• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.225-234
• /
• 1998

We used five adult dog mandibles embedded in resin block and six different cross-sectional planes for each mandible were choosen. According to the angle of mandibular occulsal plane to vertical plane(mandibular angle) and gantry angle of CT machine, we classified 4 experimental groups and 1 control group. The control group images were taken at the mandibular angel 0° and gantry angle 0°. The experimental images were taken at the mandibular angle 15° and gantry angle 0°(group 1); 30° and 0°(group 2); 15° and 15°(group 3) ;30° and 30°(group 4), respectively. Using the reformatted cross-sectional images, the distance from the mandibular canal to the alveolar crest and the distance from the mandibular canal to the buccal cortex and to the lingual cortex was measured and compared. The obtained results were as follows: 1. The distance from the mandibular canal to the alveolar crest of group 1 and 2 was larger than control group, but the distance of group 3 and 4 was smaller. The distance from the mandibular canal to the buccal cortex and to the lingual cortex of all experimental groups was smaller than control group. 2. The distance from the mandibular canal to the alveolar crest showed the largest difference from control group in all experimental groups, especially in group 2 and 4(p<0.05). 3. In the distance from the mandibular canal to the alveolar crest, the number of deviation value under 1 mm was 20 in group 3 and was 11 in group 2 and 4, respectively. 4. The deviation value of the distance from the mandibular canal to the buccal cortex and to the lingual cortex was under 1 mm in most cases.

• Archives of Craniofacial Surgery
• /
• v.18 no.2
• /
• pp.73-75
• /
• 2017

The management of mandibular angle fractures is often challenging and results in the highest complication rate among fractures of the mandible. In addition, the optimal treatment modality for angle fractures remains controversial. Traditional treatment protocols for angle fractures have involved rigid fixation with intraoperative maxillomandibular fixation (MMF) to ensure absolute stability. However, more recently, non-compression miniplates have gained in popularity and the use of absolute intraoperative MMF as an adjunct to internal fixation has become controversial. In this article, the history of, and current trends in, the treatment of mandibular angle fractures will be briefly reviewed. In addition, issues regarding the management of the third molar tooth will be discussed.

• Journal of Oral Medicine and Pain
• /
• v.41 no.2
• /
• pp.41-47
• /
• 2016

Purpose: The purpose of this study was to analyze the size and morphology of mandibular condyle and mandibular fossa between temporomandibular joint (TMJ) disc displacement (DD) patients and healthy subjects using cone-beam computed tomography (CBCT). Methods: Twenty healthy subjects and twenty TMJ DD patients participated in this study respectively. We made five measurements in mandibular condyle (medio-lateral dimension, antero-posterior dimension, condyle height, intercondylar distance and intercondylar angle) and two measurements in mandibular fossa (mandibular fossa depth and articular eminence angle) using CBCT image. Results: There was no difference between two groups in medio-lateral dimension. In case of antero-posterior dimension, average of healthy controls was larger than that of TMJ DD patients, but that was not significant statistically. There were no significant differences between two groups in condyle height. Comparing intercondylar distance and intercondylar angle between two groups, there was no significant difference between two groups. In comparison of mandibular fossa depth and articular eminence angle, there was no significant difference between two groups. Conclusions: We couldn't find any definite relationship between TMJ morphology and TMJ DD.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.109-116
• /
• 1992

To determine the horizontal inclination of the condylar long axis without taking the submentovertex radiograph, the author studied the interrelation between the angle formed by the midsagittal plane and the mandibular angle and the horizontal inclination of the condylar long axis. In 56 subjects, the author measured the angle formed by the midsagittal plane and both mandibular angle using the modified Twirl Bow and the horizontal inclination of the both condylar long axis from submentovertex radiographs. The result were as follows: The mean value of the angle formed by the midsagittal plane and the mandibular angle was l8.50±1.48° in right side and 19.30±1.55° in left side. The mean value of the horizontal inclination of the condylar long axis was 19.25±7.56° in right side and 20.27±7.050 in left side. The interrelation of the two angles was represented as follows: y = 20.31-0.0094× (r = -0.482, p<0.01) in right side and y = 20.64-0.066×(r =-0.301, p<0.05) in left side (y; the horizontal inclination of the condylar long axis, x; the angle formed by the midsagittal plane and the mandibular angle).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.6
• /
• pp.483-489
• /
• 2011

Purpose: Craniofacial structure form results from the adaptation to morphologic and functional changes in their neighboring structures for a mutual balance. The purpose of this study is classification of maxillomandibular complex growth pattern follow by cranial base growth pattern. And this study is identifying the correlation between maxilla-mandibular complex growth pattern and orthodontic criteria. Methods: 142 Class III malocclusion patients had orthognathic surgery at Wonkwang University Dental Hospital during April 2004 to October 2010. Patients were divided into 4 groups and the correlation between cranial base and maxillomandibular growth patterns were evaluated. Results: There was a correlation between cranial base and maxillomandibular growth patterns. Positive relationships were found between the occlusal plane, Incisor mandibular plane angle, mandibular plane, positioning of pogonion and the saddle angle, indicating maxillary growth patterns. Negative relationships were found between SNA, SNB, maxillary incisor angle and saddle angle. Positive relationships were found between the ratio of the anterior and posterior cranium, positioning of pogonion and the percentage of cranial depth indicating mandibular growth patterns. Negative relationships were found between the occlusal plane, maxillary incisor angle, mandibular plane, mandibular angle and cranial depth. Conclusion: Cranial base and maxillofacial growth patterns were correlated and the classification should be adjusted before orthognathic surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.397-400
• /
• 2007

