• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.586-589
• /
• 2006

Deep circumflex iliac artery (DCIA) flap can be harvested as a composite free flap and is often used to adequately reconstruct wide mandibular defects. However, the harvesting of this DCIA flap can result in severe osseous defect of the donor site causing a morphologic defect in the iliac crest. To reconstruct this defect of the iliac donor site, several innovative techniques using bioactive ceramic spacers, autogenous rib bone, polylactic acid mesh, or titanium plates have been introduced. Nonetheless, these methods have not been widely used due to high cost, secondary donor site morbidity, difficulty of use, and postoperative dissatisfaction. We used two titanium plates to reconstruct the donor iliac site defect at the harvesting time of primary DCIA flap surgery in the 30-year old female with an ameloblastoma in the left mandible. Postoperatively, both iliac sites were relatively balanced and there were few complications. At the 2 years follow-up, there were no specific abnormal radiographic findings and the patient was very satisfied with her esthetic iliac contouring. In our report, we evaluate the effect of two titanium plates on the reconstruction of the iliac donor site in the aspects of esthetics and usefulness. This technique has many advantages, such as reduced cost, simplicity, decreased postoperative pain or discomfort, and improved bilateral balance of both anterior iliac crest contours, especially in young female patients.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.475-480
• /
• 2009

Purpose: To correct the facial asymmetry and to achieve symmetry and balance, not only the soft tissue restoration of deficits but also creation and facial contour line such as mandible border and angle is important. Micro fat graft has limitation such as high resorption rate and somewhat limited ability to emphasize the rigid bony characteristics of the mandible angle due to its innate soft consistency. We have investigated the advantages of dermal fat graft over micro fat graft to correct asymmetry of the lower face in patients who had undergone mandibular reconstruction or distraction, using comparative analysis. Methods: Total of 12 patients were enrolled in our study: 6 micro fat graft and 6 dermal fat graft. Postoperative results were compared and analyzed at immediate postoperative period and more than 1 year later in each group with photographs, and analysised with image J program. Result: No complications were noted both in the micro fat type and the dermal fat type of procedures such as fat necrosis or micro calcifications. All of the patients who received micro fat graft, however had considerable amount of fat resorption after the procedure which led to two additional fat graft procedures. Although minor contour obliteration due to contracture was seen in patients who had undergone dermal fat graft procedure, no definite resorption was found even after more than one year follow-up. Results of dermal fat graft patients were satisfactory in terms of mandible angle symmetry. Secondary revision was necessary in one case due to overcorrection using dermal fat graft. Conclusion: The dermal fat graft has many advantages over the conventionally more popular micro fat graft to correct asymmetry of the lower face following mandible reconstruction owing to its lower resoption rate, more effective in emphasizing the natural curvilinear anatomical contours of the mandible angle and body and lower complication rates such as fat necrosis or micro calcifications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.158-166
• /
• 2009

The application of CT with basis on 3 dimensional-reconstruction is getting more widely practiced. With the data obtained from cone-beam computed tomography(CBCT), not only the diagnosis of the patient with skeletal abnormality but also the virtual simulation of the orthognathic surgery were performed and its application would be popular in orthodontic field. We reported a case, a 19-year old man who was diagnosed mandibular prognathism and required orthognatic surgery. In this case, the virtual orthognathic surgery was simulated and surgical wafer was fabricated by using CBCT data. That wafer was applied the actual orthognathic surgery. After preoperative orthodontic treatment, we prepared surgery as follows. : (l)Acquisition of 3D image data, (2)Reconstruction of 3-dimensional virtual model, (3)Virtual model surgery, (4)Extraction of stere-olithographic image, (5)Check-up for occlusal interference, (6)Fabrication of surgical stent by stereolithography. Bilateral sagittal split ramus osteotomy was operated and used stereolithographic surgical stent. 1 month later, we superimposed CBCT datas of virtual surgery and that of actual surgery, and then compared the result. CT data's application for othognathic surgery yielded satisfactory outcomes.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.5
• /
• pp.419-424
• /
• 2009

