구순구개열 환자에서는 이른 시기에 시행된 수술로 인한 구순이나 구개부의 반흔 형성으로 섭식장애나 발음장애를 동반한 상악의 열성장이 나타나게 된다. 때로는 집중적인 교정치료 후에도 심한 상악골 저형성증을 보이며 이러한 경우성장이 완료 된 후에 골이식을 동반한 악교정 수술로 상악골을 전방이동시켜 안모의 개선을 도모하기도 한다. 그러나 이러한 상악골의 전방이동은 연조직의 과도한 신장으로 인한 술후회귀현상, 추가적인 골이식이 필요하다는 한계를 가지고 있다. 골신장술은 이러한 한계점을 극복하는 최신 치료방법으로 구순구개열 환자, 두개골 융합증을 나타내는 환자 등에서 상악골을 포함한 두개 안면골의 개선에 많이 이용되고 있다. 특히 구외장치를 이용하는 골신장술은 골신장기간 중에 견인 방향의 조절이 보다 쉬우며, 충분한 양의 골신장이 가능하여 보다 좋은 결과를 얻을 수 있다. 본 증례는 상악 열성장을 보이는 구순구개열 6세 7개월의 여자 환아로, 변형된 구내 르포씨 1형 골절단술(modified Le Fort I osteotomy) 후 두개골을 고정원으로 이용하는 견고 구외 골신장술을 통해 상악골을 전진시켜 양호한 결과를 얻었기에 이를 보고하는 바이다.
Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제49권3호
/
pp.125-134
/
2023
Objectives: The aim of the study was to quantify and compare craniofacial asymmetry in subjects with and without symptoms of temporomandibular joint disorders (TMDs). Materials and Methods: A total of 126 adult subjects were categorized into two groups (63 with a TMDs and 63 without a TMDs), based on detection of symptoms using the Temporomandibular Joint Disorder-Diagnostic Index (TMD-DI) questionnaire. Posteroanterior cephalograms of each subject were traced manually and 17 linear and angular measurements were analyzed. Craniofacial asymmetry was quantified by calculating the asymmetry index (AI) of bilateral parameters for both groups. Results: Intra- and intergroup comparisons were analyzed using independent t-test and Mann-Whitney U test, respectively, with a P<0.05 considered statistically significant. An AI for each linear and angular bilateral parameter was calculated; higher asymmetry was found in TMD-positive patients compared with TMD-negative patients. An intergroup comparison of AIs found highly significant differences for the parameters of antegonial notch to horizontal plane distance, jugular point to horizontal plane distance, antegonial notch to menton distance, antegonial notch to vertical plane distance, condylion to vertical plane distance, and angle formed by vertical plane, O point and antegonial notch. Significant deviation of the menton distance from the facial midline was also evident. Conclusion: Greater facial asymmetry was seen in the TMD-positive group compared with the TMD-negative group. The mandibular region was characterized by asymmetries of greater magnitude compared with the maxilla. Patients with facial asymmetry often require management of temporomandibular joint (TMJ) pathology to achieve a stable, functional, and esthetic result. Ignoring the TMJ during treatment or failing to provide proper management of the TMJ and performing only orthognathic surgery may result in worsening of TMJ-associated symptoms (jaw dysfunction and pain) and re-occurrence of asymmetry and malocclusion. Assessments of facial asymmetry should take into account TMJ disorders to improve diagnostic accuracy and treatment outcomes.