In an open reduction of the mandibular angle fracture, it is crucial to approximate each fracture segment as closer as possible for the reduction of the healing period. In this case report, we proposed a new technique for the mandibular angle fracture. This was designed to minimize the gap between two separated segments using mini-implants and surgical wires. Mini-implants were placed around the fracture line, followed by wire ligation to minimize the fracture gap. And then internal fixation was easily employed with plates and screws. The advantages of this technique were reduced time for operation, the promotion of healing, rapid functional recovery, and few complications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.173-181
• /
• 2003

Purpose : This study was intended to evaluate the positional relationship between the hyoid bone and the mandible in patients with mandibular protrusion after mandibular set-back surgery by means of 3D-CT. Materials and methods : Preoperative(3 weeks before) and postoperative (6 weeks after) 3D-CT & cephalogram were taken on 32 patients(12 male, 20 female, mean age of 23.2) treated by bilateral sagittal split osteotomy with rigid fixation. The angular measurement on 3D-CT basilar view were deviation of Me & H, long axis angle of left & right cornu majus. The lineal measurement on 3D-CT basilar view were composed of intercondylar line and coordinates(x,y) of Me & H. The angular & lineal measurement of lateral cephalogram were composed of mandibular plane angle, SNA, SNB, ANB, FH-NA & FH-NB, and coordinates(x,y) of B, Pog, Me & H, PAS, Lpw, MPH and IAS. On the frontal cephalogram, deviation of Me were evaluated. Results : The mean mandibular set-back was 8.0mm horizontally and mandibular plane angle was slightly increased. The hyoid bone was displaced postero-inferiorly, the distance between MP(mandibular plane) and H(hyoid bone) was increased and the posterior airway space values (PAS, Lpw, IAS) were decreased. The coordinates Me(x,y), H(x,y) and deviation angle Me'& H' were revealed the strong positive correlation. Conclusion : The results revealed that the horizontal, vertical and transverse relationship of the mandibular and the hyoid bone movements were significantly correlated in patients performed mandibular set-back surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.4
• /
• pp.229-239
• /
• 2009

The purpose of this study is to evaluate the change in condylar position, width, and angle before and after orthognathic surgery using 3-dimensional computed tomograph. Pre and posterative 3-D CT was taken on 38 patients and through axial, frontal, sagittal measurements and by 3-dimensional reconstruction, the changes in condylar postion, mandibular width and angle were analyzed and others such as the difference in gender, operation and fixation method, setback length and in relation with temporomandibular disorders were done together too. The results were as follows: The inward rotation of condyle in axial condylar angle, the forward movement of right condyle in sagittal anterior-posterior distance, the superior movement of both condyles in sagittal superior-inferior distance, the decrease in gonial angle, the increase in mandibular width, the decrease in distance between the axial coronoid process distance and the increase in the frontal intercondylar distance were statistically significant. There were no statistically significant changes in gender difference, however in the difference in operation method, change in the gonial angle was observed and there was more change in bilateral sagittal split osteotomy group compared to two-jaw surgery group. In the difference in fixation method, the decrease in axial coronoid process distance and the change in sagittal anterior-posterior distance were statistically significant. In the difference in setback, the increase in setback didn't relate directly with the increased change in condyle position. In the relation with temporomandibular disorder, changes in left axial condylar angle and axial coronoid process distance were statistically significant. Changes in condylar position could be observed after the orthognathic surgery but it doesn't seem to have much of a clinical importance. The orthognathic surgery is effective in decreasing the mandibular angle, and it is not related with the temporomandibular disorder.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.3
• /
• pp.222-225
• /
• 2006

The treatment objective of mandibular fracture is a return to normal function. According to Champy, a rigid fixation of mandibular angle fracture is performed by using 4 or 6 holes titanium miniplates on the external oblique ridge of mandible. However, the limitations of metal plate such as hypersensitivity, interference with the cranio-facial growth of growing child, secondary bone resorption around the plate, foreign body reaction, declination of primary callus formation, and bone atrophy due to the lack of normal stress reaction of the bone have been reported. Recently, biodegradable miniplate has been introduced and used as an alternative to the metal plate despite its lower strength than that of the titanium plate and the side effect caused by the resorption in the body. In this study, 61 patients diagnosed as mandibular angle fracture and treated from Jan. 1998 to Dec. 2004 in our department have been reviewed. Metal plate fixation was used in 50 patients and biodegradable plate fixation in 11 patients on the external oblique ridge around the fractured mandibular angle according to the principle of monocortical osteosynthesis by Champy. We compared the incidence of side effects and the degree of bony union at the mandibular inferior border in two different fixation methods. In conclusion, we have found that one miniplate regardless of matter could provide enough strength to grasp bony fragments of the tension site and compress the inferior border of mandible without any complications.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.787-798
• /
• 1994

The purpose of this study was three-fold: i) to investigate the degree of asymmetry in Angle's Class III malocclusion patients and normal adults; ii) to determine the nature of difference existed between two groups; and iii) to investigate the correlationship between the degree of asymmetry and ANB and overbite in Angle's Class III malocclusion patients. The subjects consisted of 25 Angle's Class III malocclusion patients and 25 normal adults and the mean ages were 22.0 and 24.5 years, respectively. Their posteroanterior and lateral cephalograms were traced and analysed with three-dimensional approach. The results were as follows: 1. Asymmetry of Angle's Class III malocclusion group was significant in all regions except cranial base. Their horizontal asymmetry was seen in mandibular angle, maxillary and mandibular 1st molar, mandibular midline and menton. Vertical asymmetry was observed in maxillary 1st molar and mandibular shape and anteroposterior asymmetry in mandibular angle. 2. Nine variables indicating asymmetry were selected and each variable had similar discriminant score. 3. There was a little correlationship between An and asymmetric variable(MSR-B6) and its correlation coefficients was 0.3564. 4. There was no significant correlationship between overbite and asymmetric variables.