• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.247-273
• /
• 1994

The purpose of this study was to evaluate the dental arch morphology and the occlusal characteristics in the Koreans from the dental-anthropological point of view. The sample consisted of dental stone casts obtained from 120 Korean adults and 142 Japanese adults. Japanese casts and Caucasian data had been preserved at the Dept, of Orthodontics of Tokyo Medical and Dental University. Tooth size and dental arch morphology of the Koreans were compared with that of the Japanese. On the other hand, the variations of 30 crown traits, categorized and quantitatively graded, were compared between two peoples and the frequency distribution of each crown traits were analyzed by means of Chi-square test. The results were summerized as followings ; 1. There was a significant sexual difference in dental arch length and width in the Korean, in which male had a longer and wider dental arch than female. There was a close resemblance for dental arch morphology between the Koreans and the Japanese, except for a little longer mandibular arch of the Japanese. 2. In general, Korean male had wider crown than female, particulary in central incisor,canine,1st molar of maxilla and canine, 1st and 2nd molar of mandible with significance. The Korean had wider maxillary first molar, smaller mandibular first and second molar than the Japanese in both sex. 3. In crown traits of the Korean, shovel-shaped incisor showed lower frequency distribution than in the Japanese, but higher than in the Caucasians. Frequency of incisor reduction was shown higher distribution than in the Japanese and the Caucasians. Carabelli's tubercle showed higher frequency distribution than in Japanese, but remarkably lower than in Caucasians.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.237-248
• /
• 1993

Although pantograph has been used to investigate whether the determinents of the mandibular movement were possible contributing factors of TMJ click, there was the problems to understand the role of tooth morphology upon the occurrence of click because of using appliance without tooth contacts. There Were advantages to evaluate the effects of tooth morphology upon the mandibular movements, because intraoral tracing device(Functiograph$^{(R)}$) had been obtained maintaining occlusal contact between the upper and lower natural teeth during mandibular movement. The purpose of this study was to record the mandibular eccentric movement quantitatively performed in 20 adult control subjects and 20 adult subjects with TMJ click and to investigate the effects of occlusion upon the occurrence of TMJ click. The obtained results were as follows : 1. The average ICP-P distance was $3.07{\pm}0.73mm$ in subjects with TMJ click, $2.14{\pm}0.85mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 2. The average ICP-P distance was $3.07{\pm}1.14mm$ in subjects with TMJ click, $2.61{\pm}0.96mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.05). 3. The average distance of right and left lateral movement was not statistically significant between subjects with TMJ click and control subjects. 4. The average lateral displacement from midline during RCP was $0.75{\pm}0.54mm$ subjects with TMJ click, $0.16{\pm}0.17mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 5. The average lateral displacement from midline during protrusive movement was $0.88{\pm}0.54mm$ in subjects with TMJ click, $0.20{\pm}0.23mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 6. The average angle of right and left lateral movement was $144.2{\pm}20.20^{\circ}$ in subjects with TMJ click, $138.15{\pm}20.09^{\circ}$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.464-473
• /
• 2006

Purpose: This study was performed to evaluate relationship between the inferior alveolar nerve injury and the findings of panoramic and tomographic images for preventing inferior alveolar nerve injury after the 3rd molar extraction. Material and Method: From April, 2005 to June, 2005, The 190 patients who visited in the Department of Oral and Maxillofacia Surgery, Chonnam National University Hospital and the panoramic radiographies were taken for extraction of the mandibular third molar, was selected. Among 215 mandibular third molars, Scanora tomographic imagings were taken in the 90 teeth which were overlaped to the mandibular canal in the panoramic imagies. In panoramic radiographies, the angulation, the level, the root morphology, and the superimposition sign of the mandibular third molars with the mandibular canal were evaluated. In the tomographic radiographies, the location and distance of the mandibular third molar from the canal were also evaluated. The relationships between these findings and the inferior alveolar nerve injury were examined. Results: In the panoramic findings, the inferior alveolar nerve injuries were occurred in the darkened roots (5 molars, 7%), the uncontinuous radiopaque image (3 molars, 7%), and the depositioned mandibular canal (2 molars, 10%). In the tomographic findings of 90 molars, 20 molars also had the superimposition imagies. Five molars in those molars (25%) had the inferior alveolar nerve injury after extraction. There were 10 patients who had the inferior alveolar nerve injury. The sensory was began to be recovered in 9 patients, except 1 patient, within 2 weeks, then fully recovered within 3 months. Conclusion: These results indicate that the depth mandibular third molar and the superimposition sign may be related with the risk of the inferior alveolar nerve injury after extraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.594-606
• /
• 1996