연구 목적: 본 연구에서는 수술가이드를 이용한 무피판 임플란트 술식에서 임플란트 드릴링이 열발생에 미치는 효과를 측정하였으며 드릴링 방법에 따른 온도 차이를 측정하고자 하였다. 연구 재료 및 방법: 하악 양측 제 1 대구치와 제 2 대구치가 없는 실험 모델에서 피판을 거상하는 임플란트 수술(실험A군)과 수술가이드를 이용한 무피판 임플란트 수술(실험B군), 그리고 핸드피스의 상하 수직 움직임을 제한한 후 수술가이드를 이용하여 무피판 임플란트 수술(실험C군)을 각각 진행하여 온도 측정을 하였다. 임플란트 드릴링 시 온도 측정은 thermocouple과 열전식 온도 기록계(Yokogawa, Tokyo, Japan)를 이용하여 측정하였다. 온도 측정 위치는 최종 임플란트 드릴(직경 3.8 mm)의 경계부에서 0.5 mm 떨어진 곳에서 3 mm 깊이(설측)와 6 mm 깊이(협측)로 하였다. 측정된 온도 값을 이용하여 종속변수인 온도가 정규분포 하는지를 검정하기 위해 Kolmogorov-Smirnov test를 거쳐 확인한 후 세 수술 방법 간의 평균 온도 차이를 검정하기 위해 independent t-test로 분석하였다. 결과: 피판을 거상하고 드릴링을 한 수술군(실험A군)에서 평균 온도는 $27.2^{\circ}C$($SD{\pm}2.1^{\circ}C$)를 보였고 피판을 거상하지 않고 드릴링을 한 수술군(실험B군)에서 평균 $27.5^{\circ}C$($SD{\pm}2.3^{\circ}C$)를 나타냈다. 이들 두 수술 방법 간 온도비교에서는 통계학적으로 유의한 차이를 보이지 않았다. 수술가이드를 이용하여 무피판 수술 시 상하 수직 움직임(upand-down pumping motion)이 없이 드릴링을 시행한 수술군(실험C군)에서 평균온도는 $37.0^{\circ}C$($SD{\pm}3.4^{\circ}C$)을 보였다. 이를 상하 수직 움직임으로 드릴링을 한 무피판 임플란트 수술군(실험B군)과 비교 시 통계학적으로 유의한 온도 차이를 보였다. 결론: 수술가이드를 이용하여 무피판 임플란트 수술 시 핸드피스를 상하 수직 움직임으로 드릴링을 시행하면 피판을 거상하여 수술할 때와 온도차이가 발생하지 않으나, 상하 수직 움직임 없이 드릴링을 시행하면 드릴링 시 높은 온도 상승을 보인다.
The purpose of this study was to identify the effectiveness of the modified distraction osteogenesis (DO) method with the concept of overdistraction and compression stimulation which have been previously suggested by the authors in 2002 and to explore the optimal distraction-compression ratio and appropriate latency period for the compression force application during consolidation. The experimental specimens were assessed with radiography, histologic findings, and dual energy x-ray absorptiometry (DEXA) after the conventional DO method and the modified DO technique had been applied on rat mandibles. Total 60 rats were used for the study. In experimental group of 54 adult rats, mandibular osteotomies between the first and second molar areas were performed and customized external distractors were applied. The surgeries on 6 rats of control group also were done with same osteotomy technique and DO device application. Final amount of distraction was set-up as 2 mm on both groups. But, in a experimental group of 54 rats, distraction osteogenesis with a compression force were performed with the different distraction-compression ratio and variant latency periods for compression. The three ratio-subgroups were made as distraction 4 mm group with compression 2 mm, distraction 3 mm group with compression 1 mm, and distraction 2.5 mm group with compression 0.5 mm. In addition, The three subgroups with 3, 7, 11 days latency period prior compression were allocated on each ratio-subgroups. Total 9 subgroups consisted of 6 rats on each subgroup. In control group of 6 rats, conventional distraction technique were routinely performed. The rats of control groups were sacrificed on postoperative 3, 6 weeks after 2 mm distraction. The rats in the experimental groups also were sacrificed on the same euthanasia days of control groups to compare the wound healing. Final available specimens were 55 rats except 5 due to osteomyelitis, device dislodgement. Distraction-compression combined group on 6 weeks generally had showed increased bone mineral density than the same period group of conventional distraction technique on the DEXA study. More matured lamellar bone state and extended trabecular pattern in the combined group than those of control group were also observed in the histologic findings on 6 weeks. In the distraction-compression combined groups, the bone density of 2.5 mm distraction subgroups with 0.5 mm compression showed the highest value on the DEXA study among various force ratio groups. In the distraction-compression combined groups, the bone density of 3 day latency period subgroups showed the highest value on the DEXA study among various latency period groups for the compression application. From this study, we could deduce that 1/5 force ratio for the compression versus distraction, 3 day latency period prior compression application would be the most effective condition if modified distraction osteogenesis technique might be applicable. The modified DO method with a compression force may improve the quality of bone regenerate and shorten total treatment period in comparison with conventional DO technique clinically.
