• 대한치과교정학회지
• /
• 제50권3호
• /
• pp.216-226
• /
• 2020

Root resorption can be caused by several factors, including contact with the cortical bone. Here we report a case involving a 21-year-old female with Angle Class II, division 1 malocclusion who exhibited significant root resorption in the maxillary right central incisor after orthodontic treatment. The patient presented with significant left-sided deviation of the maxillary incisors due to lingual dislocation of the left lateral incisor and a Class II molar relationship. Cephalometric analysis demonstrated a Class I skeletal relationship (A point-nasion-B point, 2.5°) and proclined maxillary anterior teeth (upper incisor to sella-nasion plane angle, 113.4°). The primary treatment objectives were the achievement of stable occlusion with midline agreement between the maxillary and mandibular dentitions and appropriate maxillary anterior tooth axes and molar relationship. A panoramic radiograph obtained after active treatment showed significant root resorption in the maxillary right central incisor; therefore, we performed cone-beam computed tomography, which confirmed root resorption along the cortical bone around the incisive canal. The findings from this case, where different degrees of root resorption were observed despite comparable degrees of orthodontic movement in the bilateral maxillary central incisors, suggest that the incisive canal could be an inducing factor for root resorption. However, further investigation is necessary to confirm this assumption.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.341-351
• /
• 1991

Dental maturity is one of the index of physiological maturity indicators. To investigate the relationship between dental maturity and chronological age, the author took the orthopantomograms of 984 students, aged 7 through 17 years, having normal occlusion. The orthopantomograms were examined and calcification degree of each tooth on the left side was rated according to the method described by Demirjian. On the basis of findings of this study, the following results were obtained. 1. The root completion periods of mandibular permanent teeth were as follows; Central Incisor M $8.32{\pm}1.03\;years$ F $7.96{\pm}1.04\;years$ Lateral Incisor M $9.40{\pm}1.30\;years$ F $9.01{\pm}0.90\;years$ Canine M $12.81{\pm}1.24\;years$ F $11.42{\pm}0.94\;years$ 1st Premolar M $12.76{\pm}1.74\;years$ F $12.19{\pm}1.33\;years$ 2nd Premolar M $13.31{\pm}1.88\;years$ F $12.88{\pm}1.49\;years$ 1st Molar M $9.60{\pm}1.69\;years$ F $9.30{\pm}1.16\;years$ 2nd Molar M $14.38{\pm}1.73\;years$ F $13.96{\pm}1.63\;years$ 2. Sexual differences in same age group at given calcification stage were not significant statistically. 3. The developmental order in mandibular permanent teeth was as follows; a) central incisor, b) lateral incisor, c) 1st molar, d) canine and 1st premolar, e) 2nd premolar, f) 2nd molar.

• Restorative Dentistry and Endodontics
• /
• 제49권1호
• /
• pp.2.1-2.12
• /
• 2024

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

• 대한치과의사협회지
• /
• 제58권4호
• /
• pp.194-205
• /
• 2020

Objective: The purpose of this study was to evaluate the accuracy of the inter-arch relationship of digital models generated using two types of intraoral scanners. Methods: In total, 34 plaster model samples were used. Two corresponding digital models were created using two types of intraoral scanners. A total of 15 variables were measured. The plaster model was directly measured using a digital caliper, while the digital models were measured using a software. The accuracy of the measurements was evaluated using repeated measures analysis of variance and the Friedman test. Results: Among the 15 measurements, 6 measurements[Overjet, Overbite, DZ_11-41 (Distance between the gingival zenith of maxillary right central incisor and mandibular right central incisor), DZ_16-46 (Distance between the gingival zenith of maxillary right first molar and mandibular right first molar), DZ_13-33 (Distance between the gingival zenith of maxillary right canine and mandibular left canine), and DZ_23-43 (Distance between the gingival zenith of maxillary left canine and mandibular right canine)]showed statistically significant differences, with DZ_23-43 showing the largest difference of 0.18 mm. The other measurements showed no statistically significant differences. Conclusions: Regardless of the type of scanner used for preparation, digital models can be used as clinically acceptable alternatives to conventional plaster models.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.142-145
• /
• 2001