This study was intended to perform the relationships between mandibualr lateral deviation in facial asymmetry patients and morphology of the cranial vault. In 30 patients(males 14, female 16) using submento-vertical cephalograms that were taken in the pre-operaticve state and posteroanterioir cephalograms that were taken in centric occlusion before, immediate and long term after surgery. 1. Mean mandibular deviation was about $-3.12^{\circ}$and mean of absolute measurement was about $2.50^{\circ}$on the submento-vertical cephalograms. 2. On the submento-vertical cephalograms, there was no significant difference between non-deviation and deviation side but it had tendency that deviation side was larger than non-deviation side on the frontal portion of cranium(Y10 to Y6) and deviation side was smaller than non-deviation on the temporal portion of cranium(Y5, Y-1 to Y-5). 3. Mean mandibular deviation was about $1.40^{\circ}$and mean of absolute measurement was about $3.95^{\circ}$on the posteroanterioir cephalograms. 4. There was statistical significance on the influence of surgical change(PT2A-PT1A) to the relapse(PTLA-PT2A)(p<0.05). The more increasing of the change, the more relapse on the posteroanterioir cephalograms. 5. There was no statistical significance on the influence of degree of mandibular deviation to morphology of the cranium on the submento-vertical cephalograms. But it had tendency that the more mandibular deviation, the larger the non-deviation side on the anterior cranium and deviation side on the posterior cranium(p>0.05). 6. There was statistical significance on the influence of the degree of mandibular deviation on the posteroanterioir cephalograms to the difference between non-deviation and deviation side. The more increasing of mandibular deviation, the larger the non-deviation side on the Y4 to Y-6(p<0.05). 7. There was no statistical significance on the influence of difference between non-deviation and deviation side to the relapse on the posteroanterioir cephalograms. But it had tendency that the more increasing of the differece between non-deviation and deviation side, the more increasing the relapse on temporal of cranium.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.787-798
• /
• 1994

The purpose of this study was three-fold: i) to investigate the degree of asymmetry in Angle's Class III malocclusion patients and normal adults; ii) to determine the nature of difference existed between two groups; and iii) to investigate the correlationship between the degree of asymmetry and ANB and overbite in Angle's Class III malocclusion patients. The subjects consisted of 25 Angle's Class III malocclusion patients and 25 normal adults and the mean ages were 22.0 and 24.5 years, respectively. Their posteroanterior and lateral cephalograms were traced and analysed with three-dimensional approach. The results were as follows: 1. Asymmetry of Angle's Class III malocclusion group was significant in all regions except cranial base. Their horizontal asymmetry was seen in mandibular angle, maxillary and mandibular 1st molar, mandibular midline and menton. Vertical asymmetry was observed in maxillary 1st molar and mandibular shape and anteroposterior asymmetry in mandibular angle. 2. Nine variables indicating asymmetry were selected and each variable had similar discriminant score. 3. There was a little correlationship between An and asymmetric variable(MSR-B6) and its correlation coefficients was 0.3564. 4. There was no significant correlationship between overbite and asymmetric variables.

• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.147-156
• /
• 2001

The purpose of this study was to identify the difference of vertical movement of mandible according to Angle's molar relationship and by skeletal factors affect to vertical movement of mandible. 172(age ranged from 20 to 30) subjects who go to college within territory of Kwangju city without any experience of temporomandibular disorder, extraction and orthodontic treatment. were selected for this study. The subjects were classified into class I(male:30, female:49), class II(male:18, female:24) and class III(male:18, female:33) according to Angle's molar relationship. The distance was measured between incisal edge of maxillary and mandibular central incisor and between bottom of central fossa of maxillary and mandibular 1st molar with ruler. The arch length and width were measured on the diagnostic cast. Cephalometrics were taken and then traced. Landmarks were identified and analyzed. 1. Maximal interincisal opening of male is larger than that of female in class I, class II and class III. Among each group maximal interincisal distance is the largest in class III. Maximal intermolar distance of male is superior to that of female in class I, class II, and class III, but there is no siginficant difference among them. 2. On maximal opening movement of Angle's classification class I and class II, total mandibular length, mandibular ramal length, madibular inferior border length and upper arch width were important variables and facial length, upper arch length and lower arch length had negative relationship to that. On maximal opening movement of Angle's class III, the upper arch length, the lower arch length and anterior facial length were important variables especially when compared with class I and II, and upper arch width had negative relationship. These results suggest that maximal opening movement is affected by facial morphology in all classes, but each group is affected by different facial skeletal variables. Accordingly, facioskeletal variables might be considered as diagnosis and treatment to improve the amount of mouth opening.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.541-547
• /
• 2004