목적: 이 연구의 목적은 임플란트의 길이 및 치관-임플란트 비율(crown-to-implant (C/I) ratio)이 임플란트의 안정성과 임플란트 변연골 소실량(MBL)에 영향을 주는지 알아보기 위함이다. 연구 재료 및 방법: 연구대상자로 하악 구치부에 단일치를 상실한 46명의 환자를 선별하였다. 대조군에는 총 19개의 직경 5.0 mm, 길이 10 mm의 임플란트(CMI IS-III $active^{(R)}$ long implant)를 식립하였고, 실험군에는 직경 5.5 mm, 길이 6.6, 7.3, 8.5 mm의 임플란트 총 27개(CMI IS-III $active^{(R)}$ short implant)를 식립하였다. 각각의 임플란트는 디지털 방식으로 술 전 제작한 수술가이드를 사용하여 식립하였고 임시보철물을 장착하여 즉시부하를 시행하였다. 술 후 3개월에 CAD-CAM 방식으로 제작한 지르코니아 크라운으로 최종 수복하였다. 술 후 48주에 ISQ 값과 변연골 소실량을 측정하여 치관-임플란트 비율과 ISQ 및 변연골 소실량 간의 상관관계를 비교하였다. 결과: 두 그룹 모두 안정도 및 변연골 소실량 면에서 성공적인 결과를 나타내었다. 술 후 48주에 측정한 두 그룹간 ISQ와 변연골 소실량 값은 통계적으로 유의미한 차이가 없었다(P > 0.05). 치관-임플란트 비율과 안정성 및 치관-임플란트 비율과 변연골 소실량 간에 어떤 상관관계도 관찰되지 않았다(P > 0.05). 결론: 두 그룹의 하악 단일 임플란트에서 치관-임플란트 비율은 안정성 및 변연골 소실량에 영향을 주지 않는 것으로 나타났다. 골높이가 부족한 하악에서 단일 임플란트 수복 시, 짧은 임플란트는 상대적으로 높은 치관-임플란트 비율에도 불구하고 제한된 조건 하에서 적절한 대안이 될 수 있다.
교정치료의 목표는 좋은 안모 균형과 치열의 안정을 얻는 것이며 이를 위해서는 부정교합의 다양한 원인에 상응한 치료를 시행해야 한다. 본 연구에서는 성인 골격성 II급 부정교합자의 측모두부규격 방사선학적 특징을 조사하기 위하여 성인 정상교합자 140명(남 70명, 여 70명)과 성인 골격성 II급 부정교합자 120명(남 60명, 여 60명)의 측모두부규격 방사선사진을 촬영하였으며 계측결과를 바탕으로 골격 및 치아, 연조직 59개 항목을 평가하여 다음과 같은 결론을 얻었다. 1. 수직적 거리 계측치 및 고경 비율은 골격 분석에서는 정상교합군과 II급 부정교합군에서 차이가 없었으나 연조직 분석에서는 다소 차이를 보였다. 2. II급 부정교합군이 정상교합군에 비해 하악골 길이는 더 작았으며 더 후방에 위치하였다. 3. 상악골의 길이와 전후방적 위치는 II급 부정교합군과 정상교합군 간에 차이가 없었다. 4. 코, 상순, 상악 연조직 부위의 전후방적 위치와 Nasolabial angle은 정상교합군과 II급 부정교합군 간에 차이가 없었으며 하악 연조직의 전후방적 위치에서 뚜렷한 차이를 보였다. 5. 상하악 전치의 수직적 길이(U1-HP, L1-MP)는 II급 부정교합군이 정상교합군보다 더 컸으며 제1대구치에서는 두 군간 차이가 없었다. 6.상순에 대한 상악전치의 노출도(U1-Stms), 상악전치의 치축 각도(U1-HP)는 두 군간 차이가 없었으며 하악전치의 치축 각도(IMPA)는 II급 부정교합군이 정상교합군보다 더 컸다. 7. II급 부정 교합군의 안모 유형 분류에서, 상악골은 정상 위치 하고 하악골이 후방 위치하는 경우가 43.3%로 가장 많았으며, 상악골과 하악골이 모두 정상 위치하는 경우가 28.3%, 상악골과 하악골이 모두 후방 위치하는 경우는 20.0%였다.