소아치과에 내원한 환아 중에서 치아의 수에 따른 이상을 많이 관찰할 수 있는데 그 중의 하나가 과잉치이다. 과잉치는 정상 치판 (dental lamina)의 과도한 증식의 결과로 발생되며 유치열에서 $0.3\sim0.8%$, 영구치열에서는 $1.0\sim3.5%$의 발생빈도를 보인다. 2 : 1로 남자에게 호발하고 9 : 1로 상악에 호발하며 구치부보다 전치부에 많이 발생한다. 가장 호발하는 것은 상악 정중 과잉치로 상악 중절치 사이에 위치하며 하악 전치부에서는 2%로 낮은 빈도를 보인다. 본 증례는 파노라마 사진 촬영 결과 하악 좌우측 유중절치의 선천적 결손과 4개의 영구 절치외에 2개의 과잉치가 전치부에 관찰되어 발치와 교정치료를 통해 양호한 결과를 얻게 되어 보고하는 바이다.

• 대한치과교정학회지
• /
• 제38권3호
• /
• pp.175-186
• /
• 2008

본 연구는 술 전 교정치료 전 치아 이동 예측치(initial STO)와 술 전 교정치료 후 실측치에 바탕을 둔 STO (final STO)를 비교하고자 시행되었다. 부산대학교병원 치과교정과에 내원하여 교정 및 악교정수술 복합치료를 시행 받은 환자 중 하악만 수술한 환자 40명을 선정하여 상악 제1소구치 발치 여부에 따라 두 그룹(발치 그룹 20명, 비발치그룹 20명)으로 분류하였다. 술 전 교정치료 전의 initial STO, 술 전 교정치료 후의 final STO를 작성하여 각 계측치를 수평, 수직 기준선에 대해 거리를 측정하여 비교하였다. 발치 그룹의 두 STO 비교 시 수직적으로 상악 중절치 절단연과 치근단, 상악 제1대구치 협측교두에서, 수평적으로 상악 중절치 절단연, 상악 제1대구치 근심협측교두, 하악 중절치 치근단, 하악 제1대구치 근심면과 근심협측교두에서 차이를 보였으며 비발치 그룹의 경우는 수직적으로 하악 중절치 치근단, 수평적으로 상악 중절치 절단연, 하악 중절치 절단연과 치근단, 하악 제1대구치 근심면에서 차이를 보였다. 두 STO의 차이와 initial STO 수립에 영향을 미칠 수 있는 여러 진단 요소와의 상관성 평가 시 상악 치열궁 공간 부족량이 상악 전치의 수평, 수직 및 제1대구치의 수평 위치 예측에 유의한 상관성을 가졌으며 두 그룹 모두 하악 전치 치축 각도와 하악 치열궁 공간 부족량이 하악 전치의 수평 위치 예측에 유의한 상관성을 보였다. Initial STO 작성과 술 전 교정 단계에서 이를 고려하여 진행한다면 좀 더 효율적인 치료 계획 수립 및 전체적인 치료 기간을 줄이는 것에도 도움이 될 것이라 생각한다.

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.141-170
• /
• 1991

This study was to analyze the displacement and the magnitude and mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment teeth and the mandibular supporting bone when various abutment designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. The models of overdenture and mandibe with the canine and the second premolar remaining, were fabricated. In the first design, a 1 mm space was prepared between the denture and the dome abutment with the height of 2 mm(OS). In the second design, a contact between the denture and the occlusal third of the dome abutment with the hight of 2 mm was prepared(OC). In the third design, a 0.5 mm space was prepared between the denture and 8 degree tapered cylindrical abutments with the height of 7 mm(TS). In the fourth design, a contact between the denture and the occlusal two thirds of the conical abutments with the height of 7 mm was prepared(TC). In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 Kgs on the first molar region (P1) and 7 Kgs on the central incisor region (P2) in a vertical direction. The force of 10 Kgs was then applied distributively from the first premolar to the second molar of each motel in a vertical direction (P3). The results were as follows: 1. The vertical load on the central incisor region(P2) produced the higher displacement and stress concentration than that on the posterior region(P1, P3). 2. The case of space between abutment and denture base produced higher displacement than that of contact, and the case of long abutment produced higher displacement than that of short abutment because of low rigidity of denture base. 3. The magnitude of the torque and vertical force to the abutment teeth and the stress distribution to the denture base was higher in the telescope coping than in the overdenture coping. 4. The vertical load on the central incisor region(P2) produced higher equivalent stress in the mandible than that on the posterior region(P1, P3). 5. The case of space between abutment and denture base produced better stress distribution to the farther abutment from the loading point than that of contact. 6. In case of sound abutment teeth, the type of telescope coping can be used, hilt in case of weak abutment, the type of overdenture coping is considered to be favorable generally.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.185-195
• /
• 1991