The aim of this study was to compare the initial apical file (IAF) length between the mesio-buccanl and mesio-lingual canals of the mandibular molar before and after early coronal flaring. Fifty mandibular molars with complete apical formation and patent foramens were selected. After establishing the initial working length of the buccal and lingual canal of the mesial root using the Root-ZX, radiographs were taken for the working length with a 0.5 mm short of #15 K-file tip just visible at the foramen under a surgical microscope (OPMI 1-FC, Carl Zeiss Co. Germany) at 25X. After early coronal flaring using the $K^3$ file, additional radiographs were taken using the same procedure. The root canal morphology and the difference in working length between the buccal and lingual canals were evaluated. These results show that the difference in the length between the mesio-buccal and mesio-lingual canals of the mandibular molar was $\leq$ 0.5 mm. If one canal has a correct working length for the mesial root of the mandibular molar, it can be used effectively for measuring the working length of another canal when the files are superimposed or loosening. In addition, the measured the working length after early coronal flaring is much more reasonable because the difference in the length between the mesio-buccal and mesio-lingual canals can be reduced.

• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.36-41
• /
• 2024

Purpose: This study aimed to generate virtual mandibular left first molar teeth using deep convolutional generative adversarial networks (DCGANs) and analyze their matching accuracy with actual tooth morphology to propose a new paradigm for using medical data. Methods: Occlusal surface images of the mandibular left first molar scanned using a dental model scanner were analyzed using DCGANs. Overall, 100 training sets comprising 50 original and 50 background-removed images were created, thus generating 1,000 virtual teeth. These virtual teeth were classified based on the number of cusps and occlusal surface ratio, and subsequently, were analyzed for consistency by expert dental technicians over three rounds of examination. Statistical analysis was conducted using IBM SPSS Statistics ver. 23.0 (IBM), including intraclass correlation coefficient for intrarater reliability, one-way ANOVA, and Tukey's post-hoc analysis. Results: Virtual mandibular left first molars exhibited high consistency in the occlusal surface ratio but varied in other criteria. Moreover, consistency was the highest in the occlusal buccal lingual criteria at 91.9%, whereas discrepancies were observed most in the occusal buccal cusp criteria at 85.5%. Significant differences were observed among all groups (p<0.05). Conclusion: Based on the classification of the virtually generated left mandibular first molar according to several criteria, DCGANs can generate virtual data highly similar to real data. Thus, subsequent research in the dental field, including the development of improved neural network structures, is necessary.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.253-265
• /
• 1988

This study was designed to compare the normal head posture group with the extended head posture group in order to investigate the relatinship between head posture and craniofacial morphology. The subjects were devided into two groups; one included 80 children with normal head posture and occlusion, and the other 60 malocclusion patients with extended head posture. Their lateral cephalograms were traced and analysed based on 38 selected items. The following conclusion were reached. 1. The craniocervical angulations in normal group; OPT to SN, CVT to SN, OPT to FH and CVT to FH angles were $101.7^{\circ},\;104.8^{\circ},\;91.7^{\circ}\;and\;100.7^{\circ}$, respectively. 2. Compared with normal group, experimental group showed increase in mandibular plane angle, decrease in facial plane angle, airway space and posterior facial height but, there were insignificant differences in anterior facial height and tongue level between two groups. 3. Of the craniocervical angulations, OPT to FH angle was most highly correlated to the variables of the craniofacial morphology. 4. The effect of craniocervical angulation on craniofacial morphology in experimental group was different from that in comparison of normal group and experimental group.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.161-165
• /
• 2015

Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.