Odontogenic myxoma, a rare tumour that occurs in the jaws, locally invasive, destructive tumors that do not metastasize to lymph nodes. Large odontogenic myxoma on mandible is treated by mandibulectomy, defected mandible is reconstructed by bone graft. Reconstructed mandible is difficult to reconstruct dentition using implant because of deficiency of bone amount. So it is necessary to additional bone graft. But a poor aspect of soft tissue lead to unsatisfactory result. Because of distraction osteogenesis is possible to reconstruction of an amount of bone and soft tissue, that is advantage to reconstruction of alveolar bone on reconstructed mandible. We report with review of literatures the 25 years old male patient who had odontogenic myxoma in left mandible, was undergone mandibulectomy and successfully implant installation and prosthetic restoration after distraction osteogenesis(Track $Plus^{(R)}$, KLS Martin, Germany) on the reconstructed mandible with a free iliac bone graft, and we have conservative and successful result.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.141-153
• /
• 2022

Purpose: This study aimed to identify the prevalence and extension of the anterior loop (AL) of the mental nerve in different populations and according to different cone-beam computed tomography (CBCT) imaging settings. Materials and Methods: Medline/PubMed, Embase, Scopus, Web of Science, and ProQuest were searched. The main inclusion criterion was ALs evaluated in CBCT images. The quality of studies was assessed with the Joanna Briggs Institute risk of bias checklist. Subgroup analyses were conducted for sex, side, continent, voxel size, field of view, and type of CBCT-reconstruction images with a random-effects model. Results: Sixty-three studies with 13,743 participants (27,075 hemimandibles) were included. An AL was found in 40.6% (95% CI: 32.8%-48.9%, P<0.05) of participants and 36.0% (95% CI: 27.5%-45.5%, P<0.05) of hemimandibles, in 34.9% (95% CI: 25.1%-46.2%, P<0.05) of males and 34.5% (95% CI: 23.5%-47.4%, P<0.05) of females. The average length of ALs was 2.39 mm (95% CI: 2.07-2.70 mm, P<0.05). Their extension was 2.13 mm (95% CI: 1.54-2.73 mm, P<0.05) in males and 1.85 mm (95% CI: 1.35-2.36 mm, P<0.05) in females. Significant differences were observed regarding the prevalence and length of ALs among continents and for its measured length on different CBCT-reconstruction images, but not between other subgroups. Conclusion: AL was a relatively common finding. The voxel size and fields of view of CBCT devices were adequate for assessing AL; however, a 2-mm safety margin from anatomical structures(such as the AL) could be recommended to be considered when using CBCT imaging.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.369-375
• /
• 2011

In dental radiography, panoramic views cause distortion and thus may bring about inaccurate results in the process of quantitative analysis. In this connection, there has recently been an increasing use of cone beam computed tomography (CBCT) that is known to provide high-resolution images and positional information. In this study, a dental computed tomography unit, 'DCT-90-P IMPLAGRAPHY (Vatech, Korea)', was applied to 20 patients for 24 seconds respectively, with a tube voltage of 85kVp and a tube current of 7mA. The data of CBCT were three-dimensionally reconstructed by use of a computer program, and were histomorphometrically analyzed. The results showed that the diameter of mandibular canal is less distorted at a certain inclination of the mandibular body. The image tends to seem more distended in proportion to the distance between the subject and film. Also, the image tends to be affected according as it is out of focus. In conclusion, it requires that the image should be reconstructed in light of anatomic position and structure.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.212-220
• /
• 2024

