain nonlinear hydrodynamic coefficients for large drift angles, a combined yaw test is introduced. Using this system identification method, runs of PMM test can be reduced while retaining sufficient accuracy, compared to the Fourier integration method. Through the comparisons with sea trial results and the Fourier integration method, the accuracy and efficiency of the newly proposed system identification method, based on least square method, has been validated.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.76-83
• /
• 2016

The various model tests are carried out to estimate and verify a ship performance in the design stage. But in view of the cost, the model test should be applied to every project vessel is very inefficient. Therefore, other methods of predicting the maneuverability with confined data are required at the initial design stage. The purpose of this study is to estimate the hydrodynamic derivatives by using the multiple regression analysis and PMM test data. The characteristics of the stern shape which has an important effect on the maneuverability are applied to the regression analysis in this study. The correlation analysis is performed to select the proper hull form coefficients and stern shape factors used as the variables in the regression analysis. The comparative analysis of estimate results and model test results is conducted on two ships to investigate the effectiveness of the maneuvering hydrodynamic derivatives estimation applied the stern shape. Through the present study, it is verified that the estimation using the stern shape factors as the variables are valid when the stern shape factors are located in the center of the database.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.171-176
• /
• 2006

To improve ship's maneuverability high lift rudders like as Schilling rudder, flap rudder etc. were used. To predict the maneuverability of a ship with flap rudder HPMM tests are carried out. To analyze the test results modular model is used. To use modular model the forces of flap rudder must be measured separately from the hull forces. The flap rudder is made as independent system from the hull. To investigate the simulation results of modular model the tests results are analyzed by whole ship model, and simulated. The compared results of simulation show a good agreement except turning test. The reason is the different analysis result of flap rudder drag forces. From the present study it is possible to analyze HPMM tests of a ship with flap rudder by modular model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.378-383
• /
• 2001

In order to improve automobile maneuverability and tire durability, it is very important for one to determine a suitable sidewall contour producing the ideal tension and strain-energy distributions. In order to determine such a sidewall contour, one must apply multi-objective optimization technique. The optimization problem of tire carcass contour involves several objective functions. Hence, we execute the tire contour optimization for improving the maneuverability and the tire durability using satisficing trade-off method. And, the tire optimization also requires long cup time for the sensitivity analysis. In order to resolve this numerical difficulty, we apply neural network algorithm.