This study was undertaken to grope the correlation of the maximal bite force and tooth-craniofacial structure. The maximal bite force of 76 adult male, aged 18-28 (mean aged: $23.4{\pm}2.2$) years, was estimated and cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. 59.61kg of bite force in first molar, 45.38kg in premolar and 17.10kg in central incisor were arranged. 2. The bite force was negatively correlated to genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and positively correlated to posterior height of face, length of mandibular body, length of ramus, facial depth in craniofacial structure. 3. The group with strong bite force showed small genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and long posterior height of face, length of mandibular body, length of ramus, facial depth. So they manifested the tendency to brachycephalic pattern, on the other hand, the group with weak bite force manifested the tendency to dolichocephalic pattern. 4. There is no correlationships between bite force and mesial inclination of premolar axis in this subject. 5. It is considered bite force have an effect upon craniofacial pattern, especially upon the lower face.

• 대한소아치과학회지
• /
• 제32권4호
• /
• pp.644-648
• /
• 2005

과잉치는 정상치판(dental lamina)의 과도한 증식의 결과로 발생되어 가족적 성향을 보이며, 쇄골두개이형성(Cleidocranial dysplasia), Gardner 증후군 등의 여러 질환과 관련되어 나타나기도 한다. 그 빈도는 유치열에서 $0.3{\sim}0.8%$, 영구치열에서 $1.0{\sim}3.5%$이고, 남성에서 호발되며(2 : 1), 상악에서 더 많이 발생한다(9 : 1). 상악에서는 mesiodens라고 불리는 중절치 사이의 위치가 가장 흔한 부위이고, 그 다음은 fourth molar와 측절치 부위이다. 하악에서는 소구치 부위가 가장 흔한 부위이고 전치부위에서는 약 2%로 매우 드물게 발생한다. 과잉치의 만기 잔존은 치간 이개, 인접한 치아의 맹출 장애, 치근 흡수 등을 야기하고 과잉치와 관련되어 함치성 낭종이 발생될 수 있으므로 조기진단과 적절한 치료가 중요하다. 본 두 증례는 비교적 드물게 나타나는 하악에 발생한 과잉치로, 하악 전치부와 소구치부에 발생한 과잉치를 발거하고 교정치료를 시행하여 양호한 결과를 얻었기에 보고하는 바이다.

• 대한치과교정학회지
• /
• 제48권4호
• /
• pp.224-235
• /
• 2018

Objective: The purpose of this study was to compare the skeletal, dental, and soft-tissue treatment effects of nonextraction therapy using the modified C-palatal plate (MCPP) to those of premolar extraction (PE) treatment in adult patients with Class II malocclusion. Methods: Pretreatment and posttreatment lateral cephalographs of 40 adult patients with Class II malocclusion were retrospectively analyzed. The MCPP group comprised 20 patients treated with total arch distalization of the maxillary arch while the PE group comprised 20 patients treated with four PE. Fifty-eight linear and angular measurements were analyzed to assess the changes before and after treatment. Descriptive statistics, paired t-test, and multivariate analysis of variance were performed to evaluate the treatment effects within and between the two groups. Results: The MCPP group presented 3.4 mm of retraction, 1.0 mm of extrusion, and $7.3^{\circ}$ lingual inclination of the maxillary central incisor. In comparison, the PE group displayed greater amount of maxillary central incisor retraction and retroclination, mandibular incisor retraction, and upper lip retraction (5.3 mm, $14.8^{\circ}$, 5.1 mm, and 2.0 mm, respectively; p < 0.001 for all). In addition, the MCPP group showed 4.0 mm of distalization and 1.3 mm of intrusion with $2.9^{\circ}$ distal tipping of the maxillary first molars. Conclusions: These findings suggest the MCPP is an effective distalization appliance in the maxillary arch. The amount of incisor retraction, however, was significantly higher in the PE group. Therefore, four PE may be recommended when greater improvement of incisor position and soft-tissue profile is required.