Enlow의 구조적 대응체 분석법은 개개인에서 두개안면의 구성양상이 발달되어온 해부학적, 발육학적 특징의 복합체를 설명하고자 하는 것으로 다수의 평균에 의한 정상치와 비교하는 것이 아니고 개인에게서 나타나는 값을 비교하여 분석하는 방법이다. 본 연구의 목적은 두개안면의 골격형태에 인종적, 지역적으로 골격형태의 변이가 있으므로 한국인에 Enlow의 구조적 대응체 분석법을 적용해봄으로써 한국인 정상교합자에 나타나는 두개안면골격의 특성을 규명해보고자 하였다. 본 연구에서는 안모와 교합상태가 양호하고 교정치료의 경험이 없는 정상 교합자 100명(남자 50명, 여자 50명)을 대상으로 구조적 대응체 분석법을 이용하여 계측점과 계측선을 설정하고, 통계처리하여 다음과 같은 결과를 얻었다. 1. PCF와 PMV 간의 각도는 한국인 남자 평균 $38.54{\pm}2.93^{\circ}$, 여자 $38.43{\pm}2.90^{\circ}$으로 나타났고, Wits' appraisal은 한국인 남자 평균 $-2.51{\pm}3.25$와 여자 $-2.3{\pm}2.26$으로 나타났다. 하악지 배열을 나타내는 R4는 한국인 남자 $1.89{\pm}3.15$, 여자 $2.36{\pm}2.84$를 나타냈다. 2. 후두개저와 하악지의 골격적인 수평 길이 차이를 나타내는 A3-B3에서 여자가 남자보다 유의성있게 더 큰 차이를 나타내고 있어 여자가 남자에 비해 하악지가 후두개저(PCF)보다 더 긴 것으로 나타났다. 3. 상악골과 하악체의 길이 차이를 나타내는 A4-B4에서는 남자가 여자보다 유의성있게 더 큰 차이를 나타내고 있어 남자가 여자에 비해 하악체가 상악골보다 더 긴 것으로 나타났다. 4. 상악과 하악의 수평적인 전체 길이차를 나타내는 Al-Bl에서는 남녀에서 성차를 나타내고 있지 않았다. 이상의 결과에서 한국인은 서양인에 비하여 중안면부가 함몰되고 하악골은 전돌되며 하악지가 후하방으로 회전되어 있는 양상을 보인다. 또한 한국인에서 여자가 남자에 비해 하악지가 후두개저에 비해 더 크며 이에 보상적으로 하악체는 상악골에 비해 남자가 여자에 비해 더 크게 나타나는 것을 볼 수 있었다. 이로인해 결과적으로 상악과 하악의 전체적인 길이 차이에서는 남녀간의 차이를 나타내지 않았다.