PURPOSE. This cone-beam computed tomography (CBCT) study aimed to analyze the anatomical characteristics of alveolar bone at mandibular first molar (MFM) and their implications for immediate implant placement surgery. MATERIALS AND METHODS. 100 patients with 140 MFMs were reviewed retrospectively. We first performed a 3D reconstruction of the patient's CBCT data to determine a reference plane with ideal implant placement and orientation. The following parameters of MFM region were analyzed: mesial-distal socket size (MDSS), buccal-lingual socket size (BL-SS), root furcation fornix to inferior alveolar nerve (IAN) distance (RF-I), interradicular bone thickness (IRB), mesial/distal root apex to the IAN distance (MRA-I/DRA-I), thickness of the buccal/lingual bone of the mesial root (MR-B/MR-L), thickness of the buccal/lingual bone of the distal root (DR-B/DR-L). RESULTS. The MD-SS of MFM was 8.74 ± 0.76 mm, and the BLSS was 8.26 ± 0.72 mm. The MR-B, DR-B was 1.01 ± 0.40 mm and 1.14 ± 0.50 mm, and the difference was statistically significant (P = .001). The values of the MR-L, DR-L were 2.71 ± 0.78 mm and 3.09 ± 0.73 mm, and the difference was also statistically significant (P < .001). The mean distance of RF-I was 15.68 ± 2.13 mm, and the MRA-I was 7.06 ± 2.22 mm, which was greater than that of DRA-I (6.48 ± 2.30 mm, P < .001). The IRB at 2 mm, 4 mm apical from the furcation fornix, and at apex level was 2.81 ± 0.50 mm, 3.30 ± 0.62 mm, and 4.44 ± 1.02 mm, respectively. CONCLUSION. There is relatively sufficient bone mass in interradicular bone in height, but an adequate width is lacking for the bone between the mesial and distal root after the extraction of the MFM for immediate implantation. The thickness of the MFM buccal bone is relative thin, especially for the mesial root.

• Imaging Science in Dentistry
• /
• v.46 no.4
• /
• pp.279-284
• /
• 2016

To our knowledge, the imaging features of costochondral grafts (CCGs) on cone-beam computed tomography (CBCT) have not been documented in the literature. We present the case of a CCG in the facial soft tissue to the anterior mandible, with changes mimicking a cartilaginous neoplasm. This is the first report to describe the CBCT imaging features of a long-standing graft in the anterior mandible. Implants or grafts may be incidental findings on radiographic images made for unrelated purposes. Although most are well-defined and radiographically homogeneous, being of relatively inert non-biological material, immune reactions to some grafts may stimulate alterations in the appearance of surrounding tissues. Biological implants may undergo growth and differentiation, causing their appearance to mimic neoplastic lesions. We present the case of a cosmetic autogenous CCG that posed a diagnostic challenge both radiographically and histopathologically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.151-162
• /
• 1993

The author installed $3.75mm\times10mm$ $Br{\aa}nrmark$ osseointegrated implants and $3.5mm\times8mm$ I.T.I. hollow screw implants(Benefit) as a free standing abutment to replace lower left and right molars of 44-year-old female patient. Form the foregoing procedure, the author obtained the following results. 1. Free-standing $Br{\aa}nrmark$ and I.T.I. Hollow screw implants(Benefit) could be used to replace molars effectively without reduction of adjacent natural teeth, 2. Rotation of occlusal gold screw of $Br{\aa}nrmark$ implants was observed under occlusal force. 3. Adjustment of height of I.T.I. abutments was necessary in the mandibular second molar because of the limited occlusal clearance. 4. Form the oral examination, patient comments, panoramic and periapical radiographs, there were no pain, gingival imflammation and mobility, but slight reduction of alveolar bone level was shown around both implant systems. 5. Patient comments were comfortable on both systems. but the patient complained about economic problem of $Br{\aa}nrmark$ system and long treatment treatment time of both systems.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.4
• /
• pp.317-320
• /
• 2016

A 47-year-old woman was referred for surgical treatment of osteomyelitis of the mandible. She had already undergone three previous surgeries. Pre-anesthetic airway evaluation predicted a difficult airway, due to the thin, retro-positioned mandible, tongue, and atrophic changes in the lips and soft tissue. We inserted packing gauzes in the buccal mucosa for easier mask fitting and ventilation. During direct laryngoscopic intubation with a nasotracheal tube (NTT), fracture of a thin mandible can easily occur. Therefore, we used a fiberoptic bronchoscope to insert the NTT. After surgery, we performed a tongue-tie to protect against airway obstruction caused by the backward movement of the tongue during recovery. The patient recovered without any complications. We determined the status of the patient precisely and consequently performed thorough preparations for the surgery, allowing the patient to be anesthetized safely and recover after surgery. Careful assessment of the patient and airway prior to surgery is necessary.