• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.61-65
• /
• 2014

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the ${\beta}$ angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean ${\beta}$ angle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, ${\beta}$ angle showed no significant difference in different types of facial growth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.4
• /
• pp.476-490
• /
• 1991

Although various technical details of the surgical procedures have been improved, Skeletal relapse is the most noteworthy complication of orthognathic surgery. It seems to be an imbalance of the perioral muscular groups resulting from changes in the cavitas oris propria after surgery. Among other factors, it is widely known with the changes of tongue posture, as indicated by the hyoid position. Ten patients that had undergone mandibular setbacks by way of Modified Obwegeser method were evaluated retrospectively. The serial cephalometric films were taken preoperatively, immediately postoperatively, after removal of IMF, and at a subsequent long-term follow-up period. The cephalometric evaluation of tongue posture were based on stable craniofacial landmarks. The relation between the 2-dimensional changes of tongue posture and hyoid position and the relapse of mandibular setback are discussed. Anatomic changes that were found to accompany such setback are as follows. 1.There are 2 cases of relapse in 10 patients at long-term follow-up(20%) 2.The tongue was moved posteriorly and its size was reduced anteriorly and posteriorly at immediate postoperative change and then the mandible shifted slightly toward the preoperative position, but the long was adapted to its new environment due to changing the position of its posterior part, and also the hyoid that moved posterioly and inferiorly was stabilized sightly posteriorly than its original position. 3.On the distance change of the suprahyoid muscle, the distance of P-H, ST-H was increased at immediate postoperative change(p<0.01) and decreased at IMF period(p<0.001), but the distance of H-Me, H-Ge was slightly decreased at IMF and long-term period(p<0.05). 4.On the width change of the pharyngeal air way, the width of the upper part of the pharyngeal space was lightly contracted at IMF and long-term period(p<0.05). 5.On the relation between mandibular setback and tongue posture and hyoid position, the significant correlation was found between the changes of some parts of mandibular setback and those of tongue posture, and not found those of hyoid position.

• The Journal of the Korean dental association
• /
• v.12 no.2
• /
• pp.123-129
• /
• 1974

The electrical activities of masseter muscle were recorded on 9 subjects with unilateral fracture of mandible. The electromyographic studies were executed with 2 channel RS dynograph recorder for electromyography. The graphs were recorded in the physiologic rest position, incisal occlusion, molar occlusion, left lateral excursion, right lateral excursion, and protraction. The following conclusions were drawn; 1. In the physiologic rest position, incisal occlusion, molar occlusion, and protraction, the electrical potentials of the masseter muscle were greater in the affected side. 2. In the right lateral excursion, the electrical potentials of the masseter muscle were greater in the right side, and in the left lateral excursion, greather in the left side. There is no correlation mutually between the affected side and unaffected side.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.211-220
• /
• 1997

This article describes verticsal dimension in its histologic and clinical aspect. Determination of correct vertical dimension of occlusion is one of the most important steps in prosthodontic rehabilitation. It is considered essential for improvement of facial esthetics and stomatognatic functions. Many techniques have been sued for measurement of the vertical dimension in dentulous and edentulous patients : pre-extraction record, physiologic rest position, swallowing, phonetics, esthetics, etc. But, there is no universally accepted or completely accurate method. Though a great deal of energy has been spent trying to find the exact position of the mandible, there is an controversial aspect of vetical dimension.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.5
• /
• pp.251-258
• /
• 2016

Objectives: The aim of this retrospective study was to investigate factors associated with increased difficulty in the surgical extraction of impacted lower third molars and to improve identification of difficult cases. Materials and Methods: A total of 680 patients who required 762 surgical extractions of impacted lower third molars from 2009 to 2014 were enrolled in the study. Demographic factors, clinical factors, radiographic factors, surgical extraction difficulty, and presumed causes of difficulty were collected. Data were statistically analyzed using IBM SPSS Statistics version 23. Results: Age, sex, depth of impaction, and blurred radiographic image influenced difficulty in surgical extraction. The position of the impacted tooth influenced surgical difficulty, especially when it was accompanied by other factors. Conclusion: It is challenging to design a reliable and practical instrument to predict difficulty in surgical extraction of impacted lower third molars. To identify very difficult cases, root investigation using computed tomography is advised when impacted tooth position suggests difficult extraction.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.127-131
• /
• 2007

Purpose: To measure the differences of the splint pin angulation and the position of the planned implant site after conventional tomographic analysis. Materials and Methods: The angulation and the location of the metal splint pin retained in acrylic stent were compared with the corrected angulation and the location of the implant fixture on the 331 tomographic images. Results: The stent pins were located buccal in 40%, lingual in 10% to the corrected implant site after analysis of the conventional tomographic image. The angle and the location of the maxillary splint pin were mainly directed buccal on incisor and canine regions. The angle and the location of the splint pins in premolar and molar regions needed less corrections in both maxilla and mandible. Conclusions: This study demonstrated that the use of tomographs was essential for successful dental implant planning.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.241-255
• /
• 2002