본 연구는 술 전 교정치료 전 치아 이동 예측치(initial STO)와 술 전 교정치료 후 실측치에 바탕을 둔 STO (final STO)를 비교하고자 시행되었다. 부산대학교병원 치과교정과에 내원하여 교정 및 악교정수술 복합치료를 시행 받은 환자 중 하악만 수술한 환자 40명을 선정하여 상악 제1소구치 발치 여부에 따라 두 그룹(발치 그룹 20명, 비발치그룹 20명)으로 분류하였다. 술 전 교정치료 전의 initial STO, 술 전 교정치료 후의 final STO를 작성하여 각 계측치를 수평, 수직 기준선에 대해 거리를 측정하여 비교하였다. 발치 그룹의 두 STO 비교 시 수직적으로 상악 중절치 절단연과 치근단, 상악 제1대구치 협측교두에서, 수평적으로 상악 중절치 절단연, 상악 제1대구치 근심협측교두, 하악 중절치 치근단, 하악 제1대구치 근심면과 근심협측교두에서 차이를 보였으며 비발치 그룹의 경우는 수직적으로 하악 중절치 치근단, 수평적으로 상악 중절치 절단연, 하악 중절치 절단연과 치근단, 하악 제1대구치 근심면에서 차이를 보였다. 두 STO의 차이와 initial STO 수립에 영향을 미칠 수 있는 여러 진단 요소와의 상관성 평가 시 상악 치열궁 공간 부족량이 상악 전치의 수평, 수직 및 제1대구치의 수평 위치 예측에 유의한 상관성을 가졌으며 두 그룹 모두 하악 전치 치축 각도와 하악 치열궁 공간 부족량이 하악 전치의 수평 위치 예측에 유의한 상관성을 보였다. Initial STO 작성과 술 전 교정 단계에서 이를 고려하여 진행한다면 좀 더 효율적인 치료 계획 수립 및 전체적인 치료 기간을 줄이는 것에도 도움이 될 것이라 생각한다.
본 실험은 폐경기 골다공증 여성의 교정치료에서 일어날수 있는 하악골의 구조의 변화와 에스트로젠 투여 효과를 추정하기 위한 연구의 일환으로 난소를 적출한 군과 에스트로젠 투여 및 비투여군으로 분류하고 미세방사선사진으로 하악골을 촬영하여 이의 골 면적을 측정하고 조직 변화를 관찰하였다. 생후 4개월된 Sprauge-Dawley계 백서 50마리를 난소적출(OVE)군, 난소적출후 에스트로젠 투여 (OVE-EST)군, sham operation 시행후 에스트로젠 투여(EST)군으로 분류하여 각군을 수술후 5주, 6주, 7주째 희생시켜 하악골을 적출한 후 좌측 하악골은 비탈회표본으로 제작하여 미세방사선사진을 통해 해면골을 관찰하고 면적을 측정하였으며 우측 하악골은 탈회표본으로 제작하여 병리조직학적인 소견을 관찰하여 다음과 같은 결과를 얻었다. 1. 하악골의 전체골면적에 대한 피질골의 비율분석에서 OVE군, OVE-EST군, EST군 모두에서 통계적으로 유의한 변화가 없었다. 2. OVE군은 대조군에 비해 5, 6, 7주째로 갈수록 골수강의 비율이 증가하였는데(p<0.05),백서의 난소제거가 하악골에서도 골소주를 소실시켜 골수강을 확장시켰다. 3. OVE-EST군은 5주째는 골수강의 비율이 약간 증가되어 있었으나 점차 감소하여서 7주째에 유의하게 적었고 (p<0.05), EST군은 6주째부터 골수강의 비율이 현저히 감소되었는데(p<0.05),에스트로젠이 골수강의 크기를 감소시키는 효과가 있음을 알수 있었다. 4. 미세방사선사진과 병리조직학적 소견상 OVE군에서 골수강들의 크기가 확장되었고 파골세포들이 불규칙한 변연부에서 다수 관찰된 반면, OVE-EST군은 점점 치밀해지는 골소주들로 골수강이 작아지는 양상을 나타냈고, EST군에서는 풍부하고 치밀한 골소주들로 골수강들의 크기가 작아졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.