• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.153-168
• /
• 2003

It is very important to arrange the artificial teeth correctly in bucco-lingual (labio- lingual) relation in reconstrcting dentition. Although many anatomic landmarks and techniques have been reported over the years, they are based on westerns. So this study was performd to examine the horizontal relations of mandibular teeth in Korean dentulous adults. 200 volunteers(mean age 22.9) who had natural dentition were selected. The impressions were taken with irreversible hydrocolloid impression material and mandibular study models were fabricated using class I dental stone. Then they were measured with 3-dimensional measuring device specially designed for this study. The results were as follows ; It is better to consider the lingual cusps of the lower posterior teeth as a guide than the linguoaxial surfaces of the lower posterior teeth, arranging the lower posterior teeth buccally to the line which starts from the mesial aspect of the lower canine and continue backward to the lingual aspect of the retromolar pad. It is better to arrange the fossae of the lower posterior teeth buccally to the line which starts from the cusp tip of the lower canine and continue backward to the top of the retromolar pad. The positions of the lower posterior teeth in the denture-bearing area ; considering the fossa as a guide, the 2nd premolar was positioned in center. considering the buccal cusp as a guide, the 1st molar and the 2nd molar were positioned in center. the distance ratio(d/a) was incresed constantly from the lower canine to the 2nd molar d ; the distance between the buccal vestibule(the lowest point) and the buccal cusp tips of the lower posterior teeth. a ; the distance between the buccal vestibule(the lowest point) and the lingual vestibule(the lowest point). The lower canine was positioned lingually($0.11{\pm}0.13$) than the labial vestibule, and the central incisor and the lateral incisor were positioned almost in the imaginary perpendicular plane of the labial vestibule(the lowest point).

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.387-398
• /
• 2022

Objective: Controlling the incisal inclination is fundamental in orthodontics. However, the relationship between the inclination prescription and its clinical outcome is not obvious, and the incisal inclination changes generated by different bracket prescriptions were investigated. Methods: Twenty-eight non-extraction dental Class II patients (15 females, 13 males; mean age = 12.9) were retrospectively analyzed. Patients were treated using passive self-ligating fixed appliances with three inclination prescriptions for maxillary incisors (high, standard, low), and two for mandibular incisors (standard, low). Clinical outcomes were compared among different prescriptions, and regression analysis was used to explain the effects of bracket prescriptions and to understand the prescription selection criteria (α = 0.05). Results: For maxillary central incisors, low and high prescriptions were related to linguoversion (p = 0.046) and labioversion (p = 0.005), respectively, while standard prescription maintained the initial dental inclination. Maxillary lateral incisors did not show significant changes. For mandibular incisors, low prescription led to linguoversion (p = 0.005 for central incisors, p = 0.010 for lateral incisors), while standard prescription led to labioversion (p = 0.045 for central incisors, p = 0.005 for lateral incisors). The factors affecting inclination changes were the imposed change and selected prescription, while prescription selection was influenced by the initial dental inclination and initial intercanine distance. Conclusions: The direction of correction of incisal inclination can be controlled by choosing a certain prescription, but the final inclination may show limited consistency with it. The amount of imposed inclination change was the most relevant predictor of the clinical outcome.

• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.9-14
• /
• 2020

Purpose: The purpose of this study was to evaluate vertical bone loss and alveolar bone thickness in the maxillary and mandibular incisors of patients with skeletal class III malocclusion. This study also aimed to evaluate the periodontal condition of class III malocclusion patients who had not undergone orthodontic treatment. Materials and Methods: The sample included cone-beam computed tomography scans of 24 Korean subjects (3 male and 21 female). Alveolar bone thickness (ABT), alveolar bone area (ABA), alveolar bone loss (ABL), and fenestration of the maxillary and mandibular incisors were measured using 3-dimensional imaging software. Results: All incisors displayed an ABT of less than 1.0 mm from the labial surface to root level 7 (70% of the root length). A statistically significant difference was observed between the mandibular labial and lingual ABAs and between the maxillary labial and mandibular labial ABAs. The lingual ABA of the mandibular lateral incisors was larger than that of the mandibular central incisors. ABL was severe on the labial surface. A statistically significant difference was observed between the maxillary and mandibular labial ABL values(21.8% and 34.4%, respectively). Mandibular lingual ABL (27.6%) was significantly more severe than maxillary lingual ABL (18.3%) (P<0.05). Eighty-two fenestrations were found on the labial surfaces of the incisors, while only 2 fenestrations were observed on the lingual surfaces. Fenestrations were most commonly observed at root level 6. Conclusion: Careful evaluation is needed before orthodontic treatment to avoid iatrogenic damage of periodontal support when treating patients with class III malocclusion.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.190-193
• /
• 2018

Background: This study was conducted to determine the effect of the distributional relationship between dental roots and the mandibular bone on single mandibular bone fractures, which are common craniofacial fractures. Methods: This was a retrospective, single-center study in Seoul, Korea. Patients with single mandibular fractures in the symphysis, parasymphysis, body, and angle area, with tooth structure involvement were included. The control group included patients with simple, bone-level lacerations without fractures. In total, 94 patients (72 males and 22 females) were included in the treatment group, and 125 (71 males and 54 females) were included in the control group. The height of the mandibular bone and the dental root were measured with panoramic radiography. The central incisor represented the symphysis area, the canine represented the parasymphysis area, the first molar represented the body area, and the second molar represented the angle area. Results: In the treatment group, symphysis fractures occurred in 16 patients (17%), parasymphysis fractures in 36 patients (38%), body fractures in 17 patients (18%), and angle fractures in 25 patients (27%). The ratios of the dental roots to the total height of the mandibular bone in the treatment group were 30.35%, 39.75%, 39.53%, and 36.27% for symphysis, parasymphysis, body, and angle areas, respectively, whereas in the control group, they were 27.73%, 39.70%, 36.76%, and 35.48%. The ratios of the treatment group were significantly higher than those of the control group. Conclusion: The results show that the higher ratio of the dental root to the height of the mandibular bone increases the fracture risk.