This study was performed to evaluate horizontal and vertical characteristics according to lateral cephalometry of adult Korean skeletal Class II patients using a selected horizontal and vortical reference planes of Koreans. 60 males and 60 females consisting of freshman of Yonsei University from 1996 to 1997 and patients with history of orthognatic surgery at the Dental Hospital of Yonsei University with a skeletal Class II profile were chosen and compared with 70 males and 70 females with normal occlusion. The skeletal Class R group had the following conditions : 1. Profile composed of a retrognathic mandible or protrusive maxilla; 2. Class II molar and canine key; 3. ANB-greater than $4^{\circ}; 4$. Wits appraisal-greater than 1.0mm; Cephalometric analysis consisted of 22 skeletal, 25 soft tissue, 12 dental measurements. The results were as follows. 1. There was no considerable vortical measurement difference between the skeletal Class II malocclusion group and the normal occlusion group in skeletal analysis. But, some variations were found between the two groups in soft tissue analysis. 2. Mandibular length of the skeletal Class II malocclusion group was smaller than that of the normal occlusion group. Mandible was more posteriorly positioned in the Class II malocclusion group than in the normal occlusion group. 3. The length and antero-posterior position of the maxilla were not different between the Class II malocclusion and the normal occlusion group. 4. The antero-posterior position of the nose, upper lip and maxillary soft tissue, and nasolabial angle were not different between the two groups. 5. Mandibular soft tissue of the Class H malocclusion group was more posteriorly positioned than that of the normal. 6. The vertical measurements of the incisors(U1-HP, L1-HP) were bigger in the Class II malocclusion group than in the normal, but those of the molars(U6-HP, U6-MP) showed no significant difference between the two groups. 7 Classifying the skeletal Class II malocclusion group according to the antero-posterior position of both jaws, normally positioned maxilla and retruded mandible was 43.3%, both normally positioned maxilla and mandible 28.3%, both retruded maxilla and mandible 20.0%..

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.397-410
• /
• 2000

Skeletal class III had been classified by the position of the maxilla, the mandible, the maxillary alveolus, the mandibular alveolus and vertical development. This morphologic approach is simple and useful for clinical use, but it is insufficient to permit understanding of the pathophysiology of dysmorphoses. The author hypothesizes that there are different patterns of mutual relation of the skeletal components which have contributed pathologic equilibrium of skeletal class III. The purpose of this study are threefold: 1) to classify skeletal class III in subgroups, which can show the architectural characteristics of the deformity, 2) to analyse the craniofacial architecture of each subgroup on etio-pathogenic basis, and 3) to characterize and visualize the pattern as a prototype. Materials used in this study were lateral cephalograms of 106 skeletal class III adults, which were analysed with modified Delaire's architectural and structural analysis. Linear and angular measurements of the individual subject were obtained and cluster analysis was used for the subgrouping. Data were evaluated for verification of the statistical significances. The following results were obtained. 1. By the modified Delaire's architectural and structural analysis and cluster analysis, skeletal class III adults were classified into 7 clusters and presented as prototypes, which could show the pathophysiology of the skeletal architecture 2. There was significant relationship in measurement variables of each cluster, which could reflect characteristics of the skeletal pattern of growth. 3. The flexure of cranial base had a close relationship to the anterior rotational growth of the maxilla and contributes to understand the etio-pathology of skeletal class III. 4. The proportion of craniospinal area in cranial depth, craniocervical angle and vertical position of point Om had a close relationship to rotational growth of the mandible and direction of condylar growth. They contribute to understand the etio-pathology of skeletal class III. In summary, the cranium and the craniocervical area must be considered in diagnosis and treatment planning of dentofacial deformity. And the occlusal plane can be considered as a representative which shows the mutual relationships of the skeletal components.

• Radiation Oncology Journal
• /
• v.37 no.2
• /
• pp.134-142
• /
• 2019

Purpose: The aim is to study the dependence of deformable based auto-segmentation of head and neck organs-at-risks (OAR) on anatomy matching for a single atlas based system and generate an acceptable set of contours. Methods: A sample of ten patients in neutral neck position and three atlas sets consisting of ten patients each in different head and neck positions were utilized to generate three scenarios representing poor, average and perfect anatomy matching respectively and auto-segmentation was carried out for each scenario. Brainstem, larynx, mandible, cervical oesophagus, oral cavity, pharyngeal muscles, parotids, spinal cord, and trachea were the structures selected for the study. Automatic and oncologist reference contours were compared using the dice similarity index (DSI), Hausdroff distance and variation in the centre of mass (COM). Results: The mean DSI scores for brainstem was good irrespective of the anatomy matching scenarios. The scores for mandible, oral cavity, larynx, parotids, spinal cord, and trachea were unacceptable with poor matching but improved with enhanced bony matching whereas cervical oesophagus and pharyngeal muscles had less than acceptable scores for even perfect matching scenario. HD value and variation in COM decreased with better matching for all the structures. Conclusion: Improved anatomy matching resulted in better segmentation. At least a similar setup can help generate an acceptable set of automatic contours in systems employing single atlas method. Automatic contours from average matching scenario were acceptable for most structures. Importance should be given to head and neck position during atlas generation for a single atlas based system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.510-518
• /
• 2009

Purpose: In this study, we analyzed and compared the anatomical position of the mandibular canal in normal occlusion and mandibular prognathism patients. Patients and Methods: Computed tomography image from 58 patients were divided into normal occlusion group and mandibular prognathism group, and each measurement were taken in the each measuring points(2nd premolar, 1st molar, 2nd molar, 3rd molar, ramus). Measurements were statistically analyzed by student's t-test. Results: BC (Thickness of the buccal cortex) value was 2.3~2.7 mm, CB (Distance from the canal to the lingual aspect of the buccal cortex) value was 1.3~4.3 mm, MC (Diameter of the canal) value was 3.2~3.8 mm, LI (Distance from the canal to the lingual aspect of the lingual cortex) value was 2.0~3.7 mm, TM (Thickness of the total mandible) value was 9.5~12.9 mm and CM (Distance from the canal to the inferior border of the mandible) value was 6.9~17.5 mm. Conclusion: In the comparison between two groups, there was statistically significant difference in CB value of 2nd, 3rd molar between normal occlusion and mandibular prognathism, and other value in the rest of the measuring points didn't show statistically significant difference.