• The korean journal of orthodontics
• /
• v.47 no.3
• /
• pp.176-185
• /
• 2017

Objective: To evaluate the relationship of gingival thickness (GT) and the width of keratinized gingiva (WKG) with different malocclusion groups and the level of crowding. Methods: A total of 187 periodontally healthy subjects (121 females and 66 males) who presented at the Faculty of Dentistry in $Y{\ddot{u}}z{\ddot{u}}nc{\ddot{u}}$ Yil University for orthodontic treatment were enrolled in the study. The individuals involved in the study were divided into three groups; Angle Class I malocclusion, Angle Class II malocclusion, and Angle Class III malocclusion. Each group was classified as mild, moderate, or severe according to the level of crowding. WKG was determined as the distance between the mucogingival junction and the free gingival margin. GT was determined by the transgingival probing technique. Factorial variance analysis and the Duncan multiple comparison test were employed to identify the extent to which a difference was apparent between the groups according to these parameters. Results: It was determined that teeth in the mandibular anterior region display the thin gingival biotype. WKG and GT were observed as being higher at the mandibular incisor teeth in the severe crowding group and at the mandibular canine teeth in the mild crowding group. The GT of the mandibular right central and lateral incisors was found to be thinner in the Angle Class III group. Conclusions: Within the limits of this study, the results demonstrate that, there is no significant relationship of WKG and the mean GT in the mandibular anterior region according to the Angle classification.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.611-616
• /
• 1994

A major cause of missing permanent incisors is congenital abscence and extraction because of trauma and pathologic condition. The request for restoration of missing or spaced anterior teeth is common in dental practice. Problems, such as the tilting, drifting, and rotation of teeth adjacent to the space, complicate the restoration of apperance, and a normally simple restorative dental procedure may become difficult. There are two primary treatment alternatives to improving a dentition's irregular and spaced apperance-closing the space by orthodontic means or providing a prosthesis to disguise the space. The treatment choice depends on many variables, but, as a general rule, patients with a normal overbite, overjet, and buccal relationship are better treated by maintaining the sapce and providing a prosthesis, either fixed or removable. This case report presents two cases : Traumatic loss of maxillary right and left central incisors, Extraction of malformed mandibular right central inciosr. The loss of central incisor space was regained by the fixed-removable and fixed orthodontic appliance, and then Maryland bridge was cemented.

• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.150-160
• /
• 2022

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning. Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position. Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning. Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.693-702
• /
• 2005

Accurate timing and sequence of eruption of permanent teeth are indicies of growth and essential for pediatric dentistry and pediatric clinical orthodontics. From the children brought to the Yonsei Dental Hospital during 2001 to 2003, 654 boys and 542 girls, ranging in age from five to fourteen years, were selected and analysed. The following was concluded. 1. Eruption time of maxillary teeth is 6.81 years in boys, 6.78 years in girls for central incisor, 8.30 years in boys, 7.98 years in girls for lateral incisor, 10.28 years in boys, 10.04 years in girls for canine, 9.74 years in boys, 9.90 years in girls for first premolar, 10.87 years in boys, 10.41 years in girls for second premolar, 6.25 years in boys, 6.54 years in girls for first permanent molar, 12.21 years in boys, 12.03 years in girls for second permanent molar 2. Eruption time of mandibular teeth is 6.00 years in boys, 6.06 years in girls for central incisor, 6.99 years in boys, 6.74 years in girls for lateral incisor, 9.83 years in boys, 9.17 years in girls for canine, 9.92 years in boys, 9.75 years in girls for first premolar, 10.66 years in boys, 10.39 years in girls for second premolar, 5.99 years in boys, 5.75 years in girls for first permanent molar, 11.92 years in boys, 12.17 years in girls or second permanent molar. 3. The following eruption sequence was observed the first permanent molar erupted first, followed by the central incisor, the lateral incisor, the first premolar, the canine, the second premolar and the second permanent molar in the maxilla. The first permanent molar erupted first, followed by the central incisor, the lateral incisor, the canine, the first premolar, the second premolar and the second permanent molar in the mandible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.167-176
• /
• 1988

This study was designed to evaluate the morphology of the temporomandibular joint components and dentofacial characteristics of patients with clicking and painful temporomadibular joint. The materials consisted of 80 conventional pantomographs in normal an symptomatic individuals aged 18-23 and divided into 2 groups by symptom of temporomandibular joint. The results were as follows; 1. In morphologic analysis of condylar head, type Ⅰ (anterior, posterior smooth curve) was most dominant in both group(58.75%, 55.0%) and asymmetrical condylar shape was predominant in symptomatic group (18 cases, 45%). 2. In symptomatic group, the condylar width were slightly lesser and the ratio of condylar height to height of condyle-ramus were larger than those of normal group. 3. Vertical overlap of central incisor of symptomatic group was slightly larger than that of normal group. There was significant differences between each group in mandibular midline deviation. 4. The symptomatic group tended to steep mandibular plane angle and the degree of condylar path and condylar axis of normal group were larger than those of symptomatic group. 5. The condylar width was inversely correlated with inclination of condylar path and inclination of condylar path was correlated with condylar axis in both groups.